what parts are needed to increase boost for Stillen Supercharger

DUSHER · 12-29-2019, 03:59 PM

Quote:

Originally Posted by redondoaveb

Yes sir, that's it.

thank you very much for the help. Will I have to change out the impeller with the new pulleys or should I be good?

"Z"en · 12-29-2019, 04:12 PM

Quote:

Originally Posted by DUSHER

thank you very much for the help. Will I have to change out the impeller with the new pulleys or should I be good?

It depends on your boost goal. But for other parts in its internal, the stock head unit won't hold up for long if your using exactly the same setup as that redondoaveb is having. He ran and will be running 928's rebuilt blower.

redondoaveb · 12-29-2019, 04:23 PM

Quote:

Originally Posted by DUSHER

thank you very much for the help. Will I have to change out the impeller with the new pulleys or should I be good?

Do you have the Sci or Si blower. If you have the Si then I wouldn't change the impeller.

redondoaveb · 12-29-2019, 04:25 PM

Quote:

Originally Posted by "Z"en

It depends on your boost goal. But for other parts in its internal, the stock head unit won't hold up for long if your using exactly the same setup as that redondoaveb is having. He ran and will be running 928's rebuilt blower.

Of course the 2.85 is going to overspin the blower so the ceramic bearings would be a good upgrade. But, Seb had told me that he knows a few people that are overspinning it with the stock bearings and they haven't had any issues.

"Z"en · 12-29-2019, 04:47 PM

Quote:

Originally Posted by redondoaveb

Of course the 2.85 is going to overspin the blower so the ceramic bearings would be a good upgrade. But, Seb had told me that he knows a few people that are overspinning it with the stock bearings and they haven't had any issues.

I got one blown away with oil coming out of the shaft seal on stock internal for that RPM. So I'd not feel comfortable without the internal upgrades. With the Si and 9lb pulley, he will be seeing a little less than 11psi. This would suffice for most of the owners dding their cars.

redondoaveb · 12-29-2019, 05:16 PM

Quote:

Originally Posted by "Z"en

I got one blown away with oil coming out of the shaft seal on stock internal for that RPM. So I'd not feel comfortable without the internal upgrades. With the Si and 9lb pulley, he will be seeing a little less than 11psi. This would suffice for most of the owners dding their cars.

True. That combo netted me 540whp on e85

"Z"en · 12-29-2019, 05:19 PM

Quote:

Originally Posted by redondoaveb

True. That combo netted me 540whp on e85

It's a hella good number!

redondoaveb · 12-29-2019, 05:47 PM

Quote:

Originally Posted by "Z"en

It's a hella good number!

470 on 91, 540 on e85. Not bad for 10.2 psi

DUSHER · 12-29-2019, 09:04 PM

Quote:

Originally Posted by redondoaveb

Do you have the Sci or Si blower. If you have the Si then I wouldn't change the impeller.

its a Sci

Senna-F1 · 12-29-2019, 10:04 PM

You’re gonna want a much better intake with a big air filter. Others, including myself, have proven this is the best way to increase boost.

redondoaveb · 12-29-2019, 10:17 PM

Quote:

Originally Posted by DUSHER

its a Sci

I would upgrade to the Si impeller if it were me.

redondoaveb · 12-29-2019, 10:24 PM

Quote:

Originally Posted by Senna-F1

You’re gonna want a much better intake with a big air filter. Others, including myself, have proven this is the best way to increase boost.

A better intake and larger filter will definitely increase boost over the stock filter, no one has posted any dyno comparisons though.

Senna-F1 · 12-29-2019, 10:45 PM

Are you doubting that an increase in boost results in an increase in power? Because that seems to be the whole presumption of this entire thread. “Parts needed to increase boost”. I assume he’s asking how to increase boost because he thinks the result will be an increase in power. If there is any doubt that will be the case, maybe we shouldn’t be recommending a different pulley either. Unless someone has a back to back dyno with a different pulley? Does that exist somewhere? I haven’t seen it. But even if he’s not looking for an increase in power, I addressed just his request for an increase in boost, and didn’t mention power.

