Any boosted High hp high mileage vqs out there?

Chrisc3 · 03-25-2019, 12:16 PM

Am looking at building the z 800whp+ and was wondering how the vq platform is holding up. I know a few guys hit the 1000hp milestones, butt how do these cars perform off the dyno. Other than a dyno graph, Can these cars be driven? 1/4 times? drivability? Reliability? or would a swap would be a more reliable option?

Spooler · 03-25-2019, 12:35 PM

Only one guy I know of that has a high HP car that drag races. He broke his input shaft on the manual transmission the first time at the track at 26psi. 800+hp being reliable is very difficult at the moment. I am building for right at 800hp and will keep it turned down until things are figured out. One of the higher HP cars didn't make it long before the motor let go. Not sure why, he hasn't posted anything in a while. The other car has been rebuilt a couple of times. Not sure how his car is doing either. SOHO did a big build a while back for a drag car and I haven't seen anything on that car either. I think the guy is scared to death of it. There is no magic formula at the moment to keep them reliable. I have enough fuel and turbo's to be up in the 900hp range. I have just chosen to keep the boost down and I hope to stay reliable. We shall see. My build is just about finished.

Spooler · 03-25-2019, 01:02 PM

Seb at Specialty Z is another one I just about forgot. He is at 900hp or so. I am not sure how many miles he has on it. He had to do a few things to keep the headgaskets sealed up to his liking.

Spooler · 03-25-2019, 01:03 PM

Quote:
Originally Posted by Chrisc3 View Post
Yeah that's what I figured as I have been following those high hp guys builds for a few years and I applaud them for raising the bar, but I was just curious if any of these builds are actually and most importantly driven, as I haven't seen them post much other than dyno charts and build sheets.

The one guy that broke his input shaft was going to use his. He is saving up to upgrade the tranny to a Hollinger Sequential. I messaged with him the other day and he had a life event. He was pushed off the road by an 18 wheeler into on coming traffic. He hit an 18 wheeler on that side of the interstate. The 18 wheeler that pushed him off the road took off. So, he is out for a while due to injuries. He was in a daily driver. This is the only car I know that was being used as intended. He is not on the forum much. MA-motorsports did his build quietly. Some days I wish I would have done the same, Quietly....

370zbeast · 03-26-2019, 08:46 AM

This is great topic. I had a GMC syclone and ran high boost, made to 80,000 miles till I broke a a piston. I always ran good fuel (before e85). Id like to believe a 14lb z on e85 could live a long life (I'm hoping) any information on this subject would be appreciated.

bullitt5897 · 03-26-2019, 01:55 PM

OP,

I take it you haven't driven this platform in High HP fashion. I have about 15k miles in different setups all at 1000bhp+. I can tell you definitively you will not want to daily the vehicle at this power level. I have found that the chassis is more compliant at around 700whp. Anything above this and it starts to become a handful to drive. You can get a lot of miles out of a 700whp setup. A good solid motor build will get you up to 700-800whp+. You will want a closed deck block with anything over 20psi. Most if not 90+% of the guys running big power are on a closed deck block.

I would set your glory numbers and then drop down to something a little more compliant. with a TT set up you can always turn up the boost.

Spooler · 03-26-2019, 02:11 PM

Quote:

Originally Posted by bullitt5897

OP,

I take it you haven't driven this platform in High HP fashion. I have about 15k miles in different setups all at 1000bhp+. I can tell you definitively you will not want to daily the vehicle at this power level. I have found that the chassis is more compliant at around 700whp. Anything above this and it starts to become a handful to drive. You can get a lot of miles out of a 700whp setup. A good solid motor build will get you up to 700-800whp+. You will want a closed deck block with anything over 20psi. Most if not 90+% of the guys running big power are on a closed deck block.

I would set your glory numbers and then drop down to something a little more compliant. with a TT set up you can always turn up the boost.

How did you do your new engine build. Wondering what you did this time since you have been leading the charge for a while.

