The 2020 370z needs a DCT

takemorepills · 02-01-2021, 10:05 PM

Quote:

Originally Posted by phunk

Car has been driven. Seb has it performing shift cut too, which is great.. it cuts off power momentarily while alternating clutch packs. This was a feature I thought might take longer to get dialed in but he had it working first time out. Seb sounded really excited about it when I talked to him today, and said it makes the car so much nicer to drive around, and he expects he will drive the car a lot more often now. There are a couple small quirks he wants to work out and then he will have videos to share.

Does it cause the car to "fart"? Most cars with these trans will make a distinct "fart" sound during the engine cut, my 2016 GTI DSG would do it and I really liked it!
It was called "DSG Farts" in the VW/Audi community.

phunk · 02-02-2021, 03:26 PM

Quote:

Originally Posted by takemorepills

Does it cause the car to "fart"? Most cars with these trans will make a distinct "fart" sound during the engine cut, my 2016 GTI DSG would do it and I really liked it!
It was called "DSG Farts" in the VW/Audi community.

Seb said you can hear it, but he has not yet described the sound

Martijn_b · 02-02-2021, 07:44 PM

Very exciting! I have a DCT in my E90 M3, and thank god it doesnt fart.

Sent from my SM-G973F using Tapatalk

redondoaveb · 02-02-2021, 08:15 PM

Quote:

Originally Posted by phunk

Seb said you can hear it, but he has not yet described the sound

There's a mexican food restaurant close to Specialty Z. It may not have been the transmission.

DarkJak · 02-06-2021, 07:14 PM

I'm hoping for a driveshaft option for us 7AT guys too, just to eliminate one more thing to figure out.

What are your thoughts on transmission cooling? I have a 25 row on the current 7AT. Sufficient for the DCT even at higher power levels at the track?

phunk · 02-06-2021, 07:36 PM

Quote:

Originally Posted by DarkJak

I'm hoping for a driveshaft option for us 7AT guys too, just to eliminate one more thing to figure out.

What are your thoughts on transmission cooling? I have a 25 row on the current 7AT. Sufficient for the DCT even at higher power levels at the track?

a 7AT would use the same driveshaft since it has the same differential case and pinion flange. The only thing that may be different about the 7AT car install is going to be on the electronics side. There will likely be some different DTC codes than the manual car, and the way the gear position indicator in the cluster is wired is very different. But as far as physical installation of the trans, it should be identical.

For cooling, I dont have any good answers for that since we haven't used the trans for anything other than driving around on the street for a total of maybe 45 min so far!

Seb was going into high power with it today, and still loves it. He does unfortunately need to tear it down and go inside the electronics on the side of the trans to make an electrical repair where the transmissions previous owner's wiring is causing an intermittent short that is blowing the TCM fuse randomly. He bought the trans from someone who was swapping it into another car, and had already performed the internal wiring. Apparently they didnt do a very good job so hes going to have to go in. Good for experience at least.

phunk · 02-08-2021, 12:26 AM

Welp, he has already removed the trans, located the wiring short, and repaired it. He plans to put the trans back in and be back on the road for more testing this week. He’s just letting it sit a day or two for the epoxy that is sealing the wiring to settle.

It’s possible that this might be finished in it’s minimalist form. Then we can look into cool finishing touches. I am dying to see some video of shifting under high throttle.

Rusty · 02-08-2021, 12:46 AM

Martijn_b · 02-08-2021, 09:59 AM

I read every single update on this build. Looking forward to more action :-)

Sent from my SM-G973F using Tapatalk

phunk · 02-09-2021, 12:27 AM

And the test car is back on the road! It’s going good. I just received a couple vids of him going through a few gears in low boost taking it a little easy. Im leaning into him for some more spicy footage! If all stays well for this round, I hope to get him to try full send any day.

redondoaveb · 02-09-2021, 10:20 AM

Quote:

Originally Posted by phunk

And the test car is back on the road! It’s going good. I just received a couple vids of him going through a few gears in low boost taking it a little easy. Im leaning into him for some more spicy footage! If all stays well for this round, I hope to get him to try full send any day.

Seb posted a video on their Instagram story

Spooler · 02-09-2021, 11:10 AM

Quote:

Originally Posted by redondoaveb

Seb posted a video on their Instagram story

Off to go take a peak.

Hotrodz · 04-14-2021, 10:05 AM

Hey phunk! I know you got a lot of irons in the fire but you need to get this conversion kit going like yesterday. I got to take a ride with Seb a week ago and all I can say is holy crap. It was phenomenal!!! The shifts were amazingly quick and the acceleration was seamless and powerful all the way through the gears. There is nothing like being pinned to the back of the seat for the whole run through the gears. I was speechless and didn't get any video because I was just so blow away and waiting for the next run. I know there are a few idiosyncrasies that Seb is working out but...come on man, this is a game changer for sure!!!

phunk · 04-14-2021, 01:55 PM

Quote:

Originally Posted by Hotrodz

Hey phunk! I know you got a lot of irons in the fire but you need to get this conversion kit going like yesterday. I got to take a ride with Seb a week ago and all I can say is holy crap. It was phenomenal!!! The shifts were amazingly quick and the acceleration was seamless and powerful all the way through the gears. There is nothing like being pinned to the back of the seat for the whole run through the gears. I was speechless and didn't get any video because I was just so blow away and waiting for the next run. I know there are a few idiosyncrasies that Seb is working out but...come on man, this is a game changer for sure!!!