Sent from my iPhone using Tapatalk

redondoaveb · 12-29-2019, 11:03 PM

Quote:

Originally Posted by Senna-F1

Are you doubting that an increase in boost results in an increase in power? Because that seems to be the whole presumption of this entire thread. “Parts needed to increase boost”. I assume he’s asking how to increase boost because he thinks the result will be an increase in power. If there is any doubt that will be the case, maybe we shouldn’t be recommending a different pulley either. Unless someone has a back to back dyno with a different pulley? Does that exist somewhere? I haven’t seen it. But even if he’s not looking for an increase in power, I addressed just his request for an increase in boost, and didn’t mention power.

Sent from my iPhone using Tapatalk

I've done pulley upgrades and have the dyno sheets showing the results. They've been posted on the forum. No one is doubting that a different intake and larger filter will increase boost over the stock filter, I would just like to see comparisons. It might convince me to go back to a filter. I actually posted a dyno sheet comparing two screens, the turbo guard against the ngr screen. It showed a 1 psi and 30whp loss with the ngr screen. Here it is.

Senna-F1 · 12-29-2019, 11:12 PM

Quote:

Originally Posted by redondoaveb

For flex fuel you will need the Zeitronix ECA-2. I'll find the links for the pulleys.

Another option for flex, especially if you’re getting a gauge of some kind is an ECB-1. With that setup, I did not need any additional electronics, like the ECA-2.

https://www.innovatemotorsports.com/products/ecb1.php

I would just like to mention to all, that with Flex fuel , the electronics for whatever you use to monitor ethanol, need to be powered DURING cranking, when most accessories shut off. So my gauge for example, which tells the ECU how much E% I have, is powered when the fuel pump turns on.

12-29-2019, 10:45 PM	#43 (permalink)
Senna-F1 Enthusiast Member Join Date: Jun 2016 Location: Cary, NC Age: 53 Posts: 425 Drives: 370SC,EliseSC,MR2T Rep Power: 50	Are you doubting that an increase in boost results in an increase in power? Because that seems to be the whole presumption of this entire thread. “Parts needed to increase boost”. I assume he’s asking how to increase boost because he thinks the result will be an increase in power. If there is any doubt that will be the case, maybe we shouldn’t be recommending a different pulley either. Unless someone has a back to back dyno with a different pulley? Does that exist somewhere? I haven’t seen it. But even if he’s not looking for an increase in power, I addressed just his request for an increase in boost, and didn’t mention power. Sent from my iPhone using Tapatalk __________________ 618 WHP.452 WTQ.4" Python Intake.15 psi.e50.Topgunz SC.SOHO Tune.S1SE.STG 4 Clutch.Motordyne LTH/Test Pipes/Exhaust.485 Pump.1050x

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Supercharger boost	NoAiMiSe1	Forced Induction	15	08-28-2017 12:24 PM
[FOR SALE] Stillen supercharger w/ frozen boost	KingZ	Parts for sale (Private Classifieds)	27	04-02-2016 02:14 AM
[FOR SALE] Froozen boost intercooler For stillen supercharger	EVOHUNTER	Parts for sale (Private Classifieds)	2	11-06-2015 10:42 AM
More boost Stillen SuperCharger kit	teknoprep	Engine & Drivetrain	29	05-21-2015 01:20 AM
Stillen Supercharger Froozen Boost Intercooler Install	EVOHUNTER	DIY Section (Do-It-Yourself)	0	05-16-2015 11:01 AM

12-29-2019, 10:04 PM	#40 (permalink)
Senna-F1 Enthusiast Member Join Date: Jun 2016 Location: Cary, NC Age: 53 Posts: 425 Drives: 370SC,EliseSC,MR2T Rep Power: 50	You’re gonna want a much better intake with a big air filter. Others, including myself, have proven this is the best way to increase boost.