It is done. Standby for numbers....

sirnixalot · 02-26-2019, 05:25 PM

My apologies, I saw map 1 was for 93 (with flex option) and assumed those results were 93oct

solidus · 02-26-2019, 05:39 PM

Quote:

Originally Posted by Spooler

So that is your issue, the power is just reading low. 5xxhp at 10psi is not bad no matter the fuel you are using.

Nah trust me on this one. Remember I'm holding 4 more runs in my pocket waiting on a consult. That said, the other power is nothing to sneeze at, it's just not normal.

Spooler · 02-26-2019, 07:24 PM

551hp at 10psi of boost and 10:1 compression is very good. It normaly takes 11-11.5 psi of boost on an 11:1 compression motor to make around 585hp.

Spooler · 02-26-2019, 07:27 PM

Did you ever test for a boost leak? Something that should always be done on a new build.

solidus · 02-26-2019, 07:35 PM

Quote:

Originally Posted by Spooler

Did you ever test for a boost leak? Something that should always be done on a new build.

Not thinking it's a boost leak , yet. Still waiting for Seb to check out the log and the dyno graphs. I have a suspicion but I'll bounce it off of Seb before bringing it into the light. Just respect for my tuner and his opinion.

Spooler · 02-26-2019, 07:53 PM

That is the only bad thing about having it remote tuned. It takes more time. I am sure not worried or saying anything bad about Seb's tuning. He is the man with these cars. IMHO, the best place for a car to be tuned is on a chassis dyno. If my car was done, I would be willing to fly him out here to tune my car. Just keep that in mind. I am not far from you.

solidus · 02-26-2019, 08:06 PM

I actually wanted to fly him here. I still have faith. My suspicion has to do with things outside the tune.

Spooler · 02-26-2019, 08:15 PM

Well hang on. We may can do this together if need be. He is just a busy man. I am sure my tune from MA will be good. I just feel like a tune from Seb will be perfect and that is more up my alley. I am a perfectionist like it or not.

solidus · 03-04-2019, 04:59 PM

Alright folks time for full disclosure amongst the wolves.
After forwarding the run files to Seb it was definitive that there was wheel slip on every run. Surprisingly the highest amount of slip was on Run 1 at 10psi. Seb recommended that the runs be made in 5th gear and not 4th and also to use VHT on the drums to mitigate slip.
The wrench in my whole situation is another "Why me god" circumstance. During the completion of the longblock I admittedly broke a cardinal rule of VQ or any build for that matter. I allowed someone unfamiliar with our platforms to perform the work. What that led to is during the course of install when the VVEL solenoids were swapped over the installer basically did a scientific wild *** guess as to the synchronization of the solenoids. That problem is almost impossible to tell when the car is running but very evident on start. When I realized it I was disgusted but pushed through with tuning. Seb tried to work it out through the tune but it's still there in the form of very hard starting and catching a start on the first try is like hitting the lottery. This will be fixed soon as I've found a connection with the Consult needed to remedy.
I modeled my build on Diabels but left out a few things which I'll be changing to. First I have the 1.15ar housing which will be going to 1.32 and secondly I want to bump the downpipe to 3.5 from 3". At that point with the corrections the car will definitely be where it should.
So here are what you all really want.
On a side note: The car hit a max boost of 18.3 on the dyno , the only times it's gone to the 20psi in map 4 is on street pulls. Elmo got a taste of 20psi , with a peak of 21.4 .
Ok......graphs , discussions and slaps on the head.

solidus · 03-04-2019, 05:01 PM

Dammit!! Had to do a return to amazon and they wanted proof. Heres runs 4 and 5.

sirnixalot · 03-04-2019, 05:34 PM

Glad you got it figured out! The VVEL motor part sucks though.

Rusty · 03-04-2019, 05:53 PM

Quote:

Originally Posted by sirnixalot

Glad you got it figured out! The VVEL motor part sucks though.

Spooler · 03-04-2019, 08:01 PM

Get her fixed, go back, and try again. Stick with it.

solidus · 03-04-2019, 08:19 PM

It's still a beast Spooler. Just not a perfect predator......yet.

Spooler · 03-04-2019, 08:20 PM

Fixing Gremlins is part of any build. Sometimes they are big Gremilins and sometimes they are small little monkeys that aggravate you.

02-26-2019, 05:25 PM	#16 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57454	My apologies, I saw map 1 was for 93 (with flex option) and assumed those results were 93oct __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

02-26-2019, 07:24 PM	#18 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	551hp at 10psi of boost and 10:1 compression is very good. It normaly takes 11-11.5 psi of boost on an 11:1 compression motor to make around 585hp. Baronsmokes likes this.

02-26-2019, 07:53 PM	#21 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	That is the only bad thing about having it remote tuned. It takes more time. I am sure not worried or saying anything bad about Seb's tuning. He is the man with these cars. IMHO, the best place for a car to be tuned is on a chassis dyno. If my car was done, I would be willing to fly him out here to tune my car. Just keep that in mind. I am not far from you. Baronsmokes likes this.

02-26-2019, 08:06 PM	#22 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	I actually wanted to fly him here. I still have faith. My suspicion has to do with things outside the tune. Baronsmokes likes this.

02-26-2019, 08:15 PM	#23 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Well hang on. We may can do this together if need be. He is just a busy man. I am sure my tune from MA will be good. I just feel like a tune from Seb will be perfect and that is more up my alley. I am a perfectionist like it or not. Rusty, Hotrodz, madwi and 3 others like this.

02-26-2019, 07:27 PM	#19 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Did you ever test for a boost leak? Something that should always be done on a new build.

03-04-2019, 05:34 PM	#26 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57454	Glad you got it figured out! The VVEL motor part sucks though. Rusty and solidus like this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

03-04-2019, 08:01 PM	#28 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Get her fixed, go back, and try again. Stick with it. solidus likes this.

03-04-2019, 08:19 PM	#29 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	It's still a beast Spooler. Just not a perfect predator......yet. Baronsmokes likes this.

03-04-2019, 08:20 PM	#30 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Fixing Gremlins is part of any build. Sometimes they are big Gremilins and sometimes they are small little monkeys that aggravate you. Rusty and Hotrodz like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My dyno numbers	RumbleFish	Tuning	17	02-28-2014 09:17 PM
Performance Numbers	Nismoracer	Nismo 370Z	4	12-04-2010 02:45 AM
Any VPP numbers out there?	280z/300zx	Nissan 370Z Pricing / Ordering Discussions	2	10-26-2010 08:45 PM
Earliest VIN numbers	jehamilton_98	Nissan 370Z General Discussions	28	03-18-2010 11:58 PM
My numbers are bad....	HT Rambler	Nissan 370Z General Discussions	12	10-19-2009 09:09 PM