Car doesn't start after supercharger installation

kinitox · 10-03-2019, 04:06 AM

My best recommendation is wait until tomorrow and call seb, he will help for sure. Did you check the wiring from/to ECU? Did you check if we'll conected to the BCM? (That one below the globe pocket in passenger side) or verify if air bag module it's right conected? Keep in mind you have to removed several parts of the interior to reach fuel pump and make all changes and maybe just maybe you touch the car wiring and disconnect something or broke any wire.

In my case to access and make a clear fuel pump work me removed the seats and part of the interior, disconnect baterry and check all wires touched before and after installation to be sure we are doing right with a probe.

If there is no fuse or wire damage the it's maybe something it's not plugged right.

Enviado desde mi CLT-L29 mediante Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Supercharger Kit Installation cost?	Chemicool	Forced Induction	24	07-29-2018 02:28 PM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Installation.	SAM@GTM	Forced Induction	311	09-07-2011 03:42 AM
FSP: Stillen Supercharger Installation	Chris@FsP	Forced Induction	54	09-02-2010 07:29 PM
Supercharger Installation Manuals	GUTCH	Forced Induction	15	08-06-2010 03:34 AM

10-03-2019, 04:06 AM	#6 (permalink)
kinitox Base Member Join Date: Jan 2015 Location: Dominican Republic Posts: 52 Drives: 370z Basic auto 2009 Rep Power: 11	My best recommendation is wait until tomorrow and call seb, he will help for sure. Did you check the wiring from/to ECU? Did you check if we'll conected to the BCM? (That one below the globe pocket in passenger side) or verify if air bag module it's right conected? Keep in mind you have to removed several parts of the interior to reach fuel pump and make all changes and maybe just maybe you touch the car wiring and disconnect something or broke any wire. In my case to access and make a clear fuel pump work me removed the seats and part of the interior, disconnect baterry and check all wires touched before and after installation to be sure we are doing right with a probe. If there is no fuse or wire damage the it's maybe something it's not plugged right. Enviado desde mi CLT-L29 mediante Tapatalk