Announcing TopgunZ ACE Supercharger Kit!

redondoaveb · 07-25-2021, 09:55 PM

Quote:

Originally Posted by JVerge5363

I agree with being amazed by how much belt slip I'm getting. I have followed your build for quite some time and gave me the confidence with this kit. I'll be following your next build as well

I appreciate you following my build and with it helping you with your build. I almost wonder if your OEM tensioner might be maxed out due to the belt being too tight and isn't taking up the slack anymore or if the tensioner got damaged for the same reason. Before I switched over to Topgunz's tensioner pulley, I was using another fabricators set up which ended up damaging 2 idler pulleys and my OEM tensioner due to my tensioner being maxed out.

TopgunZ · 07-26-2021, 08:58 AM

I never sent any RPM belts with the ACE kit. I do however send them with the Rotrex. Turns out the RPM belts actually have a big variance in length over the standard belts, even if they have the same number/length. On the Rotrex kits the RPM belt on the supercharger will have a ton of clearance and can be placed on without even touching a pulley. The regular 10 rib belt needs to be rolled on and is a challenge. Theres like over an inch of difference.

If you run the setup I sent with the ACE kit then the idler should be on the bottom with the K071065.

If your shop changed that and moved the idler to the top then your belt should be the K071045

I am unsure what size your silver pulley is. I am guessing they also changed this and thats why your boost is so low. The ACE kit will consistently make 14-15psi with the setup I send. You should go measure that pulley.

JVerge5363 · 07-26-2021, 05:34 PM

Quote:

Originally Posted by TopgunZ

I never sent any RPM belts with the ACE kit. I do however send them with the Rotrex. Turns out the RPM belts actually have a big variance in length over the standard belts, even if they have the same number/length. On the Rotrex kits the RPM belt on the supercharger will have a ton of clearance and can be placed on without even touching a pulley. The regular 10 rib belt needs to be rolled on and is a challenge. Theres like over an inch of difference.

If you run the setup I sent with the ACE kit then the idler should be on the bottom with the K071065.

If your shop changed that and moved the idler to the top then your belt should be the K071045

I am unsure what size your silver pulley is. I am guessing they also changed this and thats why your boost is so low. The ACE kit will consistently make 14-15psi with the setup I send. You should go measure that pulley.

So I measured across the face of the silver pulley and it appears to be 2.75 in. in diameter. I also noticed that in the install instructions there seems to be a silver pulley as you can see in the pic and in the pic later in the instructions it shows a black pulley. Not sure if you switched pulleys at some point during an upgrade of this kit. I'm wondering if my OEM tensioner pulley needs to be replaced but I also see that Redondoaveb had mentioned that you may have a different tensioner pulley available?

JVerge5363 · 07-26-2021, 05:36 PM

Quote:

Originally Posted by TopgunZ

I never sent any RPM belts with the ACE kit. I do however send them with the Rotrex. Turns out the RPM belts actually have a big variance in length over the standard belts, even if they have the same number/length. On the Rotrex kits the RPM belt on the supercharger will have a ton of clearance and can be placed on without even touching a pulley. The regular 10 rib belt needs to be rolled on and is a challenge. Theres like over an inch of difference.

If you run the setup I sent with the ACE kit then the idler should be on the bottom with the K071065.

If your shop changed that and moved the idler to the top then your belt should be the K071045

I am unsure what size your silver pulley is. I am guessing they also changed this and thats why your boost is so low. The ACE kit will consistently make 14-15psi with the setup I send. You should go measure that pulley.

I also plan on getting the K071065 belt and put the idler back to the bottom position.

redondoaveb · 07-26-2021, 06:00 PM

Quote:

Originally Posted by JVerge5363

So I measured across the face of the silver pulley and it appears to be 2.75 in. in diameter. I also noticed that in the install instructions there seems to be a silver pulley as you can see in the pic and in the pic later in the instructions it shows a black pulley. Not sure if you switched pulleys at some point during an upgrade of this kit. I'm wondering if my OEM tensioner pulley needs to be replaced but I also see that Redondoaveb had mentioned that you may have a different tensioner pulley available?

