Project Nismo Turbo build

madwi · 08-21-2019, 07:04 PM

Quote:

Originally Posted by Jinxx

The boosted performance kit doesnt allow clearance for the cmak..I think Sasha redesign it for that but I’m not sure if he released that version yet but you can use Zspeed HD slave cylinder as well

I run the cmak and BP kit, works fine.

madwi · 08-21-2019, 08:14 PM

Quote:

Originally Posted by Gray Goose

I plan on going with the stage 3 kit and delete on ZSpeed's site.

I might just take a look to see what I have first since I don't know what the previous owner put in the car. I was just told "aftermarket flywheel" so I'm not sure why someone would upgrade the flywheel and not the put a better than stock clutch.

I am running the South Bend Stage 3 with the Zspeed 17 or 19lb flywheel and it has a good feel to it and performs excellent.

Jinxx · 08-21-2019, 09:33 PM

Quote:

Originally Posted by madwi

I run the cmak and BP kit, works fine.

This is what I was referring to ...

Boosted Performance product update

But also my kit is from 2016 so I might not be up to date

Elmo370z · 08-21-2019, 09:34 PM

Waiting on it

TexasZ34 · 08-21-2019, 09:57 PM

A couple things I would add/change are:

Replace the Z1 solid bushing for the CJM solid bushing, you have more clearance for the piping.

Might add the Z1 poly transmission mount.

I would forget about the Koni shock and go for a set of coilovers and maybe upgraded to Swift springs for a higher spring rate. Stance, Fortune auto, BC, etc offer that option on their coilovers

If your E85 is readily available in your area, I would use it. Boosted VQ's love E.

Gray Goose · 08-26-2019, 08:57 AM

Quote:

Originally Posted by Jinxx

This is what I was referring to ...

Boosted Performance product update

But also my kit is from 2016 so I might not be up to date

I will assume my kit will be updated. Sasa should be shipping it any day now. But if it is not, I will work around it.

Thanks for the info

Gray Goose · 08-26-2019, 09:01 AM

Quote:

Originally Posted by TexasZ34

A couple things I would add/change are:

Replace the Z1 solid bushing for the CJM solid bushing, you have more clearance for the piping.

Might add the Z1 poly transmission mount.

I would forget about the Koni shock and go for a set of coilovers and maybe upgraded to Swift springs for a higher spring rate. Stance, Fortune auto, BC, etc offer that option on their coilovers

If your E85 is readily available in your area, I would use it. Boosted VQ's love E.

I already installed the Z1 bushings, and will see how it goes.

I do plan on putting the transmission mount. I just have not decided on solid or poly. Not sure how bad the noise will be with the solid.

I picked up some Tein Flex Z coilovers for a great price (brand new) they will do for now lol. I dropped the rear 1.25" and the front 1" with the coilovers. I hope that is not too much.

I wish we had E85 close!!!! but the closest station is 1.5 hours away. I will still put an E85 tune in the car and try to get some drums of E85 in my garage.

Gray Goose · 08-26-2019, 09:07 AM

Updated 8-26-2019

We installed the Z1 solid diff bushings, Z1 solid engine mounts, and the Tein coilovers this weekend.

Can't wait to go test drive it with the changes and see how she reacts!

BTW that rear subframe diff bushing is a pain in the @ss, even with the Z1 tool!!

But we got it all installed while waiting on turbo parts!!!

~

Gray Goose · 09-23-2019, 10:09 AM

We started on the turbo install this weekend but decided that powder-coating all the intake piping and inter-cooler would fit this car much better.

So I'm dropping everything off at the painter today!

Spooler · 09-23-2019, 10:57 AM

For drag racing, stay at stock ride height. Your 60ft times will be better. If you lower it, you will have traction issues due to how much negative camber is added through the suspension travel. It is even quicker, when lowered, than stock.

phunk · 09-23-2019, 10:02 PM

Id advise getting a harder transmission mount in there when running solid engine mounts. Maybe not solid because of the noise. But you want to get transmission movement reduced. The transmission and engine are an assembly, and one does not move without the other coming along. When the tail of your transmission wags around, SOMETHING up front is flexing to accommodate that. If the engine mounts are solid, we can only scratch our heads and wonder what is distorting when the tail of the trans is putting leverage on the powertrain. Nevermind that I am a big hypocrite and ran solid engine with stock trans mount for a long time.

