Stillen v3 Blower Issue

redondoaveb · 04-20-2020, 11:59 PM

Quote:

Originally Posted by Chernandez22

Ahhh okay thank you! I'll give 928 Motorsports a call tomorrow! Might just ask for the super-vortech upgrade... lol
https://928motorsports.com/parts/super_vortech.php

Talk to Carl. They did the super vortech upgrade on mine.

turtle64b · 04-21-2020, 11:55 AM

Looking at those pictures and based on what Vortech said, I'd be really pissed at the person you bought it from... If I recall right, there's literally a yellowish-orange tag on the shipping plug that says "remove me". I'm sorry about your bad fortune.

A V3 with the Si impeller and the 928 bearings seems to be the ideal setup for the blower. The Si impeller flows a little better and the 928 bearings allow you to overspin it.

Good luck!

TopgunZ · 04-21-2020, 01:24 PM

Hey Chernandezz22. I can get you a new blower if you need one. It will be an upgrade from what you currently have also. PM me for pricing.

redondoaveb · 04-21-2020, 01:54 PM

Quote:

Originally Posted by turtle64b

Looking at those pictures and based on what Vortech said, I'd be really pissed at the person you bought it from... If I recall right, there's literally a yellowish-orange tag on the shipping plug that says "remove me". I'm sorry about your bad fortune.

A V3 with the Si impeller and the 928 bearings seems to be the ideal setup for the blower. The Si impeller flows a little better and the 928 bearings allow you to overspin it.

Good luck!

You know what the funny thing is. When my blower was blowing a lot of oil out of the vent plug (3.47 jackshaft/2.85 sc pulley). I called vortech and talked to one of their engineers who said that they've seen guys run their blowers with the shipping plug in with no issues. I didn't want to take the chance so I installed a 3.00 sc pulley instead.

turtle64b · 04-21-2020, 03:49 PM

Quote:

Originally Posted by redondoaveb

You know what the funny thing is. When my blower was blowing a lot of oil out of the vent plug (3.47 jackshaft/2.85 sc pulley). I called vortech and talked to one of their engineers who said that they've seen guys run their blowers with the shipping plug in with no issues. I didn't want to take the chance so I installed a 3.00 sc pulley instead.

I stand corrected haha.

I personally wouldn't want to run with the plug in since when the oil heats up and pressure builds, it has nowhere to go. I think this puts more pressure on components that weren't necessarily meant to see that pressure. My 2 cents.

Chernandez22 · 04-21-2020, 04:21 PM

I've been talking to Carl. He asked about the condition on the shafts since 928 can't get replacement shafts. Then after talking with Vortech, they gave me the bad news that they are also damaged..

Apparently the pulley was changed at some point and then changed back to the original one since there's a missing seal on the pulley bolt according to Vortech. The previous owner apparently doesn't have any receipts of the work done so I'm not sure who has worked on what. v7.jpg

redondoaveb · 04-21-2020, 04:38 PM

Quote:

Originally Posted by Chernandez22

I've been talking to Carl. He asked about the condition on the shafts since 928 can't get replacement shafts. Then after talking with Vortech, they gave me the bad news that they are also damaged..

Apparently the pulley was changed at some point and then changed back to the original one since there's a missing seal on the pulley bolt according to Vortech. The previous owner apparently doesn't have any receipts of the work done so I'm not sure who has worked on what. Attachment 142064

PM Topgunz per his above post. He'll work with you on getting you a new blower.

redondoaveb · 04-21-2020, 04:42 PM

Quote:

Originally Posted by turtle64b

I stand corrected haha.

I personally wouldn't want to run with the plug in since when the oil heats up and pressure builds, it has nowhere to go. I think this puts more pressure on components that weren't necessarily meant to see that pressure. My 2 cents.

According to the vortech engineer I talked to, there is very little pressure build up. I wasn't willing to take the risk either. I did think about fabricating a pressure gauge set up that would screw into the vent port to see what kind of internal pressure the blower does produce but I never followed up.

Chernandez22 · 04-21-2020, 04:48 PM

Yes we just sent each other a PM. Thanks everyone. Once this is all resolved and I get a new blower installed, what should the next steps be? Should I head over to SpecialtyZ and get it looked over? Not sure what would be a good starting point after this.

redondoaveb · 04-21-2020, 06:11 PM

Quote:

Originally Posted by Chernandez22

Yes we just sent each other a PM. Thanks everyone. Once this is all resolved and I get a new blower installed, what should the next steps be? Should I head over to SpecialtyZ and get it looked over? Not sure what would be a good starting point after this.

You can never go wrong with Specialty Z. It probably wouldn't hurt to have them look it over and then tune it. Better make an appointment now. I'm not sure how busy they are right now but there's usually about a 2 month wait.

INFmstrTech · 06-03-2020, 08:41 AM

My V3 ate its own oil slinger. Bits of the slinger forge weeded themselves to the inspiration shaft gear. First I thought it was just bearings that were shot since I’m overspinning. 3.47 jackshaft and 2.95 s/c pulley. Apparently the factory vortech oil slinger is prone to failure.. 928 offers a high speed oil slinger that can take the abuse-see last picture. Anyways I used a jewelers file to get all the bits off. Put back together. And it sounds like garbage. No metal in oil no abnormal power loss just sounds like crap.

FC73859F-30F6-421A-826C-1C332C347A88.jpeg

AF1460AC-B6E7-4CE4-9B0A-E59C8882D726.jpg

0D91AD12-7061-469C-ACC5-BD0BF3E9140F.jpeg

E6F60342-B1C7-4955-AE9B-8EACDE620004.jpeg

TopgunZ · 06-03-2020, 09:09 AM

With that setup you are overspinning by 10,000rpms. That is pretty rough on things as 928 doesnt fully understand how these work.

The biggest problem with highly overspinning the unit is that the oil is not designed for this. It aerates and becomes "whipped" inside. This then creates a ton of heat and the oil cannot properly cool down the unit. So no matter what material 928 states they can put in there you will always have problems with spinning it that fast.

There is no warranty with 928. I have seen impellers blow apart from them. I have seen head units only run for 1000 miles from them.

Stay with the V3 Si and keep your warranty.

You are pulling in 15psi with that highly restrictive KN filter from my old kits. My new velocity intake can make close to that (14psi) while spinning it at safe levels and im guessing at least 17-18psi if overspinning by 10k.

redondoaveb · 06-03-2020, 10:41 AM

The factory oil slinger is prone to failure regardless of how fast the blower is spinning. Not to say that couldn't have contributed to your issue.

Aaron is correct about the oil aerating and not lubricating properly. That was verified with vortech. Fortunately, mine never had that issue, maybe due to the ceramic bearings I had installed.

My 928 impeller had a vane break off and the sc ate it. I haven't opened it up yet to find what damage it did, but it's noisy as hell too. I'm hoping it's rebuildable. Carl at 928 was sent pictures of the impeller and he never accepted responsibilty, he just told me not to run it anymore (no sh1t Carl). I'll never do business with 928 again.

It sounds to me like your bearings are bad, I've seen where oil slingers have failed and metal particals have gotten into the bearings.

If you want to overspin the sc like I was doing also, go to the V2 H/D Ti like Aaron recommended to me. It has heavy duty bearings and although it's rated 52000rpm, vortech verified it can be spun at 60000 with no issues. It's also external oil fed so you won't have the aeration issues that the V3 has.

Edit: The V3 oil slinger isn't prone to failure as I stated above. They have been known to fail.

bcfromfl · 06-03-2020, 04:13 PM

Quote:

Originally Posted by redondoaveb

Edit: The V3 oil slinger isn't prone to failure as I stated above. They have been known to fail.

My apologies, but I'm having a little difficulty understanding what you meant here.

redondoaveb · 06-03-2020, 06:13 PM

Quote:

Originally Posted by bcfromfl

My apologies, but I'm having a little difficulty understanding what you meant here.

I've heard of them failing but they aren't prone to failure (they don't fail on a regular basis). It's not like there's a defect in them and that causes them to fail.

04-21-2020, 11:55 AM	#17 (permalink)
turtle64b Track Member Join Date: Jun 2015 Location: Granbury, TX Posts: 550 Drives: '11 SC Blue 7AT Rep Power: 3366	Looking at those pictures and based on what Vortech said, I'd be really pissed at the person you bought it from... If I recall right, there's literally a yellowish-orange tag on the shipping plug that says "remove me". I'm sorry about your bad fortune. A V3 with the Si impeller and the 928 bearings seems to be the ideal setup for the blower. The Si impeller flows a little better and the 928 bearings allow you to overspin it. Good luck! redondoaveb and "Z"en like this.

04-21-2020, 01:24 PM	#18 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Hey Chernandezz22. I can get you a new blower if you need one. It will be an upgrade from what you currently have also. PM me for pricing. wideglideleon, redondoaveb, "Z"en and 1 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-21-2020, 04:21 PM	#21 (permalink)
Chernandez22 Base Member Join Date: Feb 2020 Location: California Posts: 8 Drives: 14 Nissan 370Z M6 Rep Power: 5	I've been talking to Carl. He asked about the condition on the shafts since 928 can't get replacement shafts. Then after talking with Vortech, they gave me the bad news that they are also damaged.. Apparently the pulley was changed at some point and then changed back to the original one since there's a missing seal on the pulley bolt according to Vortech. The previous owner apparently doesn't have any receipts of the work done so I'm not sure who has worked on what. v7.jpg redondoaveb and "Z"en like this. Last edited by Chernandez22; 04-21-2020 at 04:21 PM. Reason: Incorrect quotes

04-21-2020, 04:48 PM	#24 (permalink)
Chernandez22 Base Member Join Date: Feb 2020 Location: California Posts: 8 Drives: 14 Nissan 370Z M6 Rep Power: 5	Yes we just sent each other a PM. Thanks everyone. Once this is all resolved and I get a new blower installed, what should the next steps be? Should I head over to SpecialtyZ and get it looked over? Not sure what would be a good starting point after this. wideglideleon likes this.

06-03-2020, 08:41 AM	#26 (permalink)
INFmstrTech Base Member Join Date: Nov 2018 Location: Near Frisco, TX Posts: 42 Drives: 08coupe, 07sedan Rep Power: 6743	My V3 ate its own oil slinger. Bits of the slinger forge weeded themselves to the inspiration shaft gear. First I thought it was just bearings that were shot since I’m overspinning. 3.47 jackshaft and 2.95 s/c pulley. Apparently the factory vortech oil slinger is prone to failure.. 928 offers a high speed oil slinger that can take the abuse-see last picture. Anyways I used a jewelers file to get all the bits off. Put back together. And it sounds like garbage. No metal in oil no abnormal power loss just sounds like crap. FC73859F-30F6-421A-826C-1C332C347A88.jpeg AF1460AC-B6E7-4CE4-9B0A-E59C8882D726.jpg 0D91AD12-7061-469C-ACC5-BD0BF3E9140F.jpeg E6F60342-B1C7-4955-AE9B-8EACDE620004.jpeg __________________ ‘08 coupe w/Stillen SC, Custom A2A, SD, ID1050x, e85, eagle rods, high temp coated pistons, P&P heads, JWT C2, manual swap, stage 2 clutch. EcuTek(Eugene)

06-03-2020, 09:09 AM	#27 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	With that setup you are overspinning by 10,000rpms. That is pretty rough on things as 928 doesnt fully understand how these work. The biggest problem with highly overspinning the unit is that the oil is not designed for this. It aerates and becomes "whipped" inside. This then creates a ton of heat and the oil cannot properly cool down the unit. So no matter what material 928 states they can put in there you will always have problems with spinning it that fast. There is no warranty with 928. I have seen impellers blow apart from them. I have seen head units only run for 1000 miles from them. Stay with the V3 Si and keep your warranty. You are pulling in 15psi with that highly restrictive KN filter from my old kits. My new velocity intake can make close to that (14psi) while spinning it at safe levels and im guessing at least 17-18psi if overspinning by 10k. Rusty, wideglideleon, elhombre and 1 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 06-03-2020 at 10:51 AM.

06-03-2020, 10:41 AM	#28 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,366 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	The factory oil slinger is prone to failure regardless of how fast the blower is spinning. Not to say that couldn't have contributed to your issue. Aaron is correct about the oil aerating and not lubricating properly. That was verified with vortech. Fortunately, mine never had that issue, maybe due to the ceramic bearings I had installed. My 928 impeller had a vane break off and the sc ate it. I haven't opened it up yet to find what damage it did, but it's noisy as hell too. I'm hoping it's rebuildable. Carl at 928 was sent pictures of the impeller and he never accepted responsibilty, he just told me not to run it anymore (no sh1t Carl). I'll never do business with 928 again. It sounds to me like your bearings are bad, I've seen where oil slingers have failed and metal particals have gotten into the bearings. If you want to overspin the sc like I was doing also, go to the V2 H/D Ti like Aaron recommended to me. It has heavy duty bearings and although it's rated 52000rpm, vortech verified it can be spun at 60000 with no issues. It's also external oil fed so you won't have the aeration issues that the V3 has. Edit: The V3 oil slinger isn't prone to failure as I stated above. They have been known to fail. Rusty, Optimiser and "Z"en like this. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp Last edited by redondoaveb; 06-03-2020 at 11:03 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AC/heater blower issue	edliaszenik	Nissan 370Z General Discussions	3	11-08-2017 12:22 PM
stillen gen 3 intake issue!	jamesj1996	Intake/Exhaust	9	06-23-2014 08:38 AM
Vq35hr 20psi stillen blower	Masterbeatty	Forced Induction	94	05-23-2014 07:18 PM
AC Issue with Stillen Gen 3	Advan	Texas	10	04-27-2014 01:48 PM
My Stillen blower blew up :(	FireDan50	Forced Induction	20	08-22-2013 07:05 AM