Thanks for the push! I definitely lost some of my momentum on the project while waiting for final install and testing and then started putting my energy into other places. The other day Seb was starting to ask me about production parts too. So I cleaned off my CAD desk at home and gathered all my files and notes from machining.

I need to spend a few hours and make a new "final edition" CAD file set that takes in the things I changed while machining and test fitting, which fortunately wasn't much. With that made, I am going to hand the files over to a machine shop to produce the adapter.

I decided against machining them in-house. Aside from having my hands full on production, I really didnt have parts of this shape and size in mind when I was purchasing machinery. So its a little cumbersome for me to make anyway. Production will go start to finish much quicker this way than waiting for me.

Once I clean up the CAD, I think I could get finished parts in 6 weeks maybe less.

Hotrodz · 04-14-2021, 02:05 PM

That sounds awesome! I know Seb has received a bunch of inquiries since he last posted Instagram. He has received over 3400 views on his last post of his test drive. Check it out if you get a chance!

Sent from my SM-G965U using Tapatalk

02-02-2021, 07:44 PM	#138 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	Very exciting! I have a DCT in my E90 M3, and thank god it doesnt fart. Sent from my SM-G973F using Tapatalk phunk, AlWakRa, Hotrodz and 3 others like this. __________________ Instagram: Boosted_Fairlady

02-06-2021, 07:14 PM	#140 (permalink)
DarkJak A True Z Fanatic Join Date: Jun 2011 Location: Madison, WI Posts: 1,397 Drives: 2009 370Z Rep Power: 16804	I'm hoping for a driveshaft option for us 7AT guys too, just to eliminate one more thing to figure out. What are your thoughts on transmission cooling? I have a 25 row on the current 7AT. Sufficient for the DCT even at higher power levels at the track? __________________ @stupidtoycars \| My track vids 09 7AT\|MCS 2WNR\|Topgunz Rotrex\|Ecutek (Eugene)\|Maxxis RC1\|Titan-7 TS-5\|OSG LSD\|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler\|Fismo\|G-LOC R12/R10\|Zeta III L\|NLR Wing and Splitter\|CJM Pan and Fuel Hat\|Radium Surge Tank\|AP Racing CP9668

02-08-2021, 12:26 AM	#142 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Welp, he has already removed the trans, located the wiring short, and repaired it. He plans to put the trans back in and be back on the road for more testing this week. He’s just letting it sit a day or two for the epoxy that is sealing the wiring to settle. It’s possible that this might be finished in it’s minimalist form. Then we can look into cool finishing touches. I am dying to see some video of shifting under high throttle. FL 4Motion, Spec Jay, andy_meng1024 and 11 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

02-08-2021, 12:46 AM	#143 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,186 Drives: 2011 Nismo GM 6M Rep Power: 2684437	phunk and DarkJak like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-08-2021, 09:59 AM	#144 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	I read every single update on this build. Looking forward to more action :-) Sent from my SM-G973F using Tapatalk phunk, DarkJak, Rusty and 4 others like this. __________________ Instagram: Boosted_Fairlady

02-09-2021, 12:27 AM	#145 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	And the test car is back on the road! It’s going good. I just received a couple vids of him going through a few gears in low boost taking it a little easy. Im leaning into him for some more spicy footage! If all stays well for this round, I hope to get him to try full send any day. JARblue, DarkJak, Rusty and 4 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

04-14-2021, 10:05 AM	#148 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Hey phunk! I know you got a lot of irons in the fire but you need to get this conversion kit going like yesterday. I got to take a ride with Seb a week ago and all I can say is holy crap. It was phenomenal!!! The shifts were amazingly quick and the acceleration was seamless and powerful all the way through the gears. There is nothing like being pinned to the back of the seat for the whole run through the gears. I was speechless and didn't get any video because I was just so blow away and waiting for the next run. I know there are a few idiosyncrasies that Seb is working out but...come on man, this is a game changer for sure!!! FL 4Motion, phunk, DarkJak and 6 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

04-14-2021, 02:05 PM	#150 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	That sounds awesome! I know Seb has received a bunch of inquiries since he last posted Instagram. He has received over 3400 views on his last post of his test drive. Check it out if you get a chance! Sent from my SM-G965U using Tapatalk DarkJak, Rusty, axmea? and 5 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2020 nissan 370z nismo 6spd	ABUNAI NISMO	New Nismo 370Z Owner	11	01-16-2020 02:05 AM
2020 nissan 370z nismo 6spd	ABUNAI NISMO	Introduction	2	01-10-2020 06:42 AM
New savagegeese review of 2020 370Z	analogman	Nissan 370Z General Discussions	50	10-30-2019 03:10 PM
Is the 2020 Nissan 370Z the last analog car?	danegrey	Nissan 370Z General Discussions	24	07-21-2019 09:47 PM
MY 2020 370z Arrived Yesterday!	SomeBoredGuy	Nissan 370Z General Discussions	67	05-14-2019 09:53 PM