Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 05-25-2024, 01:11 PM

To make right at 900whp you should only need 23psi of boost on a 10:1 compression engine. It is more critical that you have your turbo/turbo kit efficient. The higher the whp the easier it is to hurt an engine because your efficiency is not there. Cool dense air makes power. When our cars are right they just make power easy. There is no tuning trickery

gbrettin · 05-28-2024, 09:20 AM

Quote:

Originally Posted by Spooler

Well I'll be.

That engine has 100k+ of performance parts. The only thing stock about it is the block

. That being said, your turbo points are 100% correct. Drag world has been in front of that for a while. Infact, the sensor setup you have is very similar to what I see in top tier drag builds.

gbrettin · 05-28-2024, 09:23 AM

Quote:

Originally Posted by Spooler

Let me throw some numbers out here that way you will know if your turbo kit is efficient.
I am going to use 10:1 compression ratio. Your numbers will go up or down depending on the compression ratio you have. 9:1= lower whp at 17psi of boost. 11:1 = higher whp at 17psi of boost.

If you are not hitting somewhere close to these numbers you have an issue that needs to be addressed. So, stop turning up the boost to try and make it hit the whp numbers you want or you may hurt your engine.

17psi of boost, 10:1 compression ratio on pump E85
720whp

17psi of boost, 10:1 compression ratio on Ignite Red with 1/2 deg more timing.
770whp

An additional point is that boost PSI is a measure of resistance. 17psi on one car is different on another car depending on restrictions.

BTW, this isn't so much for you Spooler. Just an addendum to your thought.

gbrettin · 05-28-2024, 09:25 AM

Quote:

Originally Posted by Spooler

To make right at 900whp you should only need 23psi of boost on a 10:1 compression engine. It is more critical that you have your turbo/turbo kit efficient. The higher the whp the easier it is to hurt an engine because your efficiency is not there. Cool dense air makes power. When our cars are right they just make power easy. There is no tuning trickery

A good tuner will show you where the engine falls off and explain why instead of forcing it.

Spooler · 05-28-2024, 01:01 PM

Quote:

Originally Posted by gbrettin

A good tuner will show you where the engine falls off and explain why instead of forcing it.

I am afraid we don't have any of those on our platform. The person who tuned my car is not from the VQ community. Best kept secret there is.

SteveVQ · 05-29-2024, 06:32 PM

Quote:

Originally Posted by Spooler

When our cars have $100K+ put in them they just make power easy. There is no tuning trickery.

FIFY

Sorry bro, its the truth for this platform

Glad it's all come together and its all working for you. You've earned your results 10x over.

Spooler · 05-29-2024, 10:33 PM

Quote:

Originally Posted by SteveVQ

FIFY

Sorry bro, its the truth for this platform

Glad it's all come together and its all working for you. You've earned your results 10x over.

You have no idea. LOL This last upgrade was not cheap. Custom work costs. It is right this time. The car is amazing. We all wish we had the cookie cutter upgrades to make the power like other models and be reliable. Do this to get that whp type deal. Nobody makes a turbo kit that can make 1000whp without some serious modifications. Some kits you just sell and start over. I am happy with my car. At the end of the day that is all that matters.

Spooler · 06-08-2024, 11:42 PM

Life has me busy right now. I will get to tuning my car in one day. It will just have to wait. I have other more important things to deal with right now.

Spooler · 06-14-2024, 12:36 PM

Quote:
Originally Posted by isayimandrew View Post
If I'm not mistaken, the CSS solution does prevent head lift up to a certain point but for anyone making huge amounts of power the issue pops back up. I am running that exact set up and under 800 whp so its not an issue for me. I think Spooler mentioned going over 800 whp is where head lift becomes an issue.

That's right. If you use a quality MLS and head studs with the CSS it should hold at that level as long as your turbo and turbo kit are designed correctly. If you want more you have to do something to create more sealing pressure.

Examples:
Darton sleeves with step deck cut block, Quality MLS, Head studs
CSS with a copper o-ring/Quality MLS with headstuds.
CSS with Top fuel hoops, copper headgasket, Head studs.

Every one of these solutions can be broken if you don't do not size your turbos properly and do not have an optimal turbo kit. High drive pressure will take out a headgasket with the quickness. Too high of cylinder pressure to low in the rpm range will make our blocks dance. We are not able to push our blocks like other platforms can. At 800whp or above one little tuning mistake or pushing your small turbos too hard will cause major grief. You have to know when to stop turning up the boost. You will get warning signs before destruction happens. A standalone with sensors is worth it and will pay for itself. One rebuild will cost more than the cost of a standalone.

