Fast Intentions Stage 2 TT build by MA-Motorsports.

cv129 · 07-13-2022, 11:38 AM

This has been rather unfortunate series of events for you, sucks that it happens to someone that did this much research and hired only the most knowledgeable hands.

Best of luck, hope you can finally get to your goal sooner than later.

Spooler · 07-13-2022, 12:02 PM

Quote:

Originally Posted by cv129

This has been rather unfortunate series of events for you, sucks that it happens to someone that did this much research and hired only the most knowledgeable hands.

Best of luck, hope you can finally get to your goal sooner than later.

Chit happens. Moving on. I wouldn't have posted but a few folks suggested I let the cat out of the bag. Well, the day finally came that I had enough.

Spooler · 07-15-2022, 05:05 PM

Enjoy some funk while you wait.

Spooler · 07-15-2022, 05:06 PM

Just in case you run low.

Spooler · 07-19-2022, 09:35 PM

Parts gathering is still on going. You will just have to wait and see.

BOLIO 671 · 08-02-2022, 10:11 PM

Sad to hear all these issues you had with SOHO man. From my personal experience they don't really have the best Customer Service. I too was on the fence between Mazworx and their product and even after being a former customer of SOHO on other products, they immediately cease contact or any justification to continue dialogue with me after I told them I was leaning towards going with Mazworx. They didn't even take the time to justify to me why going with them would be better or what made their product superior.

I've been on the fence about their intake manifold as their dyno sheets don't show a huge difference in power gains for the amount of money you have to pay for that specific part. After reading your thread and review, it has solidified by thoughts about their intake manifold.

Spooler · 08-02-2022, 10:13 PM

Quote:

Originally Posted by BOLIO 671

Sad to hear all these issues you had with SOHO man. From my personal experience they don't really have the best Customer Service. I too was on the fence between Mazworx and their product and even after being a former customer of SOHO on other products, they immediately cease contact or any justification to continue dialogue with me after I told them I was leaning towards going with Mazworx. They didn't even take the time to justify to me why going with them would be better or what made their product superior.

I've been on the fence about their intake manifold as their dyno sheets don't show a huge difference in power gains for the amount of money you have to pay for that specific part. After reading your thread and review, it has solidified by thoughts about their intake manifold.

If you are going to turn the boost up to 20psi + you will need something eventually. As far as your experience, some of that stuff is coming to light now.

Spooler · 08-02-2022, 11:30 PM

Quote:

Originally Posted by BOLIO 671

Sad to hear all these issues you had with SOHO man. From my personal experience they don't really have the best Customer Service. I too was on the fence between Mazworx and their product and even after being a former customer of SOHO on other products, they immediately cease contact or any justification to continue dialogue with me after I told them I was leaning towards going with Mazworx. They didn't even take the time to justify to me why going with them would be better or what made their product superior.

I've been on the fence about their intake manifold as their dyno sheets don't show a huge difference in power gains for the amount of money you have to pay for that specific part. After reading your thread and review, it has solidified by thoughts about their intake manifold.

I do wish you would have told me this before I took my car to SOHO. I would have known it was a bad idea.

BOLIO 671 · 08-03-2022, 10:51 PM

I actually experienced this issue with the motor while I was on the fence shopping around and didn't know you went to SOHO until you were already there. I also didn't put everything together until they completely ceased communications with me when I told them I was leaning towards Mazworx. If its one of those "If I only knew then" sort of things.

I was also not sure If i was just reading into things. I actually reached out to redondoaveb when I was experiencing long delays and communications fall from them when I ordered by Catch-Can/Coolant reservoir and he shared his experience with me regarding the issue he had about the pressurized vs non-pressurized option he went through with them.

Spooler · 08-03-2022, 11:29 PM

Quote:

Originally Posted by BOLIO 671

I actually experienced this issue with the motor while I was on the fence shopping around and didn't know you went to SOHO until you were already there. I also didn't put everything together until they completely ceased communications with me when I told them I was leaning towards Mazworx. If its one of those "If I only knew then" sort of things.

I was also not sure If i was just reading into things. I actually reached out to redondoaveb when I was experiencing long delays and communications fall from them when I ordered by Catch-Can/Coolant reservoir and he shared his experience with me regarding the issue he had about the pressurized vs non-pressurized option he went through with them.

It's all good. Now we know. It's not your fault by any means.

Spooler · 08-16-2022, 10:53 PM

Progress is being made on my new Intake.

Spooler · 08-19-2022, 11:05 AM

Welp, the 2nd intake Phunk is making along with mine is also sold. LOL

Spooler · 08-22-2022, 05:55 PM

Everything may be for sale. If you want dibs on something. Let me know.

JARblue · 08-22-2022, 06:18 PM

Quote:

Originally Posted by Spooler

Everything may be for sale. If you want dibs on something. Let me know.

Dibs!

Spooler · 08-22-2022, 06:20 PM

Unless I get a billet block made a VR38 swap it will be. Or, I will just turn it down to 800whp.

07-13-2022, 11:38 AM	#5071 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,237 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	This has been rather unfortunate series of events for you, sucks that it happens to someone that did this much research and hired only the most knowledgeable hands. Best of luck, hope you can finally get to your goal sooner than later. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

07-15-2022, 05:05 PM	#5073 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Enjoy some funk while you wait. JARblue likes this.

07-19-2022, 09:35 PM	#5075 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Parts gathering is still on going. You will just have to wait and see. phunk, JARblue, Rusty and 2 others like this.

08-02-2022, 10:11 PM	#5076 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Sad to hear all these issues you had with SOHO man. From my personal experience they don't really have the best Customer Service. I too was on the fence between Mazworx and their product and even after being a former customer of SOHO on other products, they immediately cease contact or any justification to continue dialogue with me after I told them I was leaning towards going with Mazworx. They didn't even take the time to justify to me why going with them would be better or what made their product superior. I've been on the fence about their intake manifold as their dyno sheets don't show a huge difference in power gains for the amount of money you have to pay for that specific part. After reading your thread and review, it has solidified by thoughts about their intake manifold. JARblue, Rusty, Spooler and 2 others like this. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

08-03-2022, 10:51 PM	#5079 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	I actually experienced this issue with the motor while I was on the fence shopping around and didn't know you went to SOHO until you were already there. I also didn't put everything together until they completely ceased communications with me when I told them I was leaning towards Mazworx. If its one of those "If I only knew then" sort of things. I was also not sure If i was just reading into things. I actually reached out to redondoaveb when I was experiencing long delays and communications fall from them when I ordered by Catch-Can/Coolant reservoir and he shared his experience with me regarding the issue he had about the pressurized vs non-pressurized option he went through with them. JARblue, Rusty, Spooler and 1 others like this. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

07-15-2022, 05:06 PM	#5074 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Just in case you run low.

08-16-2022, 10:53 PM	#5081 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Progress is being made on my new Intake. Rusty, redondoaveb and BettyZ like this.

08-19-2022, 11:05 AM	#5082 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Welp, the 2nd intake Phunk is making along with mine is also sold. LOL Rusty and redondoaveb like this.

08-22-2022, 05:55 PM	#5083 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Everything may be for sale. If you want dibs on something. Let me know.

08-22-2022, 06:20 PM	#5085 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Unless I get a billet block made a VR38 swap it will be. Or, I will just turn it down to 800whp.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM