Ma-Motorsports Boosted performance turbo build

Elmo370z · 04-28-2019, 09:34 PM

Quote:

Originally Posted by Senna-F1

Ok. Good to know. But spooler specifically mentioned doing one or both would blow your head gasket.

“Bye-Bye headgasket on a boosted car.” Hence my question.

I think my non-boosted cars 2 step is set at about 2500, or something close to as low as it can go. With a centrifugal boost would be at 1 psi.

Is that going to blow a head gasket? I know I’m not the only person here who hasn’t heard of that, and would like to know if their Ecutek/Uprev tuned and boosted car is gonna let go because they used the 2-step their tuner gave them.

It’s when it goes out, will it go out if you use one or ten times yes and no. Point is, it’s not a smart way of doing things. Your money do you want. 2 stepping NA is pointless, no data to support it helps, just learn how to launch the car. Contact real street they will have solution to get you to launch your car properly. You want to learn more start your own thread about it you will get a plethora of answers

Elmo370z · 07-30-2019, 08:35 PM

I have to upgrade my clutch. Wish I had know from the start I would of gotten a quad disk OSG. *#%*#*%%%*

Rusty · 07-30-2019, 08:47 PM

Quote:

Originally Posted by Elmo370z

I have to upgrade my clutch. Wish I had know from the start I would of gotten a quad disk OSG. *#%*#*%%%*

You mean a triple plate.

Elmo370z · 07-30-2019, 09:21 PM

Quote:

Originally Posted by Rusty

You mean a triple plate.

Quad disk. Cost the same as a ATS triple and about 2k less then a triple ATS carbon

Rusty · 07-30-2019, 09:41 PM

Quote:

Originally Posted by Elmo370z

Quad disk. Cost the same as a ATS triple and about 2k less then a triple ATS carbon

Just looked at them. About $2,500.

Streetz · 07-30-2019, 09:43 PM

OSG told me to not get the quad disk that it would break the trans. The triple is rated to 1600hp anyways. would never need more

Elmo370z · 07-30-2019, 09:49 PM

Quote:

Originally Posted by Streetz

OSG told me to not get the quad disk that it would break the trans. The triple is rated to 1600hp anyways. would never need more

What is the triple rates for torque? That’s my issue

Elmo370z · 07-30-2019, 09:50 PM

Quote:

Originally Posted by Streetz

OSG told me to not get the quad disk that it would break the trans. The triple is rated to 1600hp anyways. would never need more

Cjm only made 800whp and there triple OSG no good, plus rebuild is next to
Impossible

Spooler · 07-30-2019, 10:11 PM

Quote:

Originally Posted by Elmo370z

I have to upgrade my clutch. Wish I had know from the start I would of gotten a quad disk OSG. *#%*#*%%%*

This sounds too familiar. The life of "Oh Crap, I made a mistake. This is gonna cost me."

Spooler · 07-30-2019, 10:15 PM

Quote:

Originally Posted by Elmo370z

Cjm only made 800whp and there triple OSG no good, plus rebuild is next to
Impossible

That's his car, Streetz. That's Justin.

See: CJM (Justin's) drag build

Spooler · 07-30-2019, 10:22 PM

Quote:

Originally Posted by Elmo370z

Cjm only made 800whp and there triple OSG no good, plus rebuild is next to
Impossible

Thank goodness ATS hooked me up with little trouble. Did you check with Jon at MA-Motorsports on upgrading you current clutch to a triple?

Elmo370z · 07-31-2019, 12:00 AM

Quote:

Originally Posted by Spooler

Thank goodness ATS hooked me up with little trouble. Did you check with Jon at MA-Motorsports on upgrading you current clutch to a triple?

No I been talking to jon at corner 3 motorsports. The triple has a different casing he said. But I’ll talk to jon

Spooler · 07-31-2019, 12:18 AM

Quote:

Originally Posted by Elmo370z

No I been talking to jon at corner 3 motorsports. The triple has a different casing he said. But I’ll talk to jon

Jon@ma-motorsports.com will drop an email off to ATS. You can see what they say. I would think that it is very similar to mine. Surprise me if it wasn't.

Elmo370z · 07-31-2019, 02:00 AM

Quote:

Originally Posted by Spooler

Jon@ma-motorsports.com will drop an email off to ATS. You can see what they say. I would think that it is very similar to mine. Surprise me if it wasn't.

I’ll shoot him a email tonight

Elmo370z · 08-31-2019, 03:35 PM

Upgraded my hangers so I don’t have to deal with them breaking again

07-30-2019, 08:35 PM	#47 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	I have to upgrade my clutch. Wish I had know from the start I would of gotten a quad disk OSG. #%#%%% Hotrodz and Spooler like this.

07-30-2019, 09:43 PM	#51 (permalink)
Streetz Base Member Join Date: Aug 2015 Location: Chicago Posts: 59 Drives: 2011 370zTT 818whp Rep Power: 10	OSG told me to not get the quad disk that it would break the trans. The triple is rated to 1600hp anyways. would never need more Elmo370z and Spooler like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Diabel's Boosted Performance Single Turbo Build	Diabel	Member's 370Z Gallery	129	06-19-2019 07:40 AM
Stefonelee Boosted Performance turbo build	stefonelee	Forced Induction	32	01-21-2017 08:56 AM
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 12:17 PM
Boosted Performance or Custom Turbo Build	Neil912	Forced Induction	47	02-07-2015 01:11 PM
>>>>>Puckshaw's Boosted Performance Twin Scroll Single Turbo Build<<<<<	puckshaw	Member's 370Z Gallery	245	05-24-2014 04:13 PM