![]() |
Most injectors run a 12V source hot (key on) all the time. The ECU grounds the other pin to fire the injector. It sounds like you have a hard short
|
|
LinkBack | Thread Tools | Display Modes |
![]() |
#11 (permalink) |
Track Member
Join Date: Nov 2009
Location: Oklahoma
Posts: 530
Drives: 2015 GT-R PW Premium
Rep Power: 17 ![]() |
![]()
Most injectors run a 12V source hot (key on) all the time. The ECU grounds the other pin to fire the injector. It sounds like you have a hard short to ground in the harness or an injector. Start by disconnecting the injector harness and see if it still blows the fuse. Divide and conquer.
(Typical injector impedance is 10-12 Ohms, so they should pull about 1 Amp if they are working properly.) |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Stillen Supercharger Kit Installation cost? | Chemicool | Forced Induction | 24 | 07-29-2018 02:28 PM |
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation. | SAM@GTM | Forced Induction | 311 | 09-07-2011 03:42 AM |
FSP: Stillen Supercharger Installation | Chris@FsP | Forced Induction | 54 | 09-02-2010 07:29 PM |
Supercharger Installation Manuals | GUTCH | Forced Induction | 15 | 08-06-2010 03:34 AM |