Nissan 370Z Forum
Page 13 of 40 « First 31112 13 141523 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Announcing TopgunZ ACE Supercharger Kit! (http://www.the370z.com/forced-induction/132393-announcing-topgunz-ace-supercharger-kit.html)

TopgunZ 02-18-2020 07:33 PM
Quote:
Originally Posted by NorthStyle (Post 3909393)
So you're going the Turbo-Guard route? ...or am I missing something?
The intake will be fully filtered air. The filter can be removed for cleaning WITHOUT removing the supercharger or bumper. 2 minute job. The intake needs one screw to be fully removed so no need to take out the supercharger at all if you choose to run a turbo guard. The kit will have a ton of options. One is choosing to just run a turbo guard since everyone on Facebook feels the gains outweigh the risk. This will be a cheaper option as turbo guards are only $70.

Other options to be released soon.

DUSHER 02-18-2020 07:39 PM
Quote:
Originally Posted by TopgunZ (Post 3909356)
Update...

3 kits have shipped except for the piping.

Piping is in production in full swing and it will be shipping next week.

Here is a pic of the new intake mesh. The cannon intake is obsolete compared to this.

http://www.the370z.com/members/topgu...attach0-13.jpg

http://www.the370z.com/members/topgu...103961-hex.png

Is my kit hiding in there :D ?

KaienZ34 02-18-2020 07:53 PM
sub'ed

NorthStyle 02-18-2020 08:47 PM
Quote:
Originally Posted by TopgunZ (Post 3909398)
The intake will be fully filtered air. The filter can be removed for cleaning WITHOUT removing the supercharger or bumper. 2 minute job. The intake needs one screw to be fully removed so no need to take out the supercharger at all if you choose to run a turbo guard. The kit will have a ton of options. One is choosing to just run a turbo guard since everyone on Facebook feels the gains outweigh the risk. This will be a cheaper option as turbo guards are only $70.

Other options to be released soon.
Thanks for clarifying

BOLIO 671 02-19-2020 05:59 AM
Congrats Topz on the production moving forward....

Will this new intake design be applicable to ur 1st Edition Kit?

wideglideleon 02-19-2020 06:04 AM
Let's hope so!!!

nic370 02-19-2020 06:07 AM
Quote:
Originally Posted by BOLIO 671 (Post 3909479)
Congrats Topz on the production moving forward....

Will this new intake design be applicable to ur 1st Edition Kit?
I believe it will

Sent from my SM-G960F using Tapatalk

TopgunZ 02-19-2020 08:47 AM
Yes, the removable intake will be a drop in for Gen 1.

You could get real lazy and hack saw off the K&N filter so you dont have to remove the supercharger.

takemorepills 02-19-2020 10:08 AM
Can we get a picture of the cast intake elbow installed in a car, with a filter on it?

cgr406 02-19-2020 12:59 PM
Quote:
Originally Posted by TopgunZ (Post 3909503)
Yes, the removable intake will be a drop in for Gen 1.

You could get real lazy and hack saw off the K&N filter so you dont have to remove the supercharger.
Haha. That's what I did! It slips right out.

Sent from my Pixel 3 using Tapatalk

Spooler 02-19-2020 01:19 PM
Quote:
Originally Posted by TopgunZ (Post 3909398)
One is choosing to just run a turbo guard since everyone on Facebook feels the gains outweigh the risk. This will be a cheaper option as turbo guards are only $70.

Other options to be released soon.
LMAO, you know those MyFace folks aren't too smart.

Ultrakla$$ic 02-19-2020 03:51 PM



https://i.imgur.com/fbBVNEbm.jpg:p

TopgunZ 02-19-2020 04:17 PM
Lol. Not the update you were hoping for? :rolleyes:

TopgunZ 02-19-2020 04:29 PM
Quote:
Originally Posted by takemorepills (Post 3909535)
Can we get a picture of the cast intake elbow installed in a car, with a filter on it?
http://www.the370z.com/members/topgu...attach0-14.jpg

Here you go.

Ultrakla$$ic 02-19-2020 04:48 PM
Quote:
Originally Posted by TopgunZ (Post 3909599)
Lol. Not the update you were hoping for? :rolleyes:
DO WANT!!!!!:tup: So 550-600rwhp is easily attainable with the right supporting fuel mods?? [albeit I'll have a free flowing exhaust as well]


All times are GMT -5. The time now is 01:05 PM.
Page 13 of 40 « First 31112 13 141523 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2