Introducing the RJM Positive Displacement Supercharger Kit!

bullitt5897 · 06-09-2018, 03:26 PM

Introducing the RJM Supercharger Kit. This is a Pre-Order and Order List Record. RJM has asked me to keep track of it here for you guys and to open the offer for you to join the Pre-Order. But before we get into all that I wanted to go into some details of the kit:

The RJM Supercharger kit is a twin screw positive displacement supercharger with a capacity of 2.9L. This means for every rotation of the screws 2.9L of air is forced into the plenum. What this means is you have instant boost 100% of the time. The Stage 1 kits start at 12 psi which equate to approximately 500+Wheel HP and 400+Ftlbs of Torque on demand. As seen below you will notice you have an instant torque curve that is flat and a linear power band all the way to red line:

*Dyno completed in Tampa Florida in 98* weather. Stock block and stock 7at Transmission. Noted mods are stillen headers, tomei y Pipe and Amuse exhaust. Also completed on a "heart breaker" dyno.

The power delivery of this kit is perfect for the light weight of our cars. Stage 1 kits can be run on Stock components and is designed to allow the kit to grow with the user without having to replace major components. However, it is suggested for 6mt owners to upgrade their clutches and 7at owners to upgrade their transmissions (RJM has an option better and cheaper than level 10 for 7at owners). Given that the stock block is limited to approximately 500-550ftlbs the stage 1 kit is designed to stay under those limits. If you want more power there are options to go Stage 1.5 and Stage 2 for big power. The Supercharger Core itself is a whipple W175AX Gen3 and has already proven to hit 1200+whp on other platforms @ around 26psi. So needless to say we have room to grow unlike other super charger kits on the market.

Here is a flyer from Zdayz 2018:

So what comes with the "Turn Key" kit?

The "TURN KEY" kit comes with everything you need to install and drive!
-RJM Supercharger Lower Plenum
-RJM Fuel Rail Plenum
-Fuel Hose Adapters and Fittings
-Necessary kit hardware
-1200whp+ Rated Air 2 Water Intercooler
-Twin Pass Bell heat exchanger with a billet Mezeire 55gpm Water Pump
-RJM Supercharger adapter plate
-RJM O-rings for the plenums
-ID1050X Injectors (38mm with custom pigtails)*You have to run RJM Spec'd injectors due to space constraints.
-Bosch 340LPH Drop in Pump *Returnless fuel system for stage 1
-RJM Intake Collector and Throttle Body adapters *Ported to GTR gaskets from the start.
-GTR Throttle body gaskets
-Custom length HD Serpentine belt

Optional Items:
- Custom Pulley sizes
- Larger Injectors 1300cc, 1700cc, 2000cc
- Larger fuel pump and multi pump setups
- Upgraded fuel lines
- Stage 2 Triple Pass heat exchanger
- Anodization and heat dissipation coatings
- Hood Cowl for 370z
- Chromalloy Crash bar

bullitt5897 · 06-09-2018, 03:42 PM

Pricing:

Retail Pricing:
$10,495

Pre-Order: (3 spots left) $500 off
$9,995

bullitt5897 · 06-09-2018, 03:43 PM

Pictures: posting up soon

nomodsjk · 06-09-2018, 04:06 PM

Awesome! Been a long time coming but the wait is finally over!

Korstix · 06-10-2018, 05:50 AM

Being "turnkey", does it not come with a base tune?

axmea? · 06-10-2018, 10:16 AM

Quote:

Originally Posted by nomodsjk

Awesome! Been a long time coming but the wait is finally over!

Congrats Rich! What about your hood? Who is making it?

nomodsjk · 06-10-2018, 05:28 PM

Quote:

Originally Posted by axmea?

Congrats Rich! What about your hood? Who is making it?

Well my car isn't ready yet. I was saying that about the kit being done. Honestly I don't care what Happens with the hood. I'll just be happy to have the car back finally

bullitt5897 · 06-10-2018, 07:30 PM

Quote:

Originally Posted by Korstix

Being "turnkey", does it not come with a base tune?

