Nissan 370Z Forum
Page 4 of 46 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Ma-Motorsports Boosted performance turbo build (http://www.the370z.com/forced-induction/130226-ma-motorsports-boosted-performance-turbo-build.html)

Elmo370z 04-28-2019 08:34 PM
Quote:
Originally Posted by Senna-F1 (Post 3847541)
Ok. Good to know. But spooler specifically mentioned doing one or both would blow your head gasket.

“Bye-Bye headgasket on a boosted car.” Hence my question.

I think my non-boosted cars 2 step is set at about 2500, or something close to as low as it can go. With a centrifugal boost would be at 1 psi.

Is that going to blow a head gasket? I know I’m not the only person here who hasn’t heard of that, and would like to know if their Ecutek/Uprev tuned and boosted car is gonna let go because they used the 2-step their tuner gave them.
It’s when it goes out, will it go out if you use one or ten times yes and no. Point is, it’s not a smart way of doing things. Your money do you want. 2 stepping NA is pointless, no data to support it helps, just learn how to launch the car. Contact real street they will have solution to get you to launch your car properly. You want to learn more start your own thread about it you will get a plethora of answers

Elmo370z 07-30-2019 07:35 PM
I have to upgrade my clutch. Wish I had know from the start I would of gotten a quad disk OSG. *#%*#*%%%*

Rusty 07-30-2019 07:47 PM
Quote:
Originally Posted by Elmo370z (Post 3870202)
I have to upgrade my clutch. Wish I had know from the start I would of gotten a quad disk OSG. *#%*#*%%%*
You mean a triple plate.

Elmo370z 07-30-2019 08:21 PM
Quote:
Originally Posted by Rusty (Post 3870206)
You mean a triple plate.
Quad disk. Cost the same as a ATS triple and about 2k less then a triple ATS carbon

Rusty 07-30-2019 08:41 PM
Quote:
Originally Posted by Elmo370z (Post 3870212)
Quad disk. Cost the same as a ATS triple and about 2k less then a triple ATS carbon
Just looked at them. About $2,500.

Streetz 07-30-2019 08:43 PM
OSG told me to not get the quad disk that it would break the trans. The triple is rated to 1600hp anyways. would never need more

Elmo370z 07-30-2019 08:49 PM
Quote:
Originally Posted by Streetz (Post 3870220)
OSG told me to not get the quad disk that it would break the trans. The triple is rated to 1600hp anyways. would never need more
What is the triple rates for torque? That’s my issue

Elmo370z 07-30-2019 08:50 PM
Quote:
Originally Posted by Streetz (Post 3870220)
OSG told me to not get the quad disk that it would break the trans. The triple is rated to 1600hp anyways. would never need more
Cjm only made 800whp and there triple OSG no good, plus rebuild is next to
Impossible

Spooler 07-30-2019 09:11 PM
Quote:
Originally Posted by Elmo370z (Post 3870202)
I have to upgrade my clutch. Wish I had know from the start I would of gotten a quad disk OSG. *#%*#*%%%*

This sounds too familiar. The life of "Oh Crap, I made a mistake. This is gonna cost me."

Spooler 07-30-2019 09:15 PM
Quote:
Originally Posted by Elmo370z (Post 3870223)
Cjm only made 800whp and there triple OSG no good, plus rebuild is next to
Impossible
That's his car, Streetz. That's Justin.

See: http://www.the370z.com/forced-induct...g-build-4.html

Spooler 07-30-2019 09:22 PM
Quote:
Originally Posted by Elmo370z (Post 3870223)
Cjm only made 800whp and there triple OSG no good, plus rebuild is next to
Impossible
Thank goodness ATS hooked me up with little trouble. Did you check with Jon at MA-Motorsports on upgrading you current clutch to a triple?

Elmo370z 07-30-2019 11:00 PM
Quote:
Originally Posted by Spooler (Post 3870228)
Thank goodness ATS hooked me up with little trouble. Did you check with Jon at MA-Motorsports on upgrading you current clutch to a triple?
No I been talking to jon at corner 3 motorsports. The triple has a different casing he said. But I’ll talk to jon

Spooler 07-30-2019 11:18 PM
Quote:
Originally Posted by Elmo370z (Post 3870249)
No I been talking to jon at corner 3 motorsports. The triple has a different casing he said. But I’ll talk to jon
Jon@ma-motorsports.com will drop an email off to ATS. You can see what they say. I would think that it is very similar to mine. Surprise me if it wasn't.

Elmo370z 07-31-2019 01:00 AM
Quote:
Originally Posted by Spooler (Post 3870251)
Jon@ma-motorsports.com will drop an email off to ATS. You can see what they say. I would think that it is very similar to mine. Surprise me if it wasn't.
I’ll shoot him a email tonight

Elmo370z 08-31-2019 02:35 PM
2 Attachment(s)
Upgraded my hangers so I don’t have to deal with them breaking again


All times are GMT -5. The time now is 07:40 PM.
Page 4 of 46 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2