Ma-Motorsports Boosted performance turbo build

Elmo370z · 08-20-2020, 10:28 AM

Quote:

Originally Posted by Spooler

MA has my Varis rear diffuser.... Just sayin. I gave it to them.

Ssfirehawk has it, looks good.

Rusty · 08-20-2020, 11:08 AM

Quote:

Originally Posted by Elmo370z

I’ll be blowing you when the time comes.

fify

gbrettin · 08-20-2020, 11:47 AM

Oh, I thought you were going a different direction other than Verus?

I was planning on getting my Verus installed over the next couple months. See what kind of modifications need to be done with the F.I. exhaust. SS Firehawk is getting some laser cut metal extensions, said something about 250-300 for them. I'll go and hack me up some scrap shop metal and paint that before I spend 250 on hardware. lol

Elmo370z · 08-20-2020, 12:17 PM

Quote:

Originally Posted by gbrettin

Oh, I thought you were going a different direction other than Verus?

I was planning on getting my Verus installed over the next couple months. See what kind of modifications need to be done with the F.I. exhaust. SS Firehawk is getting some laser cut metal extensions, said something about 250-300 for them. I'll go and hack me up some scrap shop metal and paint that before I spend 250 on hardware. lol

This is temporary until everything is good. Already made too many changes on the car. Yeah they are getting delivered today. I want to see if this helps the rear end settle down under heavy braking coming into high speed corners.

Hotrodz · 08-20-2020, 12:25 PM

Quote:

Originally Posted by Rusty

fify

Your not right in the head!

Sent from my SM-G965U using Tapatalk

Spooler · 08-20-2020, 12:27 PM

Quote:

Originally Posted by Hotrodz

Your not right in the head!

Sent from my SM-G965U using Tapatalk

Rusty has been hanging around Zoren too much!!!!!

Hotrodz · 08-20-2020, 12:36 PM

Quote:

Originally Posted by Elmo370z

This is temporary until everything is good. Already made too many changes on the car. Yeah they are getting delivered today. I want to see if this helps the rear end settle down under heavy braking coming into high speed corners.

My guess is you will not see much of difference. The main reason is because you don't have a flat floor and your rear bumper is a giant parachute. The diffuser would have to extend beyond the rear diff to be effective. This is why you see so many track cars with shaved bumpers. Just letting the air flow unimpeded by the bumper will create less drag and a small amount of downforce.

What are you struggling with in cornering and were is it happening, turn in, mid corner or exit? Also is it high speed turns above 60 or 70 mph, slow speed or all of the?

Sent from my SM-G965U using Tapatalk

Elmo370z · 08-20-2020, 10:59 PM

Quote:

Originally Posted by Hotrodz

My guess is you will not see much of difference. The main reason is because you don't have a flat floor and your rear bumper is a giant parachute. The diffuser would have to extend beyond the rear diff to be effective. This is why you see so many track cars with shaved bumpers. Just letting the air flow unimpeded by the bumper will create less drag and a small amount of downforce.

What are you struggling with in cornering and were is it happening, turn in, mid corner or exit? Also is it high speed turns above 60 or 70 mph, slow speed or all of the?

Sent from my SM-G965U using Tapatalk

I just hoping it will take the rear end down under high speed braking and trail braking. I don’t like how it moves. High speed cornering is fine. I’ve gone flat footing around turn 9 @ R.A. And done 113 through bishops bend @ sebring. I mean turn in due tire and suspension work, it was all oem besides hotchkis front sway and spl end links. Corner exit I was on a oem diff with a diff cooler. Oem alignment. I was working with what I had, all my money was saving for this build.

Hotrodz · 08-21-2020, 12:06 PM

Quote:

Originally Posted by Elmo370z

I just hoping it will take the rear end down under high speed braking and trail braking. I don’t like how it moves. High speed cornering is fine. I’ve gone flat footing around turn 9 @ R.A. And done 113 through bishops bend @ sebring. I mean turn in due tire and suspension work, it was all oem besides hotchkis front sway and spl end links. Corner exit I was on a oem diff with a diff cooler. Oem alignment. I was working with what I had, all my money was saving for this build.

Copy that! Sounds like you might be at the limit of what your Z can do given the tracks you drive on and no suspension upgrades. You need coilovers to help with stability and if you haven't done so remove or detach your rear sway bar and see if that helps.

To perfectly honest, I have spent the money for the rear diffuser to by quality suspension parts. That is where the benefits are at. I built my suspension before before I ever hit the track.

