Project Nismo Turbo build

soill370z · 11-13-2019, 11:11 AM

Damn, now im scared to ffs with my car! Dang it!

Spooler · 11-13-2019, 11:19 AM

Quote:

Originally Posted by soill370z

Damn, now im scared to ffs with my car! Dang it!

Do what????? ffs?????

redondoaveb · 11-13-2019, 11:23 AM

Quote:

Originally Posted by Spooler

Do what????? ffs?????

Flat foot shifting

Gray Goose · 11-13-2019, 04:51 PM

Hey Guys, If I buy a used EBAY engine to get me going for now.....

Do I need the donor to have had a manual trans engine to match mine? (what is different?)

What else should look for?

Think I will do this while building another engine.

~

Spooler · 11-13-2019, 04:58 PM

Quote:

Originally Posted by Gray Goose

Hey Guys, If I buy a used EBAY engine to get me going for now.....

Do I need the donor to have had a manual trans engine to match mine? (what is different?)

What else should look for?

Think I will do this while building another engine.

~

I don't think so. You may have to install a pilot bushing. That's it.

redondoaveb · 11-13-2019, 05:58 PM

Here's a listing for a part out of a manual z on facebook.

redondoaveb · 11-13-2019, 06:03 PM

Here's one from their website.

Martijn_b · 11-13-2019, 06:33 PM

I would honestly think over building something above 800 horsepower. It's just... so much work. And so much of other things you need to install, and then reliability is rare. Its gonna take time.

If I were in the US (used motors are still 8k here), I'd buy a used motor, refresh bearings and just put in eagle rods and 10:1 forged pistons, perhaps some arp headstuds and a good gasket. Call it a day and just drive it on 14-15 psi ending up spending 5k ish.

Sent from my SM-G973F using Tapatalk

Spooler · 11-13-2019, 07:10 PM

Study up on how to set the VVEL sensor and disassemble it. That way you don't make any mistakes.

hustleman222 · 11-13-2019, 09:45 PM

Quote:

Originally Posted by Spooler

Study up on how to set the VVEL sensor and disassemble it. That way you don't make any mistakes.

Hit me up when you are ready to disassemble the heads.

Rusty · 11-13-2019, 10:57 PM

Got to give Spooler props on putting a 800hp engine together, and making it live.

Text book.

Spooler · 11-14-2019, 10:03 AM

Quote:

Originally Posted by Rusty

Got to give Spooler props on putting a 800hp engine together, and making it live.

Text book.

LOL, The Machine shop did it and MA-Motorsports did all the heavy lifting for me. You know I didn't. I wanted to do it but my body said other wise. So if you are saying pay a top tier shop that has done it before to do it for an excellent price, Yes I concur.

Rusty · 11-14-2019, 01:52 PM

Quote:

Originally Posted by Spooler

LOL, The Machine shop did it and MA-Motorsports did all the heavy lifting for me. You know I didn't. I wanted to do it but my body said other wise. So if you are saying pay a top tier shop that has done it before to do it for an excellent price, Yes I concur.

You did the research, put together the parts list, told them what you wanted, and wrote the check.

Spooler · 11-14-2019, 02:24 PM

Quote:

Originally Posted by Rusty

You did the research, put together the parts list, told them what you wanted, and wrote the check.

3 to 4 years of reading and researching. Yeah, I obsessed over it just a touch. Not a single 1000hp engine that were reliable has been built. A couple have been built recently, too early to tell on those.

Elmo370z · 11-14-2019, 03:12 PM

Just no one is interested in messing around or building vvel heads

11-13-2019, 06:33 PM	#188 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3786	I would honestly think over building something above 800 horsepower. It's just... so much work. And so much of other things you need to install, and then reliability is rare. Its gonna take time. If I were in the US (used motors are still 8k here), I'd buy a used motor, refresh bearings and just put in eagle rods and 10:1 forged pistons, perhaps some arp headstuds and a good gasket. Call it a day and just drive it on 14-15 psi ending up spending 5k ish. Sent from my SM-G973F using Tapatalk Elmo370z likes this. __________________ Instagram: Boosted_Fairlady Last edited by Martijn_b; 11-13-2019 at 06:36 PM.

11-13-2019, 07:10 PM	#189 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Study up on how to set the VVEL sensor and disassemble it. That way you don't make any mistakes. Rusty, hustleman222 and Gray Goose like this.

11-13-2019, 10:57 PM	#191 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,186 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Got to give Spooler props on putting a 800hp engine together, and making it live. Text book. cv129 and redondoaveb like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The build! Fast Intentions Twin Turbo 370z Nismo	1Z2NV	Forced Induction	0	10-02-2015 10:51 PM
G37S GTM Stage 2 Twin Turbo Build by Project X	Chi-City-G	Other Vehicles	27	07-02-2013 12:07 PM
2010 370Z NISMO Twin Turbo build courtesy of GTM	stormcrow	Forced Induction	273	02-16-2011 07:41 AM
my current build project.	kellyefields	New Forum Member	3	01-23-2011 09:19 PM
THE BUILD! Project 370Z	VIP-STATUS	Nissan 370Z Photos / Spyshots / Video / Media Gallery	34	09-04-2009 02:25 AM

11-13-2019, 11:11 AM	#181 (permalink)
soill370z Base Member Join Date: Mar 2015 Location: illinois Posts: 134 Drives: 13 nismo 370z Rep Power: 10	Damn, now im scared to ffs with my car! Dang it!

11-13-2019, 04:51 PM	#184 (permalink)
Gray Goose Base Member Join Date: Mar 2019 Location: LA Posts: 169 Drives: 2012 370Z Nismo #227 Rep Power: 6	Hey Guys, If I buy a used EBAY engine to get me going for now..... Do I need the donor to have had a manual trans engine to match mine? (what is different?) What else should look for? Think I will do this while building another engine. ~

11-14-2019, 03:12 PM	#195 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Just no one is interested in messing around or building vvel heads