Announcing TopgunZ ACE Supercharger Kit!
 

Introducing the TopgunZ ACE kit!

We all know how much of an improvement my original Air to Air kit released in 2015 was over the Water to Air on the Stillen kit. The extra power it could handle placed the centrifugal supercharger into a whole new level for the VQ37VHR platform. With the addition of several power upgrades I came out with a full Topgunz supercharger kit and I have sold many of those kits.

As always, there was room for improvement.

Customer feedback:
Problem: The Y pipe design isn’t the greatest as it still is not a true dual intake setup from the intercooler and can be difficult to get installed.

Solution: Build a kit that is a true dual intake setup and easier to install

Problem: The Stillen manifold is very hard to install with those blind bolts.

Solution: Delete the Stillen manifold and use the proven OEM manifold.

Problem: The MAF and Throttle Body extension harnesses go bad all the time!

Solution: Delete the MAF and TB extension harnesses

Problem: Cutting into the pinch weld of the frame is hard to get to and is a headache.

Solution: No need to cut into the frame.

Problem: The intercooler on the first Topgun kit isn’t as big as I'd like since I am going for over 600whp.

Solution: Utilize the biggest interooler that will fit.

Problem: The intake filter is restrictive and requires the removal of the supercharger to clean.

Solution: Create a high flowing metal intake that allows the use of a giant filter in a place easy to access.

Problem: I already have Uprev and like my Uprev tuner but the MAF's max out.

Solution: Upgrade to 3" intake pipes

Dyno results to follow. Pricing and Sales will start soon. Expect similar pricing as previous kit.

Full Turn Key Kits will be available with Custom tune!

http://www.the370z.com/members/topgu...3503-front.jpg

http://www.the370z.com/members/topgu...river-side.jpg

http://www.the370z.com/members/topgu...enger-side.jpg

http://www.the370z.com/members/topgu...103506-top.jpg

Yeeeeees you know im waiting

Sent from my SM-G960F using Tapatalk

Look forward to the results :tup:

It's been hard keeping this under wraps :tup: Glad I can start passing the word now. Definitely looking forward to dyno results.

Finally! Nice to see its finally made public now I don't have to keep sending you weekly texts LOL.

Awesome!!!

How will we go about running an speed density tune
Is there somewhere in the manifold to run a map sensor

Sent from my SM-G960F using Tapatalk

Yes, there is a factory MAP sensor in the manifold already. It just needs to be swapped to one with a higher range. (Omni 4 bar).

Nice

Sent from my SM-G960F using Tapatalk

Aaron, where will the coolant overflow tank be relocated to?

are you going to be selling this setup separate?

Can’t wait to see dyno results!

It will sit in that area between the passenger side intake and the engine.

Yes, this kit will be a conversion kit for those with the stillen water kit.

Me either!

Do you have a dyno date? Will it only have the 9lb pulley upgrade for the dyno run?

I like the shot capturing part of your FARO arm. Did you use the scanning tool?