Gray Goose · 09-24-2019, 08:35 AM

Quote:

Originally Posted by phunk

Id advise getting a harder transmission mount in there when running solid engine mounts. Maybe not solid because of the noise. But you want to get transmission movement reduced. The transmission and engine are an assembly, and one does not move without the other coming along. When the tail of your transmission wags around, SOMETHING up front is flexing to accommodate that. If the engine mounts are solid, we can only scratch our heads and wonder what is distorting when the tail of the trans is putting leverage on the powertrain. Nevermind that I am a big hypocrite and ran solid engine with stock trans mount for a long time.

I forgot to put that in my build sheet

. We did put the Z1 urethane trans mount as well

Gray Goose · 09-24-2019, 08:38 AM

Quote:

Originally Posted by Spooler

For drag racing, stay at stock ride height. Your 60ft times will be better. If you lower it, you will have traction issues due to how much negative camber is added through the suspension travel. It is even quicker, when lowered, than stock.

I purchased the Kenetics camper arms, traction arms and front upper control arms. Also the front and rear sway bar adjustable links. All coming in next week!

Gray Goose · 09-24-2019, 08:41 AM

Working on installing Phunk's S1-SE (CJM) fuel system this week while waiting on Powdercoat! fuel pump coming out tonight.

phunk · 09-24-2019, 02:56 PM

Quote:

Originally Posted by Gray Goose

Working on installing Phunk's S1-SE (CJM) fuel system this week while waiting on Powdercoat! fuel pump coming out tonight.

If you dont have the ZIP file of pictures showing the intended layout, shoot me an email to the address on the website and I will send it over.

08-21-2019, 09:57 PM	#35 (permalink)
TexasZ34 Base Member Join Date: Jun 2011 Location: Houston, Tx Posts: 78 Drives: 10 40TH 370Z KAV M6 Rep Power: 14	A couple things I would add/change are: Replace the Z1 solid bushing for the CJM solid bushing, you have more clearance for the piping. Might add the Z1 poly transmission mount. I would forget about the Koni shock and go for a set of coilovers and maybe upgraded to Swift springs for a higher spring rate. Stance, Fortune auto, BC, etc offer that option on their coilovers If your E85 is readily available in your area, I would use it. Boosted VQ's love E. __________________

09-23-2019, 10:57 AM	#40 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	For drag racing, stay at stock ride height. Your 60ft times will be better. If you lower it, you will have traction issues due to how much negative camber is added through the suspension travel. It is even quicker, when lowered, than stock. cv129 likes this.

09-23-2019, 10:02 PM	#41 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Id advise getting a harder transmission mount in there when running solid engine mounts. Maybe not solid because of the noise. But you want to get transmission movement reduced. The transmission and engine are an assembly, and one does not move without the other coming along. When the tail of your transmission wags around, SOMETHING up front is flexing to accommodate that. If the engine mounts are solid, we can only scratch our heads and wonder what is distorting when the tail of the trans is putting leverage on the powertrain. Nevermind that I am a big hypocrite and ran solid engine with stock trans mount for a long time. JARblue, Rusty, Spooler and 1 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph Last edited by phunk; 09-23-2019 at 10:05 PM.

09-24-2019, 08:41 AM	#44 (permalink)
Gray Goose Base Member Join Date: Mar 2019 Location: LA Posts: 169 Drives: 2012 370Z Nismo #227 Rep Power: 6	Working on installing Phunk's S1-SE (CJM) fuel system this week while waiting on Powdercoat! fuel pump coming out tonight. phunk, soill370z and ZontheRocks like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The build! Fast Intentions Twin Turbo 370z Nismo	1Z2NV	Forced Induction	0	10-02-2015 10:51 PM
G37S GTM Stage 2 Twin Turbo Build by Project X	Chi-City-G	Other Vehicles	27	07-02-2013 12:07 PM
2010 370Z NISMO Twin Turbo build courtesy of GTM	stormcrow	Forced Induction	273	02-16-2011 07:41 AM
my current build project.	kellyefields	New Forum Member	3	01-23-2011 09:19 PM
THE BUILD! Project 370Z	VIP-STATUS	Nissan 370Z Photos / Spyshots / Video / Media Gallery	34	09-04-2009 02:25 AM

08-21-2019, 09:34 PM	#34 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Waiting on it