Chrisc3 · 03-26-2019, 03:06 PM

Quote:

Originally Posted by Spooler

How did you do your new engine build. Wondering what you did this time since you have been leading the charge for a while.

Very curious about this as well. Ideally I would like to be able to turn the boost down track it, take small road trips, turn it up, possibly do some roll race events ect. I understand with any build things aren't going to be perfect and there are so many variables, but compared to other engines, how would you rate the vq37 build/cost to reliability/potential ratio compared to other engines 2J, LS ?

Spooler · 03-26-2019, 08:29 PM

Quote:

Originally Posted by Chrisc3

Very curious about this as well. Ideally I would like to be able to turn the boost down track it, take small road trips, turn it up, possibly do some roll race events ect. I understand with any build things aren't going to be perfect and there are so many variables, but compared to other engines, how would you rate the vq37 build/cost to reliability/potential ratio compared to other engines 2J, LS ?

Guess he is not going to say. He has been tight lipped about this one.

Chrisc3 · 03-26-2019, 08:47 PM

bullitt5897 · 03-28-2019, 12:57 PM

Sorry guys been offline the last day or two taking care of my new born.

My new engine is as follows:
RJM closed deck block
LA sleeved
Stepped deck
O ring heads
Ca 625+ head studs
Oem headgaskets
Custom wiseco pistons
Custom Carrillo rods 625+ rod bolts
King bearings
Custom forged stroker crank
RJM custom ported heads
+1mm intake and +1mm exhaust valves (custom)
Super tech dual spring setup
Jun 272 cams

I am sure I am missing some other stuff but these are the basics.

bullitt5897 · 03-28-2019, 12:59 PM

The motor has already seen 46psi of boost yesterday during some road testing. Needless to say the car is extremely violent at that boost level!

TopgunZ · 03-28-2019, 08:31 PM

So are you street tuning a 46 psi car?

bullitt5897 · 03-28-2019, 09:24 PM

Quote:

Originally Posted by TopgunZ

So are you street tuning a 46 psi car?

No we are doing custom maps with ecutek a truly flex map. Depending on flex content boost will scale. We turned it down after a few pulls. It’s way too violent on the street and was a handful to say the least. We confirmed it worked and turned it back down. We are trying some stuff that hasn’t been done on the Z platform before.

bullitt5897 · 03-28-2019, 09:27 PM

Additionally we already had rented a dyno a few weeks ago and spent an entire day getting everything settled. Right now we are working on the extras. Once that’s done we will go for final numbers... at 46psi conservatively we are at 1300whp based on our already dyno numbers

03-25-2019, 12:16 PM	#1 (permalink)
Chrisc3 Base Member Join Date: Nov 2014 Location: texas Posts: 123 Drives: 2009 370z white Rep Power: 11	Any boosted High hp high mileage vqs out there? Am looking at building the z 800whp+ and was wondering how the vq platform is holding up. I know a few guys hit the 1000hp milestones, butt how do these cars perform off the dyno. Other than a dyno graph, Can these cars be driven? 1/4 times? drivability? Reliability? or would a swap would be a more reliable option?

03-26-2019, 08:46 AM	#5 (permalink)
370zbeast Base Member Join Date: Dec 2015 Location: West Texas Posts: 20 Drives: 2015 370 nismo Rep Power: 9	This is great topic. I had a GMC syclone and ran high boost, made to 80,000 miles till I broke a a piston. I always ran good fuel (before e85). Id like to believe a 14lb z on e85 could live a long life (I'm hoping) any information on this subject would be appreciated. Chrisc3 likes this.