Spooler · 06-19-2024, 12:40 AM

Welp, we can all add Vulcan Cut Ring headgaskets for the VQ. CSS is selling them now.

Spooler · 06-19-2024, 12:49 AM

Finally, I have some time for myself. I have a ton more traction than ever before. Time to kick this pig and see where I am. I hope the weather holds.

Spooler · 06-21-2024, 10:41 PM

Changed the oil today and did a once over to check everything. Drained my catch cans and only water came out. The car is ready to go but the dang rain started today. Crapola!!

gbrettin · 06-27-2024, 10:42 AM

Any updates with getting some runs in?

Spooler · 06-27-2024, 09:10 PM

Quote:

Originally Posted by gbrettin

Any updates with getting some runs in?

Noop. It's that time of the year. I am happy to be getting rain finally. It was dry as a bone. The high's have been 98 to 100deg with high humidity. I see no need to stress the motor that much for nothing.

Optimiser · 07-06-2024, 11:12 AM

Interesting video of Australian built drag racing inline 6 engines.

https://www.youtube.com/watch?v=pKsg5EbTVvY

05-25-2024, 01:11 PM	#5551 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	To make right at 900whp you should only need 23psi of boost on a 10:1 compression engine. It is more critical that you have your turbo/turbo kit efficient. The higher the whp the easier it is to hurt an engine because your efficiency is not there. Cool dense air makes power. When our cars are right they just make power easy. There is no tuning trickery gbrettin likes this. Last edited by Spooler; 05-25-2024 at 01:33 PM.

06-19-2024, 12:40 AM	#5560 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Welp, we can all add Vulcan Cut Ring headgaskets for the VQ. CSS is selling them now. redondoaveb likes this.

06-19-2024, 12:49 AM	#5561 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Finally, I have some time for myself. I have a ton more traction than ever before. Time to kick this pig and see where I am. I hope the weather holds. phunk and redondoaveb like this.

06-21-2024, 10:41 PM	#5562 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Changed the oil today and did a once over to check everything. Drained my catch cans and only water came out. The car is ready to go but the dang rain started today. Crapola!! gbrettin and redondoaveb like this. Last edited by Spooler; 06-22-2024 at 02:26 AM.

06-27-2024, 10:42 AM	#5563 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,284 Drives: Tricycle Rep Power: 589151	Any updates with getting some runs in? redondoaveb likes this.

06-08-2024, 11:42 PM	#5558 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Life has me busy right now. I will get to tuning my car in one day. It will just have to wait. I have other more important things to deal with right now.

06-14-2024, 12:36 PM	#5559 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Quote: Originally Posted by isayimandrew View Post If I'm not mistaken, the CSS solution does prevent head lift up to a certain point but for anyone making huge amounts of power the issue pops back up. I am running that exact set up and under 800 whp so its not an issue for me. I think Spooler mentioned going over 800 whp is where head lift becomes an issue. That's right. If you use a quality MLS and head studs with the CSS it should hold at that level as long as your turbo and turbo kit are designed correctly. If you want more you have to do something to create more sealing pressure. Examples: Darton sleeves with step deck cut block, Quality MLS, Head studs CSS with a copper o-ring/Quality MLS with headstuds. CSS with Top fuel hoops, copper headgasket, Head studs. Every one of these solutions can be broken if you don't do not size your turbos properly and do not have an optimal turbo kit. High drive pressure will take out a headgasket with the quickness. Too high of cylinder pressure to low in the rpm range will make our blocks dance. We are not able to push our blocks like other platforms can. At 800whp or above one little tuning mistake or pushing your small turbos too hard will cause major grief. You have to know when to stop turning up the boost. You will get warning signs before destruction happens. A standalone with sensors is worth it and will pay for itself. One rebuild will cost more than the cost of a standalone.

07-06-2024, 11:12 AM	#5565 (permalink)
Optimiser Enthusiast Member Join Date: Mar 2013 Location: Australia Posts: 455 Drives: 2012 Nissan 370Z MT Rep Power: 20144	Interesting video of Australian built drag racing inline 6 engines. https://www.youtube.com/watch?v=pKsg5EbTVvY Last edited by Optimiser; 07-06-2024 at 11:59 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM