Happened again to me today on the freeway and this was on the new revised one that I installed within the last year or so. Fortunately I had my obd2
|
|
LinkBack | Thread Tools | Display Modes |
04-11-2019, 09:36 PM | #16 (permalink) |
Base Member
Join Date: Apr 2017
Location: Orange County CA
Posts: 6
Drives: Magnetic Black 6MT
Rep Power: 8 |
Happened again to me today on the freeway and this was on the new revised one that I installed within the last year or so. Fortunately I had my obd2 with me I was stuck in the fast lane till I cleared the code (p1239)
__________________
Stillen SC Fortune Auto Coilovers, Fly1 Motorsports Fenders,VIS CF Hood, Rohana rf2 |
04-12-2019, 02:03 AM | #17 (permalink) |
Base Member
Join Date: Jul 2018
Location: Deutschland
Posts: 8
Drives: Nissan 370Z Nismo FL
Rep Power: 7 |
Oh thanks.
Do you have a Picture of this cable and his location? I see many Cables and i like to Pick the right one :'D I hear about this cable but i dont find it. |
05-14-2019, 03:17 PM | #18 (permalink) |
Base Member
Join Date: Nov 2013
Location: DC
Posts: 28
Drives: 2007 350z
Rep Power: 12 |
Let me tell you the story of my people:
I have a 2007 HR 350z now at about 60K mileage. Three years ago (Summer 2016), I had a local shop install the a Stillen/Vortech supercharger. I have some non-HP supporting mods in the engine, hi-flow cats, and a motordyne exhaust. I wanted a conservative tune since this my daily driver and only car, I have about 400 rwhp and 315 tq. Performance wise I'm very happy with it, and I don't abuse the car. Fun highway driving only. However, I have had multiple problems with the kit. Problem 1: Bad Throttle cables A few months after I bought it, Stillen came out with upgraded Throttle Body Extension cables but deigned not to mass inform their customers. These cables were improved to have a much thicker gauge since the original ones were crimping. Crimping may, and in my case did, cause the engine to not turn on, or go into 'limp mode'. We had to buy the new upgraded cables for $140 and install them. Still, this required a tow and a few days down time. All sets bought post winter 2016 will have these new cables Problem 2: Heat/EMI problems Maybe about 6-12 months after that, it happened again. Was driving just fine, the next morning for work, car turns on, then heavily lurches, dashboard is now a xmas tree. I get it towed to same shop, the check engine light is a P1239 code. This is a very famous code for this error, its all over google and Z forums. After conducting forum research, the 'new' cables Stillen provided still are susceptible to heat and electrical interference, so a heat/EMI sleeve was placed over the cables. Problem 3: Now ******* what? This morning (May 14 2019), the car went into limp mode again. Jesus ****ing christ what now? After several attempted restarts all fail, I call a tow. An hour later, the second the tow gets here, I start up car just fine and it seems perfect, like nothing is wrong albeit with check engine light. It's in the shop now, they are looking at it. So overall, I'm kinda not that happy with Stillen. The performance is great, but this is my only car, so I care more about reliability. Something is seriously wrong with their electrical division, but its the same problem now 3 ****ing times over the past few years. |
05-14-2019, 03:23 PM | #19 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Does anyone know if the 370Z Maf cables are compatible with the HR? If so, I have a pile of Gen 2's sitting in a box.
If anyone needs one I will sell them for $20 a pop.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
05-14-2019, 04:02 PM | #24 (permalink) |
A True Z Fanatic
Join Date: Jun 2012
Location: Minneapolis
Posts: 2,651
Drives: 06 350Z , 09 370Z MT
Rep Power: 6834 |
Unfortunately I dont have the Throttle body extenders, only the MAF extenders.
__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM |
05-14-2019, 06:40 PM | #27 (permalink) |
Track Member
Join Date: Apr 2015
Location: Tucson AZ
Posts: 569
Drives: SC 09 370Z LG 7AT
Rep Power: 64085 |
Of course I replace them myself, you unclip them and plug new ones in. I have tried insulating them, that lasted the longest. I just replaced it again,its always the same one for me that fails. It's always the throttle body extension cable for the drivers side on my car.
Last edited by wideglideleon; 05-14-2019 at 07:22 PM. |
05-14-2019, 06:52 PM | #28 (permalink) |
Base Member
Join Date: Nov 2013
Location: DC
Posts: 28
Drives: 2007 350z
Rep Power: 12 |
dumb question, the cable in question is just the one below right? Nothing more?
http://i66.tinypic.com/2h5qgpe.jpg |
05-14-2019, 08:54 PM | #29 (permalink) | |
Base Member
Join Date: May 2016
Location: Schaumburg
Posts: 62
Drives: 370Z Nismo 2014
Rep Power: 9 |
Quote:
|
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[WTB] EPS Throttle Body Kit | projectpanda | Parts for sale (Private Classifieds) | 0 | 04-03-2018 09:09 AM |
[FOR SALE] Stillen S.C. throttle body to plenum replacement square o-rings | NissanTracker | Parts for sale (Private Classifieds) | 0 | 10-03-2017 01:36 PM |
Stillen S.C. plenum throttle body o-ring part # | NissanTracker | Forced Induction | 3 | 09-17-2017 02:17 PM |
throttle body | Z-fyter | Engine & Drivetrain | 33 | 12-11-2015 06:19 PM |
Throttle body ??? | ScotyBRAVO | Intake/Exhaust | 18 | 06-25-2013 07:38 AM |