Announcing TopgunZ ACE Supercharger Kit!

TopgunZ · 12-12-2019, 09:48 PM

Quote:

Originally Posted by redondoaveb

Good numbers. 9lb pulley snd that's it?

Yes sir!

This is the exact same pulley setup as what I always have sold. 2.8 serp, 3.2 JS and 3.2 SC side.

The Cannon intake is breathing nicely.

No doubt we will see 600whp with E85 on the stock setup!

redondoaveb · 12-12-2019, 10:05 PM

Quote:

Originally Posted by TopgunZ

Yes sir!

This is the exact same pulley setup as what I always have sold. 2.8 serp, 3.2 JS and 3.2 SC side.

The Cannon intake is breathing nicely.

No doubt we will see 600whp with E85 on the stock setup!

Are you going to tune that car on e85?

TopgunZ · 12-12-2019, 10:48 PM

To see the video....

https://m.facebook.com/story.php?sto...00035165914070

takemorepills · 12-12-2019, 10:49 PM

Can't see FB videos, can you YT it?

Senna-F1 · 12-12-2019, 11:17 PM

Looks like there is more power to gain from this kit. How much time did you spend on the dyno? It’s obviously making more boost, even down low. But if you look at TQ at 3000 RPM, it’s down about 70 lb-ft compared to the current kit. But good news is it’s already making more than an extra pound of boost at that RPM just eyeballing it. >3 psi compared to <2 psi.

TopgunZ · 12-12-2019, 11:30 PM

Quote:

Originally Posted by Senna-F1

Looks like there is more power to gain from this kit. How much time did you spend on the dyno? It’s obviously making more boost, even down low. But if you look at TQ at 3000 RPM, it’s down about 70 lb-ft compared to the current kit. But good news is it’s already making more than an extra pound of boost at that RPM just eyeballing it. >3 psi compared to <2 psi.

Are you talking pump gas or E85? Once she tastes corn it's going to light up the torque.

Senna-F1 · 12-12-2019, 11:37 PM

I was comparing it to your original kit on pump.

Sent from my iPhone using Tapatalk

Senna-F1 · 12-12-2019, 11:46 PM

Oh wait... your new graph unfortunately uses 2 different scales for HP and TQ and it looks to be cut off on the right where TQ numbers are. So, my statements might be off, I’ll need a closer look. Normally TQ and HP cross at 5252 RPM.

It still looks like 300 HP and 300 TQ are at the same level, so my observation is still correct. Normally you’re at 270+ lb-ft at 3000 rpm.

Senna-F1 · 12-12-2019, 11:52 PM

Aaron, I had to edit my post above. I didn’t realize the scales were different. But it still looks to be down at the lower rpm range. I hope to get Eugene to remote dyno tune as well, so I’m very interested in how well that went. Probably not the easiest thing to do.

redondoaveb · 12-13-2019, 12:06 AM

Quote:

Originally Posted by Senna-F1

I was comparing it to your original kit on pump.

Sent from my iPhone using Tapatalk

That graph is from my car, that was e85 and 91 octane.

TopgunZ · 12-13-2019, 12:12 AM

Yeah we will revisit this and tweak it in once we can get a tank of good E85 in her. They run the crappy winter blend up here this time of year.

There will be a few guys with numbers before we get the good stuff though.

TopgunZ · 12-13-2019, 12:18 AM

We are only 15whp and 30wtq off from those E85 numbers on pump gas. It will make that up by just the cooling properties of the ethanol alone. Throw some timing at it and it's going to dominate.

redondoaveb · 12-13-2019, 12:26 AM

Quote:

Originally Posted by TopgunZ

We are only 15whp and 30wtq off from those E85 numbers on pump gas. It will make that up by just the cooling properties of the ethanol alone. Throw some timing at it and it's going to dominate.

Need to see those e85 numbers

bcfromfl · 12-13-2019, 07:27 AM

Any ideas yet for a timeline when these kits will be available? Still sourcing part fabrication?

nic370 · 12-13-2019, 10:49 AM

Awsome work man
When you get chance to pick up your email
I have more news on uk sales

Sent from my SM-G960F using Tapatalk

12-12-2019, 10:48 PM	#108 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	To see the video.... https://m.facebook.com/story.php?sto...00035165914070 __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

12-12-2019, 11:17 PM	#110 (permalink)
Senna-F1 Enthusiast Member Join Date: Jun 2016 Location: Cary, NC Age: 54 Posts: 425 Drives: 370SC,EliseSC,MR2T Rep Power: 50	Looks like there is more power to gain from this kit. How much time did you spend on the dyno? It’s obviously making more boost, even down low. But if you look at TQ at 3000 RPM, it’s down about 70 lb-ft compared to the current kit. But good news is it’s already making more than an extra pound of boost at that RPM just eyeballing it. >3 psi compared to <2 psi. Last edited by Senna-F1; 12-12-2019 at 11:20 PM.