Topgunz doesn't have a different tensioner pulley available that I'm aware of. I did mention the OEM tensioner. Not sure if that's where you might have mistaken it as me saying a different tensioner pulley. The silver pulley should be a 2.87", that's the 9lb pulley. 2.75" I believe would be a 10lb (Aaron can verify that). I assume his kit was shipped with the 9lb (2.87).

JVerge5363 · 07-26-2021, 08:35 PM

Quote:

Originally Posted by redondoaveb

Topgunz doesn't have a different tensioner pulley available that I'm aware of. I did mention the OEM tensioner. Not sure if that's where you might have mistaken it as me saying a different tensioner pulley. The silver pulley should be a 2.87", that's the 9lb pulley. 2.75" I believe would be a 10lb (Aaron can verify that). I assume his kit was shipped with the 9lb (2.87).

I just measured the pulley again with a digital micrometer and it is 2.74". I'm beginning to believe that the kit may have come with the wrong pulley. I did order a new Oem tensioner as well.

redondoaveb · 07-26-2021, 09:01 PM

Quote:

Originally Posted by JVerge5363

I just measured the pulley again with a digital micrometer and it is 2.74". I'm beginning to believe that the kit may have come with the wrong pulley. I did order a new Oem tensioner as well.

That's interesting. Maybe they came with the 10lb pulley. What belt # is on there?

redondoaveb · 07-26-2021, 09:08 PM

I would install the correct pulley on there also
https://conceptzperformance.com/stil...13_p_19055.php

TopgunZ · 07-26-2021, 09:47 PM

There's a chance the incorrect pulley got put on and I never caught it. When those ace kits went on sale it was a tidal wave.

Let's get you figured out bud. I'll send you a "9psi" pulley that comes with the kits that are 2.85". I'll also send you a new K071065 belt. All on me. Just move that pulley back down to that position on the bottom.

PM or call me and I'll explain how to remove it easily so you don't have to take it to a shop.

JVerge5363 · 07-26-2021, 09:50 PM

Quote:

Originally Posted by redondoaveb

That's interesting. Maybe they came with the 10lb pulley. What belt # is on there?

Not sure what belt is on there now. Couldn't get it to stop in a place that I can see the numbers. I guess I'll find out when I take it off. What I do know is that the idler pulley was in the correct spot, with the correct belt upon the initial installation. When I brought it back in for the first 2500 mile service I was noticing boost loss. At that time, they (RT Tuning) said the belt was slipping and changed out the belt. At that same time, they must have had to move the idler pulley in order to install the new belt. I'm gonna reach out to RT Tuning tomorrow to verify.

JVerge5363 · 07-26-2021, 09:54 PM

Quote:

Originally Posted by TopgunZ

There's a chance the incorrect pulley got put on and I never caught it. When those ace kits went on sale it was a tidal wave.

Let's get you figured out bud. I'll send you a "9psi" pulley that comes with the kits that are 2.85". I'll also send you a new K071065 belt. All on me. Just move that pulley back down to that position on the bottom.

PM or call me and I'll explain how to remove it easily so you don't have to take it to a shop.

Thank you for your assistance! I'll reach out to you tomorrow.

TopgunZ · 07-26-2021, 09:56 PM

I'm guessing they only had the K071045 in stock and knew they could move that pulley up to make it work. That's the belt that comes with the stillen kit so I'm sure they had some on hand but the K071065 is selective to the ACE kit and Rotrex.

redondoaveb · 07-26-2021, 10:12 PM

Quote:

Originally Posted by TopgunZ

I'm guessing they only had the K071045 in stock and knew they could move that pulley up to make it work. That's the belt that comes with the stillen kit so I'm sure they had some on hand but the K071065 is selective to the ACE kit and Rotrex.

