Announcing TopgunZ ACE Supercharger Kit!

ABUNAI NISMO · 04-24-2020, 07:14 PM

Looks great! I would probably go for a gunmetal or black piping! $150 seems more than reasonable too!

I am planning on installing the CJM FRS and Z1 34 row oil cooler this upcoming week. I too, am in preparation for this kit! What is not to love about it and the people behind the build

I already have the 1050X injectors but Aaron has recommended to opt for the 1300CC since I want to use E85 fuel. I have all stock internals and am willing to upgrade where needed. I may just see what happens with installing this kit with the stock TRANS, MOTOR, CLUTCH, LSD

I probably won't use all the power putting out...(I say that now)

I just passed 500 miles on my motor. I am trying to drive more but it is difficult because of the world now..Keep safe and healthy at home!

Tractionless · 04-24-2020, 10:20 PM

Any chance at a group buy discount soon?

redondoaveb · 04-24-2020, 10:36 PM

Quote:

Originally Posted by ABUNAI NISMO

Looks great! I would probably go for a gunmetal or black piping! $150 seems more than reasonable too!

I am planning on installing the CJM FRS and Z1 34 row oil cooler this upcoming week. I too, am in preparation for this kit! What is not to love about it and the people behind the build

I already have the 1050X injectors but Aaron has recommended to opt for the 1300CC since I want to use E85 fuel. I have all stock internals and am willing to upgrade where needed. I may just see what happens with installing this kit with the stock TRANS, MOTOR, CLUTCH, LSD

I probably won't use all the power putting out...(I say that now)

I just passed 500 miles on my motor. I am trying to drive more but it is difficult because of the world now..Keep safe and healthy at home!

You'll need to upgrade your clutch. Your 1050's are good for around 600whp on e85. What size fuel pump are you running?

ABUNAI NISMO · 04-25-2020, 12:11 AM

Walboro 450

redondoaveb · 04-25-2020, 12:37 AM

Quote:

Originally Posted by ABUNAI NISMO

Walboro 450

I ran 1050's with a walbro 450 up until I got into the mid 600's then I had to upgrade to 1300's and twin pumps.

V8Killer · 04-25-2020, 02:23 AM

Mine might be finished next Wednesday! Let’s goo boys!

TopgunZ · 04-25-2020, 09:39 AM

Quote:

Originally Posted by V8Killer

Mine might be finished next Wednesday! Let’s goo boys!

V8Killers build is going to be a great build to see what this kit can do with the right supporting mods. He wont be able to run E85 but I think there will be a race gas tune in there and some higher boost numbers.

Cant wait to see the results!!!

DUSHER · 04-27-2020, 12:32 PM

Quote:

Originally Posted by TopgunZ

V8Killers build is going to be a great build to see what this kit can do with the right supporting mods. He wont be able to run E85 but I think there will be a race gas tune in there and some higher boost numbers.

Cant wait to see the results!!!

I'll be running E85 on mine

TopgunZ · 04-27-2020, 12:45 PM

Quote:

Originally Posted by DUSHER

I'll be running E85 on mine

Do you have the Si headunit? The 2.9" serp pulley and anti-slip pulley?

DUSHER · 04-27-2020, 12:55 PM

Quote:

Originally Posted by TopgunZ

Do you have the Si headunit? The 2.9" serp pulley and anti-slip pulley?

have the upgraded si impeller. Not the belt pulleys. I'm demarsjcd btw so let me know about the pulleys

.

redondoaveb · 04-27-2020, 02:21 PM

Quote:

Originally Posted by DUSHER

have the upgraded si impeller. Not the belt pulleys. I'm demarsjcd btw so let me know about the pulleys

.

I think he may be talking about the 9lb pulley and extra tensioner pulley on the serpentine side.

TopgunZ · 04-28-2020, 08:41 AM

Quote:

Originally Posted by redondoaveb

I think he may be talking about the 9lb pulley and extra tensioner pulley on the serpentine side.

I am trying to get away from the "8psi" and "9psi" pulley terminology that stillen uses on their water to air kits. It confuses guys. I literally have guys always asking why they will only get 9psi and they want more.

redondoaveb · 04-28-2020, 10:18 AM

Quote:

Originally Posted by TopgunZ

I am trying to get away from the "8psi" and "9psi" pulley terminology that stillen uses on their water to air kits. It confuses guys. I literally have guys always asking why they will only get 9psi and they want more.

Want to really confuse them, call them the 2.87 jackshaft pulley on the serpentine side and the sti tensioner pulley.

V8Killer · 04-29-2020, 07:47 PM

Sent from my iPhone using Tapatalk

DUSHER · 04-30-2020, 11:05 PM

Not as pretty as V8Killer's but its getting there

04-24-2020, 07:14 PM	#271 (permalink)
ABUNAI NISMO Base Member Join Date: Nov 2019 Location: Irvine Posts: 69 Drives: 2020 NISMO BLK Rep Power: 6	Great idea! Looks amazing! Looks great! I would probably go for a gunmetal or black piping! $150 seems more than reasonable too! I am planning on installing the CJM FRS and Z1 34 row oil cooler this upcoming week. I too, am in preparation for this kit! What is not to love about it and the people behind the build I already have the 1050X injectors but Aaron has recommended to opt for the 1300CC since I want to use E85 fuel. I have all stock internals and am willing to upgrade where needed. I may just see what happens with installing this kit with the stock TRANS, MOTOR, CLUTCH, LSD I probably won't use all the power putting out...(I say that now) I just passed 500 miles on my motor. I am trying to drive more but it is difficult because of the world now..Keep safe and healthy at home! BOLIO 671, Rusty, TopgunZ and 2 others like this. Last edited by ABUNAI NISMO; 04-24-2020 at 07:17 PM.

04-24-2020, 10:20 PM	#272 (permalink)
Tractionless A True Z Fanatic Join Date: Jan 2016 Location: Atlantic SE Posts: 1,326 Drives: '10 K23 ST 7AT Rep Power: 30526	Any chance at a group buy discount soon? __________________ Toys Not Tots

04-25-2020, 12:11 AM	#274 (permalink)
ABUNAI NISMO Base Member Join Date: Nov 2019 Location: Irvine Posts: 69 Drives: 2020 NISMO BLK Rep Power: 6	Pump Walboro 450

04-25-2020, 02:23 AM	#276 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Mine might be finished next Wednesday! Let’s goo boys! KaienZ34, BOLIO 671, redondoaveb and 1 others like this. __________________ "Punch" Too much to list and a baby shot of nitrous....

04-29-2020, 07:47 PM	#284 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Sent from my iPhone using Tapatalk Rusty, TopgunZ, TBatt and 8 others like this. __________________ "Punch" Too much to list and a baby shot of nitrous....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Topgunz full supercharger kits!!	TopgunZ	Forced Induction	497	02-10-2020 06:23 AM
[FOR SALE] Stillen/Topgunz A2A Supercharger Partout	fork	Parts for sale (Private Classifieds)	18	12-04-2019 07:52 AM
[WTB] Supercharger kit Stillen, TopGunz, etc	NismoJohnG	Parts for sale (Private Classifieds)	5	05-06-2019 10:08 AM
Topgunz a2a and full supercharger cyber sale!	TopgunZ	Drivetrain/Engine	0	11-26-2018 01:38 PM
[FOR SALE] Topgunz a2a and full supercharger sale!	TopgunZ	Parts for sale (Private Classifieds)	0	11-26-2018 01:37 PM