Yes it will. However, it is highly recommended that you get a custom tune. Everyone’s car and setup is different. But you should be good to drive around on the base tune.

Korstix · 06-11-2018, 06:41 AM

Quote:

Originally Posted by bullitt5897

Yes it will. However, it is highly recommended that you get a custom tune. Everyone’s car and setup is different. But you should be good to drive around on the base tune.

Just driveable to the tuner was my concern. Thanks!

bullitt5897 · 06-12-2018, 11:51 AM

Quote:

Originally Posted by Korstix

Just driveable to the tuner was my concern. Thanks!

You can drive on it just fine. The Car at Zdayz had a base tune on it and we were romping on it for people.

bullitt5897 · 06-13-2018, 01:22 PM

Hey Guys I am looking for a manual transmission car to put a kit on in July. PM me if your interested. So far all our pre-orders are auto cars. Which is surprising!

EZT · 06-13-2018, 02:11 PM

Bullitt, will the Hood cowl fit an AMS style hood, with the vents?

bullitt5897 · 06-13-2018, 08:41 PM

Quote:

Originally Posted by EZT

Bullitt, will the Hood cowl fit an AMS style hood, with the vents?

Yes it will. The hood cowl design will be in a way to fit on any stock profile "strake" hood. meaning if the hood design was based on a OEM profile the hood cowl will fit without issue.

EZT · 07-09-2018, 12:36 PM

How’s the cowl coming along?

B&W_Evader · 07-09-2018, 02:37 PM

More importantly... How's the CARB coming along?

06-09-2018, 03:42 PM	#2 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	Pricing: Retail Pricing: $10,495 Pre-Order: (3 spots left) $500 off $9,995 __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-09-2018, 03:43 PM	#3 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	Pictures: posting up soon __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-09-2018, 04:06 PM	#4 (permalink)
nomodsjk Premium Member Join Date: Apr 2014 Location: martinsburg wv Posts: 2,073 Drives: 2011 370z MB/7at Rep Power: 19962	Awesome! Been a long time coming but the wait is finally over! bullitt5897 and axmea? like this.

06-10-2018, 05:50 AM	#5 (permalink)
Korstix Base Member Join Date: Feb 2017 Location: Christiansburg Virginia Posts: 112 Drives: 2017 370z Sport Rep Power: 3364	Being "turnkey", does it not come with a base tune? ZontheRocks likes this.

06-13-2018, 01:22 PM	#11 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	Hey Guys I am looking for a manual transmission car to put a kit on in July. PM me if your interested. So far all our pre-orders are auto cars. Which is surprising! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

06-13-2018, 02:11 PM	#12 (permalink)
EZT Track Member Join Date: Mar 2011 Location: Gainesville Posts: 546 Drives: 09 370z Rep Power: 316	Bullitt, will the Hood cowl fit an AMS style hood, with the vents?

07-09-2018, 12:36 PM	#14 (permalink)
EZT Track Member Join Date: Mar 2011 Location: Gainesville Posts: 546 Drives: 09 370z Rep Power: 316	How’s the cowl coming along?

07-09-2018, 02:37 PM	#15 (permalink)
B&W_Evader Track Member Join Date: Aug 2011 Location: CA Posts: 972 Drives: slower than before Rep Power: 387	More importantly... How's the CARB coming along? __________________ \|RIP\|6spd-sport\|OSG-LSD\|XP8\|RBF600\|Eibach Sways\|RE-71R\|FI-34Row\|Gen3-CAI\|Yaw P.S.\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Compression ratio and displacement	Wilson2608	Engine & Drivetrain	23	12-29-2014 10:11 PM
good shop for displacement work Seattle are?	mikolrya	North West Region	5	01-17-2014 12:26 AM
A positive from a negative	shadoquad	TheZStore	1	08-24-2010 04:52 PM
On a positive note...!	trent1331	Nissan 370Z General Discussions	12	03-02-2010 05:54 PM
Displacement City	370Zsteve	Other Vehicles	10	02-21-2010 08:04 PM