[Build] 370ZTTR

husam2012 · 08-17-2019, 02:12 PM

Been slow on updates but I've been very very busy. Just came back from TX this week and this is where she's at right now.

I'm finally having the downpipes "mass" produced at a local factory, so I should have enough completed downpipes ready for everyone at the end of this week, including my car!

After that, it's just intercooler piping and it's ready for tuning.

I also had another crazy idea and proceeded with it, here's a teaser!

sirnixalot · 08-17-2019, 03:45 PM

where's the teaser

husam2012 · 08-18-2019, 03:27 AM

Forgot to include it, here it is!

Sent from my Pixel 3 using Tapatalk

TexasZ34 · 08-21-2019, 10:59 PM

Quote:

Originally Posted by husam2012

Forgot to include it, here it is!

Sent from my Pixel 3 using Tapatalk

Which subframe is this out of 350 or GTR??

Do you have anymore pictures on how you routed the coolant lines??

husam2012 · 09-18-2019, 05:25 PM

I've been super busy so I apologize for the lack of updates.

It took a while but shes finally done! I still have to finish the diff (I installed the wrong stub axles) and also redo the exhaust as the fabricator made it hang too low.

So far everything it good, with just oil cooling issues on the track. I need to figure out a way to have good flow to all the coolers

For anybody else who's doing the OS Giken LSD on a VLSD car, you can either use 2 left side stub axles, or you can use the open differential (base) stub axles but you have to machine the snap ring holes to be deeper. Hope this helps someone.

husam2012 · 09-18-2019, 05:56 PM

Quote:

Originally Posted by TexasZ34

Which subframe is this out of 350 or GTR??

Do you have anymore pictures on how you routed the coolant lines??

350Z subframe! It's kinda involved but it shaves approx 30 lbs. Along with a rear relocated battery, it should be a worthwhile mod for track/autox people.

husam2012 · 09-26-2019, 10:20 PM

As to be expected, my 2nd day driving the car and this happens!

Never had this happen before and I wasn't even beating on the car that much. Shifted from 2nd to 3rd and boom.. Defective?

Rusty · 09-26-2019, 11:09 PM

You broke the diff cover where the rear stud is mounted. All the ones I heard about. They all was beating on the car.

NeverBoneStck · 09-26-2019, 11:21 PM

What is up with Z1 Diff covers breaking. You are not the first. I am boosted and my nismo cover is fine. I beat my car as well

Spooler · 09-27-2019, 12:00 AM

Quote:

Originally Posted by NeverBoneStck

What is up with Z1 Diff covers breaking. You are not the first. I am boosted and my nismo cover is fine. I beat my car as well

Nismo diff covers have been broken also. The solution is the Bellworks diff brace. If you have a Fast Intentions exhaust you will need to modify the brace. Rusty has a write up on what to do with pictures. A little bit of wheel hop will kill'em.

NeverBoneStck · 09-27-2019, 01:55 AM

I have to bell works diff brace. The nismo cover does need to be modified for it to fit.

hrtbrknprince · 10-31-2019, 07:35 PM

Hey there I saw in another thread to search for your build thread as you spent 3800$ using GTR turbos.. I assume this is it?

husam2012 · 11-27-2019, 07:15 PM

Quote:

Originally Posted by hrtbrknprince

Hey there I saw in another thread to search for your build thread as you spent 3800$ using GTR turbos.. I assume this is it?

That price was when I had used the stock turbos. This build uses upgraded turbos which doubled the cost but almost doubled the power potential too.

I apologize for the lack of updates, I have been building a few cars using these kits so my car has been on pause for the past few months. I'm hoping to get a new intercooler from CJM next month and see what she will do on the dyno

As for everyone looking for updates on these kits, check out my website! I have a blog section there where I'll be posting all the projects that I am currently working on.

husam2012 · 01-04-2020, 07:16 PM

It's been uneventful lately as I've been working on other projects, but finally finished the tablet on my Nismo!

Also, picked this nice car up a week ago :P

Rusty · 01-04-2020, 07:30 PM

You bought what's his names Z with phunk's intake.

08-17-2019, 02:12 PM	#16 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	Been slow on updates but I've been very very busy. Just came back from TX this week and this is where she's at right now. I'm finally having the downpipes "mass" produced at a local factory, so I should have enough completed downpipes ready for everyone at the end of this week, including my car! After that, it's just intercooler piping and it's ready for tuning. I also had another crazy idea and proceeded with it, here's a teaser! Rusty, jchammond, wideglideleon and 5 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

08-17-2019, 03:45 PM	#17 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57454	where's the teaser husam2012 and ZontheRocks like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

08-18-2019, 03:27 AM	#18 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	Forgot to include it, here it is! Sent from my Pixel 3 using Tapatalk TexasZ34 and sirnixalot like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

09-18-2019, 05:25 PM	#20 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	I've been super busy so I apologize for the lack of updates. It took a while but shes finally done! I still have to finish the diff (I installed the wrong stub axles) and also redo the exhaust as the fabricator made it hang too low. So far everything it good, with just oil cooling issues on the track. I need to figure out a way to have good flow to all the coolers For anybody else who's doing the OS Giken LSD on a VLSD car, you can either use 2 left side stub axles, or you can use the open differential (base) stub axles but you have to machine the snap ring holes to be deeper. Hope this helps someone. TexasZ34, Jayhovah, James10694 and 7 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

09-26-2019, 10:20 PM	#22 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	As to be expected, my 2nd day driving the car and this happens! Never had this happen before and I wasn't even beating on the car that much. Shifted from 2nd to 3rd and boom.. Defective? __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

09-26-2019, 11:09 PM	#23 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,185 Drives: 2011 Nismo GM 6M Rep Power: 2684437	You broke the diff cover where the rear stud is mounted. All the ones I heard about. They all was beating on the car. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

09-26-2019, 11:21 PM	#24 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	What is up with Z1 Diff covers breaking. You are not the first. I am boosted and my nismo cover is fine. I beat my car as well __________________ Juiced! That is all you need to know !!

09-27-2019, 01:55 AM	#26 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 18	I have to bell works diff brace. The nismo cover does need to be modified for it to fit. __________________ Juiced! That is all you need to know !!

10-31-2019, 07:35 PM	#27 (permalink)
hrtbrknprince Base Member Join Date: Feb 2012 Location: Savannah Posts: 113 Drives: 14 MBMM6S Rep Power: 3368	Hey there I saw in another thread to search for your build thread as you spent 3800$ using GTR turbos.. I assume this is it? husam2012 likes this.

01-04-2020, 07:16 PM	#29 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 549 Drives: 370Z Nismo Rep Power: 9469	It's been uneventful lately as I've been working on other projects, but finally finished the tablet on my Nismo! Also, picked this nice car up a week ago :P cv129, ByThaBay, Rusty and 4 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

01-04-2020, 07:30 PM	#30 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,185 Drives: 2011 Nismo GM 6M Rep Power: 2684437	You bought what's his names Z with phunk's intake. cv129, Hotrodz, Spooler and 2 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The RWB JK build	edzilla123	Member's 370Z Gallery	131	02-16-2020 05:43 PM
7at 4.08 build	Taylortoons	Member's 370Z Gallery	19	03-01-2017 09:44 PM
Which HFC for a TT or SC Build	swiss370Z	Forced Induction	21	09-11-2012 09:10 AM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 06:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 01:40 AM