MAC Boost solenoid

The Weapon · 10-03-2019, 03:26 PM

Quote:

Originally Posted by Gray Goose

I am pretty sure you want your source to be on the charged side of the throttle bodies? I will not have to "T" the source hose if I hook it as shown in the diagram. I will have to "T" the lines going to the waste gates.

I agree, everything i read about wastegates is to put them to pressure only source.

It DOES works on vacuum/boost but it wears the diaphragm prematurely. The vac/boost source where the evap connects into is also too close to the TB and not optimal placement and causes too much turbulence.

The shop that did my original install did just that and i was hitting about 10 lbs on 7lb spring. The boost felt more responsive but Seb said it was horrible placement and advised that i move it to the charge pipe to control the boost better.

He also had me drop the 5 lbs spring and said we can bring it up to 15lbs from there which i did. The original shop said they couldn't go above 10 lbs if i put the 5 lbs and refused to do it. They were complete as$ hats.

sirnixalot · 10-03-2019, 03:52 PM

Quote:

Originally Posted by The Weapon

I agree, everything i read about wastegates is to put them to pressure only source.

It DOES works on vacuum/boost but it wears the diaphragm prematurely. The vac/boost source where the evap connects into is also too close to the TB and not optimal placement and causes too much turbulence.

The shop that did my original install did just that and i was hitting about 10 lbs on 7lb spring. The boost felt more responsive but Seb said it was horrible placement and advised that i move it to the charge pipe to control the boost better.

He also had me drop the 5 lbs spring and said we can bring it up to 15lbs from there which i did. The original shop said they couldn't go above 10 lbs if i put the 5 lbs and refused to do it. They were complete as$ hats.

You learn something new every day

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ECUTEK - Connecting Flex and WG Solenoid	Girald	Tuning	4	05-01-2019 03:53 PM
[FOR SALE] [BNIB] Innovate SCG-1 boost controller/afr/ boost gauge	PongSanity	Parts for sale (Private Classifieds)	8	08-16-2017 11:01 AM
Nitrous/fuel solenoid mounting locations	madwi	Forced Induction	6	08-12-2016 08:34 PM
[FOR SALE] Innovate Motorsports SCG-1 Solenoid Boost Controller & Wideband O2 AFR Gauge Kit	EliteXpress	Parts for sale (Private Classifieds)	1	07-12-2016 11:02 PM
EBC solenoid and controller install?	FireDan50	Forced Induction	9	10-07-2014 04:49 PM