Another Supercharger Build in the Works

V8Killer · 04-28-2020, 06:59 PM

Sent from my iPhone using Tapatalk

Elmo370z · 04-28-2020, 07:26 PM

Putting all that money into a build like this, you should really considered dumping that pulley and switching to a ati damper.

V8Killer · 04-29-2020, 02:02 PM

Sent from my iPhone using Tapatalk

TopgunZ · 04-29-2020, 02:21 PM

Wow they are putting in work!

Wuero370z · 04-29-2020, 02:34 PM

Quote:

Originally Posted by Rusty

On your oil gallery screws. To keep them from backing out. At the edge of the screw. Place a center punch there and hit it with a hammer. It doesn't have to be a hard hit. But you want to leave a nice punch mark tho. This is an old mechanic's trick. When I worked for Elliott. We did this all the time. Some screws got 3 punch marks on them.

Would you mind describing how that works? What exactly is the small gouge doing?

Sent from my iPhone using Tapatalk

takemorepills · 04-29-2020, 07:34 PM

Love those pics, I can clearly see the challenge of the SC intake up against the core support.

V8Killer · 05-13-2020, 09:11 PM

Hoping tomorrow is the day. The wiring for the fuel pump showed up today so no tuning was done.

Sent from my iPhone using Tapatalk

DrBacon · 06-03-2020, 02:20 PM

What brand reflective tape is that? I've been wanting to do the same, mainly because I may have scratched up the Y pipe (older kit) on the install and I'm a bit ashamed, wanting something to hide that with.

V8Killer · 06-04-2020, 01:37 PM

Quote:

Originally Posted by DrBacon

What brand reflective tape is that? I've been wanting to do the same, mainly because I may have scratched up the Y pipe (older kit) on the install and I'm a bit ashamed, wanting something to hide that with.

To be honest I am not sure since I purchased that stuff so long ago and was going to use it to wrap my intakes but never got around to it. Go for it on the wrapping, just don't get sucked into the debate of whether it works or not.

JARblue · 06-04-2020, 02:43 PM

Quote:

Originally Posted by Wuero370z

Would you mind describing how that works? What exactly is the small gouge doing?

The stock screws are prone to backing out on their own. The indention from the punch helps prevent the screw from backing out.

Rusty · 06-04-2020, 04:54 PM

Quote:

Originally Posted by JARblue

The stock screws are prone to backing out on their own. The indention from the punch helps prevent the screw from backing out.

That's an old mechanic trick.

ZontheRocks · 06-22-2020, 08:55 AM

Any updates during the last month?

V8Killer · 06-23-2020, 07:39 AM

Quote:

Originally Posted by ZontheRocks

Any updates during the last month?

Ya I ran into multiple small issues, o2 sensors being bad, running rich etc. Saturday they believe one of the fuel pumps were shutting off intermittently during tuning. I do have numbers for the 93 pump on a mustang dyno but I am waiting for the other fuel numbers to be released as well as running it on a dynojet since that is what most people use. I am supposed to get the car today but we will see, if I do I have a dynojet appointment tomorrow and all sheets will be posted.

V8Killer · 06-25-2020, 11:29 AM

bump

TopgunZ · 06-25-2020, 11:44 AM

Quote:

Originally Posted by V8Killer

bump

And by bump he means "go back and look at the initial post on Page 1"..lol.

Ill make it easier.. 647WHP on a Mustang Dyno!

Its pretty common to see 5-10% lower readings on a Mustang Dyno with some people saying even as much as 15%.

We wont really know until he gets on the industry standard DynoJet. But even if the correction is 0%...This is a ton of power!

04-28-2020, 06:59 PM	#16 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Sent from my iPhone using Tapatalk BOLIO 671, redondoaveb, "Z"en and 1 others like this. __________________ "Punch" Too much to list and a baby shot of nitrous....

04-28-2020, 07:26 PM	#17 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Putting all that money into a build like this, you should really considered dumping that pulley and switching to a ati damper. Rusty, wideglideleon and rovert like this.

04-29-2020, 02:02 PM	#18 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Sent from my iPhone using Tapatalk JARblue, TBatt, wideglideleon and 5 others like this. __________________ "Punch" Too much to list and a baby shot of nitrous....

04-29-2020, 02:21 PM	#19 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	Wow they are putting in work! V8Killer, wideglideleon and redondoaveb like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-29-2020, 07:34 PM	#21 (permalink)
takemorepills Base Member Join Date: Apr 2019 Location: Seattle, WA Posts: 196 Drives: Q60 3.7 AWD Rep Power: 6716	Love those pics, I can clearly see the challenge of the SC intake up against the core support. "Z"en likes this.

05-13-2020, 09:11 PM	#22 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	Hoping tomorrow is the day. The wiring for the fuel pump showed up today so no tuning was done. Sent from my iPhone using Tapatalk Rusty, Elmo370z, redondoaveb and 2 others like this. __________________ "Punch" Too much to list and a baby shot of nitrous....

06-03-2020, 02:20 PM	#23 (permalink)
DrBacon Enthusiast Member Join Date: Nov 2016 Location: Washington Posts: 285 Drives: 2014 Nismo Rep Power: 27365	What brand reflective tape is that? I've been wanting to do the same, mainly because I may have scratched up the Y pipe (older kit) on the install and I'm a bit ashamed, wanting something to hide that with.

06-22-2020, 08:55 AM	#27 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 957 Drives: 2016 Nissan PW 370Z Rep Power: 34535	Any updates during the last month? __________________ '16 Pearl White Sport \| Stillen Gen. 3 \| Motordyne ART \| Motordyne Shockwave \| ZSpeed \| Powertrix \| EVO-R \| Aeroworkz \| Nismo \| Z1 \| EcuTek \| Tuned by Seb @ SpecialtyZ

06-25-2020, 11:29 AM	#29 (permalink)
V8Killer A True Z Fanatic Join Date: Feb 2011 Location: Newport, NC Posts: 1,127 Drives: It Hard Till It Pops Rep Power: 16	bump __________________ "Punch" Too much to list and a baby shot of nitrous....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Build Thread] -- Journey to 700+ WHP [Supercharger]	cupcakez	Forced Induction	699	07-30-2021 10:47 PM
New Stillen supercharger build Australia - any advice welcomed please contribute	kz370z	Forced Induction	10	06-28-2017 10:29 AM
GTM Stage 1.5 supercharger build	snowsurfdirtx	Forced Induction	197	05-07-2017 07:04 AM
Fillerbunnie's GTM Stage 1 Supercharger build (Australian RHD)	fillerbunnie	Forced Induction	46	08-23-2015 02:07 AM
40th Stillen Supercharger Build	Nism0	Forced Induction	51	03-23-2015 09:12 PM