03-26-2019, 01:55 PM	#6 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	OP, I take it you haven't driven this platform in High HP fashion. I have about 15k miles in different setups all at 1000bhp+. I can tell you definitively you will not want to daily the vehicle at this power level. I have found that the chassis is more compliant at around 700whp. Anything above this and it starts to become a handful to drive. You can get a lot of miles out of a 700whp setup. A good solid motor build will get you up to 700-800whp+. You will want a closed deck block with anything over 20psi. Most if not 90+% of the guys running big power are on a closed deck block. I would set your glory numbers and then drop down to something a little more compliant. with a TT set up you can always turn up the boost. Chrisc3 likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

03-28-2019, 12:57 PM	#11 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Sorry guys been offline the last day or two taking care of my new born. My new engine is as follows: RJM closed deck block LA sleeved Stepped deck O ring heads Ca 625+ head studs Oem headgaskets Custom wiseco pistons Custom Carrillo rods 625+ rod bolts King bearings Custom forged stroker crank RJM custom ported heads +1mm intake and +1mm exhaust valves (custom) Super tech dual spring setup Jun 272 cams I am sure I am missing some other stuff but these are the basics. JLarson likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

03-28-2019, 12:59 PM	#12 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	The motor has already seen 46psi of boost yesterday during some road testing. Needless to say the car is extremely violent at that boost level! wideglideleon likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

03-25-2019, 12:35 PM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Only one guy I know of that has a high HP car that drag races. He broke his input shaft on the manual transmission the first time at the track at 26psi. 800+hp being reliable is very difficult at the moment. I am building for right at 800hp and will keep it turned down until things are figured out. One of the higher HP cars didn't make it long before the motor let go. Not sure why, he hasn't posted anything in a while. The other car has been rebuilt a couple of times. Not sure how his car is doing either. SOHO did a big build a while back for a drag car and I haven't seen anything on that car either. I think the guy is scared to death of it. There is no magic formula at the moment to keep them reliable. I have enough fuel and turbo's to be up in the 900hp range. I have just chosen to keep the boost down and I hope to stay reliable. We shall see. My build is just about finished.

03-25-2019, 01:02 PM	#3 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Seb at Specialty Z is another one I just about forgot. He is at 900hp or so. I am not sure how many miles he has on it. He had to do a few things to keep the headgaskets sealed up to his liking.

03-25-2019, 01:03 PM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Quote: Originally Posted by Chrisc3 View Post Yeah that's what I figured as I have been following those high hp guys builds for a few years and I applaud them for raising the bar, but I was just curious if any of these builds are actually and most importantly driven, as I haven't seen them post much other than dyno charts and build sheets. The one guy that broke his input shaft was going to use his. He is saving up to upgrade the tranny to a Hollinger Sequential. I messaged with him the other day and he had a life event. He was pushed off the road by an 18 wheeler into on coming traffic. He hit an 18 wheeler on that side of the interstate. The 18 wheeler that pushed him off the road took off. So, he is out for a while due to injuries. He was in a daily driver. This is the only car I know that was being used as intended. He is not on the forum much. MA-motorsports did his build quietly. Some days I wish I would have done the same, Quietly....

03-26-2019, 08:47 PM	#10 (permalink)
Chrisc3 Base Member Join Date: Nov 2014 Location: texas Posts: 123 Drives: 2009 370z white Rep Power: 11

03-28-2019, 08:31 PM	#13 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6834	So are you street tuning a 46 psi car? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

03-28-2019, 09:27 PM	#15 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Additionally we already had rented a dyno a few weeks ago and spent an entire day getting everything settled. Right now we are working on the extras. Once that’s done we will go for final numbers... at 46psi conservatively we are at 1300whp based on our already dyno numbers __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any high hp high mileage boosted guys out there?	Chrisc3	Nissan 370Z General Discussions	8	03-25-2019 01:06 PM
High mileage Z	SteveBad	Nissan 370Z General Discussions	4	11-10-2018 05:44 PM
High mileage	srbrubak	Nissan 370Z General Discussions	1	07-29-2018 09:46 PM
370Z For Sale WTB high mileage or damaged z	Tb09z	370Z For Sale	5	04-19-2018 09:29 AM
thoughts on high mileage?	stancedz	Nissan 370Z Pricing / Ordering Discussions	13	05-18-2014 09:55 AM