Certainly nothing wrong with the K071045 belt and the pulley in the upper position as long as the 9lb pulley is installed. That was my set up and I never had any belt slip on the serpentine side.

DrBacon · 08-02-2021, 07:31 PM

Just a heads up: The Gates K080220RPM belts are getting hard to come by, every single "proper" distributor is out of stock and the only place to get them is a couple sellers on ebay. I bought a couple to hopefully hold me over until a new batch can be produced and everything is restocked.

redondoaveb · 08-02-2021, 07:42 PM

Quote:

Originally Posted by DrBacon

Just a heads up: The Gates K080220RPM belts are getting hard to come by, every single "proper" distributor is out of stock and the only place to get them is a couple sellers on ebay. I bought a couple to hopefully hold me over until a new batch can be produced and everything is restocked.

I always kept a couple spares for that same reason

07-26-2021, 08:58 AM	#527 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I never sent any RPM belts with the ACE kit. I do however send them with the Rotrex. Turns out the RPM belts actually have a big variance in length over the standard belts, even if they have the same number/length. On the Rotrex kits the RPM belt on the supercharger will have a ton of clearance and can be placed on without even touching a pulley. The regular 10 rib belt needs to be rolled on and is a challenge. Theres like over an inch of difference. If you run the setup I sent with the ACE kit then the idler should be on the bottom with the K071065. If your shop changed that and moved the idler to the top then your belt should be the K071045 I am unsure what size your silver pulley is. I am guessing they also changed this and thats why your boost is so low. The ACE kit will consistently make 14-15psi with the setup I send. You should go measure that pulley. JVerge5363 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

07-26-2021, 09:08 PM	#533 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,366 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	I would install the correct pulley on there also https://conceptzperformance.com/stil...13_p_19055.php JVerge5363 likes this. __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

07-26-2021, 09:47 PM	#534 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	There's a chance the incorrect pulley got put on and I never caught it. When those ace kits went on sale it was a tidal wave. Let's get you figured out bud. I'll send you a "9psi" pulley that comes with the kits that are 2.85". I'll also send you a new K071065 belt. All on me. Just move that pulley back down to that position on the bottom. PM or call me and I'll explain how to remove it easily so you don't have to take it to a shop. JVerge5363 and redondoaveb like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

07-26-2021, 09:56 PM	#537 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	I'm guessing they only had the K071045 in stock and knew they could move that pulley up to make it work. That's the belt that comes with the stillen kit so I'm sure they had some on hand but the K071065 is selective to the ACE kit and Rotrex. JVerge5363 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

08-02-2021, 07:31 PM	#539 (permalink)
DrBacon Enthusiast Member Join Date: Nov 2016 Location: Washington Posts: 285 Drives: 2014 Nismo Rep Power: 27365	Just a heads up: The Gates K080220RPM belts are getting hard to come by, every single "proper" distributor is out of stock and the only place to get them is a couple sellers on ebay. I bought a couple to hopefully hold me over until a new batch can be produced and everything is restocked. Rusty and redondoaveb like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Topgunz full supercharger kits!!	TopgunZ	Forced Induction	497	02-10-2020 06:23 AM
[FOR SALE] Stillen/Topgunz A2A Supercharger Partout	fork	Parts for sale (Private Classifieds)	18	12-04-2019 07:52 AM
[WTB] Supercharger kit Stillen, TopGunz, etc	NismoJohnG	Parts for sale (Private Classifieds)	5	05-06-2019 10:08 AM
Topgunz a2a and full supercharger cyber sale!	TopgunZ	Drivetrain/Engine	0	11-26-2018 01:38 PM
[FOR SALE] Topgunz a2a and full supercharger sale!	TopgunZ	Parts for sale (Private Classifieds)	0	11-26-2018 01:37 PM