12-12-2019, 11:37 PM	#112 (permalink)
Senna-F1 Enthusiast Member Join Date: Jun 2016 Location: Cary, NC Age: 54 Posts: 425 Drives: 370SC,EliseSC,MR2T Rep Power: 50	I was comparing it to your original kit on pump. Sent from my iPhone using Tapatalk __________________ 618 WHP.452 WTQ.4" Python Intake.15 psi.e50.Topgunz SC.SOHO Tune.S1SE.STG 4 Clutch.Motordyne LTH/Test Pipes/Exhaust.485 Pump.1050x

12-12-2019, 11:46 PM	#113 (permalink)
Senna-F1 Enthusiast Member Join Date: Jun 2016 Location: Cary, NC Age: 54 Posts: 425 Drives: 370SC,EliseSC,MR2T Rep Power: 50	Oh wait... your new graph unfortunately uses 2 different scales for HP and TQ and it looks to be cut off on the right where TQ numbers are. So, my statements might be off, I’ll need a closer look. Normally TQ and HP cross at 5252 RPM. It still looks like 300 HP and 300 TQ are at the same level, so my observation is still correct. Normally you’re at 270+ lb-ft at 3000 rpm. Last edited by Senna-F1; 12-12-2019 at 11:49 PM.

12-13-2019, 12:12 AM	#116 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Yeah we will revisit this and tweak it in once we can get a tank of good E85 in her. They run the crappy winter blend up here this time of year. There will be a few guys with numbers before we get the good stuff though. redondoaveb likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

12-12-2019, 10:49 PM	#109 (permalink)
takemorepills Base Member Join Date: Apr 2019 Location: Seattle, WA Posts: 196 Drives: Q60 3.7 AWD Rep Power: 6716	Can't see FB videos, can you YT it?

12-12-2019, 11:52 PM	#114 (permalink)
Senna-F1 Enthusiast Member Join Date: Jun 2016 Location: Cary, NC Age: 54 Posts: 425 Drives: 370SC,EliseSC,MR2T Rep Power: 50	Aaron, I had to edit my post above. I didn’t realize the scales were different. But it still looks to be down at the lower rpm range. I hope to get Eugene to remote dyno tune as well, so I’m very interested in how well that went. Probably not the easiest thing to do.

12-13-2019, 12:18 AM	#117 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	We are only 15whp and 30wtq off from those E85 numbers on pump gas. It will make that up by just the cooling properties of the ethanol alone. Throw some timing at it and it's going to dominate. redondoaveb likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

12-13-2019, 07:27 AM	#119 (permalink)
bcfromfl Enthusiast Member Join Date: Nov 2016 Location: Youngstown, FL Posts: 256 Drives: 2015 PW Nismo 6MT Rep Power: 9	Any ideas yet for a timeline when these kits will be available? Still sourcing part fabrication? __________________ Michelin PS4S 275/35F, 305/30R /// Exhaust: Motordyne ART Pipes, Garageline X and Mid-Pipe Combo /// Clutch: ZSpeed EZ-Street Stage II, RJM HD Master Cylinder

12-13-2019, 10:49 AM	#120 (permalink)
nic370 Base Member Join Date: Apr 2015 Location: uk Posts: 187 Drives: 370 Rep Power: 10	Awsome work man When you get chance to pick up your email I have more news on uk sales Sent from my SM-G960F using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Topgunz full supercharger kits!!	TopgunZ	Forced Induction	497	02-10-2020 06:23 AM
[FOR SALE] Stillen/Topgunz A2A Supercharger Partout	fork	Parts for sale (Private Classifieds)	18	12-04-2019 07:52 AM
[WTB] Supercharger kit Stillen, TopGunz, etc	NismoJohnG	Parts for sale (Private Classifieds)	5	05-06-2019 10:08 AM
Topgunz a2a and full supercharger cyber sale!	TopgunZ	Drivetrain/Engine	0	11-26-2018 01:38 PM
[FOR SALE] Topgunz a2a and full supercharger sale!	TopgunZ	Parts for sale (Private Classifieds)	0	11-26-2018 01:37 PM