My built TT 370z is getting tuned today... What power can I expect?

braydo25 · 03-29-2018, 08:18 AM

Done, made 700 after upgrading full system.

Chuck33079 · 03-29-2018, 08:23 AM

If I had to make a wild-*** guess, you'd want to stop around 500whp. Going too much higher sounds sketchy to me with the fuel system you described. The good news is that you should be able to make a ****-ton more power down the line with a bigger pump/injectors/fuel return system.

braydo25 · 03-29-2018, 08:28 AM

Quote:

Originally Posted by Chuck33079

If I had to make a wild-*** guess, you'd want to stop around 500whp. Going too much higher sounds sketchy to me with the fuel system you described. The good news is that you should be able to make a ****-ton more power down the line with a bigger pump/injectors/fuel return system.

Good to know

Yeah, for now just want the car tuned to a safe level. I'll probably get used to it in a month or so and want to push for more power. 750whp on pump was the original goal, hoping to hit that with a full fuel system on 92 octane.

G3RSTY7 · 03-29-2018, 09:10 AM

Who built the block? Will be in for reviews of that. We had a built block blow locally during the break in period and the builder is blaming a foreign object making it into the cylinder or timing causing the piston to hit the valve (or maybe their valve stuck and was hit by piston).

JSur · 03-29-2018, 09:14 AM

I have a stock motor, same fuel pump and 600cc injectors. Made 550whp with no knocks. Only 10.7 lbs of boost. You should definitely be able reach 600whp, or close to it on your setup. Posting vids!?!

Sent from my iPhone using Tapatalk

Chuck33079 · 03-29-2018, 09:18 AM

Quote:

Originally Posted by JSur

I have a stock motor, same fuel pump and 600cc injectors. Made 550whp with no knocks. Only 10.7 lbs of boost. You should definitely be able reach 600whp on your setup. Posting vids!?!

Sent from my iPhone using Tapatalk

Yeah, but you get better gas in Florida. I'm sure there's 600 in it, but if the plan is to later add fuel and really put that built motor to use, he might want to stop short of the ragged edge. It would really suck to pop the built motor before it can be really pushed.

JSur · 03-29-2018, 09:24 AM

Quote:

Originally Posted by Chuck33079

Yeah, but you get better gas in Florida. I'm sure there's 600 in it, but if the plan is to later add fuel and really put that built motor to use, he might want to stop short of the ragged edge. It would really suck to pop the built motor before it can be really pushed.

You’re right. What he can hit vs what he should run are two different things lol. Gas down here ain’t bad. Most stations have 93, and E85 is gaining popularity as they build more pumps. But definitely better to tune it down to a safe number. I’ve had no issues at all where I’m at and I got tuned back in October, drove it all the way to North Carolina and back less then 12hrs after.

Sent from my iPhone using Tapatalk

Boosted Performance · 03-29-2018, 11:06 AM

Those tiny .48 a/r turbines will hold you back. With a built block you should have opted for the .63's for sure.

Your will see your torque climb hard and fast, and your HP will taper off quickly after 6k rpm when you start ramping up the boost.

Jayhovah · 03-29-2018, 11:49 AM

Quote:

Originally Posted by JSur

I have a stock motor, same fuel pump and 600cc injectors. Made 550whp with no knocks. Only 10.7 lbs of boost. You should definitely be able reach 600whp, or close to it on your setup. Posting vids!?!

Sent from my iPhone using Tapatalk

His built block has lower compression than your stock block.

Spooler · 03-29-2018, 01:21 PM

Quote:

Originally Posted by JSur

I have a stock motor, same fuel pump and 600cc injectors. Made 550whp with no knocks. Only 10.7 lbs of boost. You should definitely be able reach 600whp, or close to it on your setup. Posting vids!?!

Sent from my iPhone using Tapatalk

He won't make that, he lowered the compression from 11:1 to 9.5:1. This will be a major hurdle to overcome.

JSur · 03-29-2018, 01:23 PM

Quote:

Originally Posted by Jayhovah

His built block has lower compression than your stock block.

Good point. I overlooked that.

Sent from my iPhone using Tapatalk

tonyHTX · 03-29-2018, 02:19 PM

Quote:

Originally Posted by Boosted Performance

Those tiny .48 a/r turbines will hold you back. With a built block you should have opted for the .63's for sure.

Your will see your torque climb hard and fast, and your HP will taper off quickly after 6k rpm when you start ramping up the boost.