Sent from my SM-G965U using Tapatalk

Elmo370z · 08-21-2020, 12:35 PM

Quote:

Originally Posted by Hotrodz

Copy that! Sounds like you might be at the limit of what your Z can do given the tracks you drive on and no suspension upgrades. You need coilovers to help with stability and if you haven't done so remove or detach your rear sway bar and see if that helps.

To perfectly honest, I have spent the money for the rear diffuser to by quality suspension parts. That is where the benefits are at. I built my suspension before before I ever hit the track.

Sent from my SM-G965U using Tapatalk

I ran no rear sway. When the car comes back I’ll be on swift springs, oem Nismo shocks, oem mid links, oem Nismo shocks, and full spl everything down to the bushings, knuckles, arms etc.... hopefully this will help. I’ll run oem alignment until I get used to the car, then I’ll take the car to speed syndicate for a track alignment, run street tires for a track day, then throw on the slicks. If I don’t run into any mechanical issues along the way

Elmo370z · 08-21-2020, 12:36 PM

Quote:

Originally Posted by Hotrodz

Copy that! Sounds like you might be at the limit of what your Z can do given the tracks you drive on and no suspension upgrades. You need coilovers to help with stability and if you haven't done so remove or detach your rear sway bar and see if that helps.

To perfectly honest, I have spent the money for the rear diffuser to by quality suspension parts. That is where the benefits are at. I built my suspension before before I ever hit the track.

Sent from my SM-G965U using Tapatalk

I’m dying to run these Ferrari Challenge pzero slicks.

Hotrodz · 08-21-2020, 02:27 PM

Quote:

Originally Posted by Elmo370z

I ran no rear sway. When the car comes back I’ll be on swift springs, oem Nismo shocks, oem mid links, oem Nismo shocks, and full spl everything down to the bushings, knuckles, arms etc.... hopefully this will help. I’ll run oem alignment until I get used to the car, then I’ll take the car to speed syndicate for a track alignment, run street tires for a track day, then throw on the slicks. If I don’t run into any mechanical issues along the way

Why not just get the track alignment? The car is going to be totally new to you anyway and the track alignment will only make it handle better. I guess if you are just curious to see what the real difference is in the two alignment setups that's cool but other than that I don't see any benefit to driving a dedicated track car with a OEM setup. Anyway you are going to have a blast with it.

Sent from my SM-G965U using Tapatalk

Hotrodz · 08-21-2020, 02:28 PM

Quote:

Originally Posted by Elmo370z

I’m dying to run these Ferrari Challenge pzero slicks.

I have never run slicks either but that will be changing too!

Sent from my SM-G965U using Tapatalk

Elmo370z · 08-21-2020, 03:04 PM

Quote:

Originally Posted by Hotrodz

Why not just get the track alignment? The car is going to be totally new to you anyway and the track alignment will only make it handle better. I guess if you are just curious to see what the real difference is in the two alignment setups that's cool but other than that I don't see any benefit to driving a dedicated track car with a OEM setup. Anyway you are going to have a blast with it.

Sent from my SM-G965U using Tapatalk

Driving it 10 hours to get picked up, or slight chance I have to drive it 18 hours to get it back home.

Elmo370z · 08-21-2020, 03:07 PM

Quote:

Originally Posted by Hotrodz

Why not just get the track alignment? The car is going to be totally new to you anyway and the track alignment will only make it handle better. I guess if you are just curious to see what the real difference is in the two alignment setups that's cool but other than that I don't see any benefit to driving a dedicated track car with a OEM setup. Anyway you are going to have a blast with it.

Sent from my SM-G965U using Tapatalk

Plus I want to drive it on the streets when I first get the car back. It’s say long enough. I’m going to enjoy everything about, turning it on, pissing off my neighbors, filling it up with E, feeling all 7-800 HP. Might even do some roll racing or 1/2 mile event.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Diabel's Boosted Performance Single Turbo Build	Diabel	Member's 370Z Gallery	129	06-19-2019 07:40 AM
Stefonelee Boosted Performance turbo build	stefonelee	Forced Induction	32	01-21-2017 08:56 AM
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance or Custom Turbo Build	Neil912	Forced Induction	47	02-07-2015 01:11 PM
>>>>>Puckshaw's Boosted Performance Twin Scroll Single Turbo Build<<<<<	puckshaw	Member's 370Z Gallery	245	05-24-2014 04:13 PM

08-20-2020, 11:47 AM	#168 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,279 Drives: Tricycle Rep Power: 589151	Oh, I thought you were going a different direction other than Verus? I was planning on getting my Verus installed over the next couple months. See what kind of modifications need to be done with the F.I. exhaust. SS Firehawk is getting some laser cut metal extensions, said something about 250-300 for them. I'll go and hack me up some scrap shop metal and paint that before I spend 250 on hardware. lol