09-30-2019, 01:34 PM
|
#11 (permalink)
|
|
A True Z Fanatic
Join Date: Mar 2009
Location: Chicago
Posts: 3,669
Drives: 370
Rep Power: 974724
|
Quote:
Originally Posted by Gray Goose
Thanks for the info C, just to make sure.... the bottom port of the regulator comes from the fuel pump, the side port on the regulator goes into the fuel rail, fuel rails connect in the front and the other fuel rail goes to the return....correct?
|
No that wont go over well. Its somewhat open for interpretation but the lengths of the hoses will only accommodate a few ways. But you do have the regulator connections setup in a non-functional manor. The side ports are pressure side, and the bottom port is the outlet.
To connect as we intend: The hose leaving the pump and then filter feeds the rear of the passenger side rail. The hose leaving the rear of the driver side rail feeds the input (side port) of regulator. The hose leaving the bottom of the regulator connects to the stock feed pipe, using this original feed pipe as the return line.
|
|
|
Similar Threads
425Likes
Threaded Mode