Also you can add that the GT-R manifold conversion will kill the power past 6k.

braydo25 · 03-29-2018, 04:24 PM

Quote:

Originally Posted by G3RSTY7

Who built the block? Will be in for reviews of that. We had a built block blow locally during the break in period and the builder is blaming a foreign object making it into the cylinder or timing causing the piston to hit the valve (or maybe their valve stuck and was hit by piston).

A shop in Langley BC (Canada) called Independent Speed Shop - they do a ton of high hp GT-R builds and just have a lot of crazy stuff come out of there.

braydo25 · 03-29-2018, 04:44 PM

Quote:

Originally Posted by Chuck33079

Yeah, but you get better gas in Florida. I'm sure there's 600 in it, but if the plan is to later add fuel and really put that built motor to use, he might want to stop short of the ragged edge. It would really suck to pop the built motor before it can be really pushed.

I'll definitely ask the tuner to keep power a decent away from the limit, wherever he finds that may be once it's tuned in a few hours.

braydo25 · 03-29-2018, 04:46 PM

Quote:

Originally Posted by Boosted Performance

Those tiny .48 a/r turbines will hold you back. With a built block you should have opted for the .63's for sure.

Your will see your torque climb hard and fast, and your HP will taper off quickly after 6k rpm when you start ramping up the boost.

Yeah, I've thought about this - I actually didn't opt for a new turbo setup, I've just reused the original setup the car had when I bought it.

I would ideally like to push these turbos to their limit before upgrading. I'd like to hit the 700whp to 750whp mark while still maintaining the enjoyable drivability and power band this turbo setup has provided. There's very, very little lag. It was sooo fun to drive before it threw a rod.

03-29-2018, 08:18 AM	#1 (permalink)
braydo25 Base Member Join Date: Apr 2012 Location: Tacoma Posts: 67 Drives: Nismo z34 Rep Power: 13	My built TT 370z is getting tuned today... What power can I expect? Done, made 700 after upgrading full system. Last edited by braydo25; 05-05-2019 at 03:51 PM.

03-29-2018, 08:23 AM	#2 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	If I had to make a wild-* guess, you'd want to stop around 500whp. Going too much higher sounds sketchy to me with the fuel system you described. The good news is that you should be able to make a **-ton more power down the line with a bigger pump/injectors/fuel return system. jwick, Rusty and jchammond like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-29-2018, 09:10 AM	#4 (permalink)
G3RSTY7 Base Member Join Date: Aug 2017 Location: Colorado Posts: 103 Drives: Infiniti G37s 6MT Rep Power: 8	Who built the block? Will be in for reviews of that. We had a built block blow locally during the break in period and the builder is blaming a foreign object making it into the cylinder or timing causing the piston to hit the valve (or maybe their valve stuck and was hit by piston). __________________ 09 G37S RWD 6MT, Topgunz Supercharger, CJM RFS, Walbro 450, 1050x, Nismo 1.5way LSD, Ecutek FF tuned by Seb IG: G3RSTY7 MyG37.com: RickyBobby

03-29-2018, 09:14 AM	#5 (permalink)
JSur Base Member Join Date: Mar 2016 Location: Orlando Posts: 84 Drives: 2011 370z TT Rep Power: 9	My built TT 370z is getting tuned today... What power can I expect? I have a stock motor, same fuel pump and 600cc injectors. Made 550whp with no knocks. Only 10.7 lbs of boost. You should definitely be able reach 600whp, or close to it on your setup. Posting vids!?! Sent from my iPhone using Tapatalk Martijn_b likes this. Last edited by JSur; 03-29-2018 at 09:18 AM.

03-29-2018, 11:06 AM	#8 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Those tiny .48 a/r turbines will hold you back. With a built block you should have opted for the .63's for sure. Your will see your torque climb hard and fast, and your HP will taper off quickly after 6k rpm when you start ramping up the boost. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Get tuned with ECUTEK today	mousewei84	Tuning	13	05-01-2017 01:53 AM
Real Auto Dynamics built and R/T tuned built motor TT	Mr.Squeeze	Forced Induction	132	04-18-2014 07:09 PM
Motion Lab Tuned 2012 Nismo 446WHP/378WTQ Built motor w/ Vortech upgraded Stillen kit	Motion Lab	Tuning	12	03-05-2014 11:54 AM
Going from HKS Hi Power to GTM 3", what to expect?	Footloose301	Intake/Exhaust	4	09-01-2011 04:35 PM
Hopefully getting tuned with UpRev today	NYBladeZ	Tuning	42	10-01-2010 11:25 AM