what parts are needed to increase boost for Stillen Supercharger

DUSHER

As of right now I have the following parts/upgrades on my car:

• Stillen supercharger
• topgunz air to air upgrade
• walbro 520
• ID1050x injectors
• CJM twin fuel pump
• CJM S1.SE return system
• Motordyne cats and catback exhaust
• Stillen headers

I've read over 50 pages on the A2A thread and cant get a definitive answer on what parts are needed. I'm looking to get around 500-550hp. Also I will be running 91. Also Seb is currently tuning my car. Thanks for the help!

nic370

How much power are you planning to make ?
That would tend to determine what upgrades are needed



Sent from my SM-G960F using Tapatalk

DUSHER

good point and I was just thinking about adding that. Would be happy to be around 500-550. Will be running 91 octane unless you guys recommend other wise.

redondoaveb

13 psi is about the max you'll be able to run on 91 octane. With the 9lb pulley and a 2.85 sc pulley, my car made 12.86 psi and 586whp on e85 with the same upgrades that you have. I can't remember what my 91 octane numbers were but was probably a little over 500.

I would go flex fuel. 91 and e85.

__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp

redondoaveb

You list a single walbro 520 but then you show a CJM twin pump. Why would you have a twin pump set up with a single pump?

__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp

DUSHER

I got the twin fuel pump assembly for a pretty good price. Also when I took out my stock pump assembly the rods were already broken. So instead of buying a new nissan oem assembly I just bought the twin assembly for a good price.

redondoaveb

And when you want to go for big power (and you will), you'll need twin pumps.

__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp

DUSHER

After reading spooler's thread I dont think that will be the case. I dont feel like replacing the block lol.

redondoaveb

You'd never be making enough boost to lift the heads.

__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp

nic370

Haven't our engine's been known to do that around 12/13 psi

Sent from my SM-G960F using Tapatalk

redondoaveb

Not sure but mine had no issues at 16.5.

__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp

nic370

That's good to know

Sent from my SM-G960F using Tapatalk

"Z"en

It depends on what fuel your using. Boost pressure is knock limited.

__________________
610whp/462wtq A2A- 6.8s@100-200km (stock motor) / IG: minized123456 / 淬 Custom VQ Vortech-based supercharger parts made to order! https://www.instagram.com/p/CFUjDc5H...d=m0unws28pvk4

nic370

Here in uk its 99 octane
I believe that's like your 91

Sent from my SM-G960F using Tapatalk

"Z"en

Single 520 paired with 1050 is way overkill for 91. Not good to run rich in low boost.

__________________
610whp/462wtq A2A- 6.8s@100-200km (stock motor) / IG: minized123456 / 淬 Custom VQ Vortech-based supercharger parts made to order! https://www.instagram.com/p/CFUjDc5H...d=m0unws28pvk4