Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 11-22-2021, 10:20 AM

Drove the car yesterday. The O2 code came back. The bad part is when Dylan was installing the pressure sensor water poured out of my engine harness inside the car. When I saw it my heart sank. He sealed the grommet back up. I wonder if that has caused me some issues. Ugg, something else to fix. I may have to get a whole new engine harness. F' me...

Ghostvette · 11-22-2021, 10:59 AM

Quote:

Originally Posted by Spooler

Drove the car yesterday. The O2 code came back. The bad part is when Dylan was installing the pressure sensor water poured out of my engine harness inside the car. When I saw it my heart sank. He sealed the grommet back up. I wonder if that has caused me some issues. Ugg, something else to fix. I may have to get a whole new engine harness. F' me...

Coolant or just plain water?

Spooler · 11-22-2021, 11:40 AM

Quote:

Originally Posted by Ghostvette

Coolant or just plain water?

Water, I had washed the car the day before I went. Came from under the cowl panel and got past the rubber grommet seal into the car.

Spooler · 11-22-2021, 11:46 AM

It is that or either the head lifted on bank 1 and it is getting worse. I did see a coolant trail on the O2 that I took out. This is going to limit my driving for sure. Better be safe than sorry.

Spooler · 11-22-2021, 11:54 AM

It's all good. It is not too much longer before it goes back under the knife in February.

Spooler · 11-22-2021, 06:56 PM

You guys have to see this.

DaveZ03 · 11-23-2021, 09:57 AM

Dave Grohl is the man!!

Spooler · 11-23-2021, 11:08 AM

Quote:

Originally Posted by DaveZ03

Dave Grohl is the man!!

I caught an interview with him once on why he does it. He said when he was young he always dreamed of being invited on the stage the same way he invites folks to come up today. It gives him great joy especially when they rock the house.

DaveZ03 · 11-23-2021, 02:01 PM

Quote:

Originally Posted by Spooler

I caught an interview with him once on why he does it. He said when he was young he always dreamed of being invited on the stage the same way he invites folks to come up today. It gives him great joy especially when they rock the house.

This is why I will pay front row ticket prices for Foo Fighters shows. Not for the chance to get on stage, but because of him. He comes across as a very genuine, down to earth guy, even though he is easily one of the biggest rock stars on the planet!

Spooler · 11-24-2021, 10:13 AM

Quote:

Originally Posted by Spooler

This is on a Dyno Dynamics. It reads 15% lower than a dyno jet. Verified it with my car comparing MA's dyno and then put my car on a dynojet to see what happened.

[IMG]

Moses Dyno by Spoooler, on Flickr[/IMG]

These turbo's keep looking better and better. Ugg, the unknown is just tough trying to figure out.

Mr.Squeeze · 11-24-2021, 10:51 AM

Quote:

Originally Posted by Spooler

These turbo's keep looking better and better. Ugg, the unknown is just tough trying to figure out.

Man I don't know why you keep spinning in circles with those turbos. There the right ones they will flow enough air. Don't even need a compressor map to figure that out the compressor wheel and turbine combo is good enough.

Sent from my SM-G986U using Tapatalk

Spooler · 11-24-2021, 11:25 AM

Quote:

Originally Posted by Mr.Squeeze

Man I don't know why you keep spinning in circles with those turbos. There the right ones they will flow enough air. Don't even need a compressor map to figure that out the compressor wheel and turbine combo is good enough.

Sent from my SM-G986U using Tapatalk

Cause I keep going in circles until I think about it enough. I just looked at a Carbon Z post on Instagram. Looks like the response is good. Like I have said, I am very picky when it comes to turbos.

Spooler · 11-24-2021, 11:38 AM

I research chit like crazy. I can't help myself. Sometimes I get it right first try, sometimes I don't.

Spooler · 11-24-2021, 12:15 PM

The other thing is, If I get it wrong, the motor has to come back out to switch turbo's. That is the only sucky part about a Fast Intentions turbo kit. Doing development work is not cheap at all. I would rather chase my tail for a couple of months before I make a decision on what to do. I got time.

redondoaveb · 11-24-2021, 12:16 PM

What's the difference between the 61.64's and the 65.64's?

11-22-2021, 10:20 AM	#4861 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	Drove the car yesterday. The O2 code came back. The bad part is when Dylan was installing the pressure sensor water poured out of my engine harness inside the car. When I saw it my heart sank. He sealed the grommet back up. I wonder if that has caused me some issues. Ugg, something else to fix. I may have to get a whole new engine harness. F' me... FL 4Motion likes this.

11-22-2021, 11:46 AM	#4864 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	It is that or either the head lifted on bank 1 and it is getting worse. I did see a coolant trail on the O2 that I took out. This is going to limit my driving for sure. Better be safe than sorry. FL 4Motion likes this.

11-22-2021, 11:54 AM	#4865 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	It's all good. It is not too much longer before it goes back under the knife in February. FL 4Motion, JARblue, Rusty and 1 others like this.

11-22-2021, 06:56 PM	#4866 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	You guys have to see this. DaveZ03 likes this.

11-23-2021, 09:57 AM	#4867 (permalink)
DaveZ03 Base Member Join Date: Feb 2019 Location: Kentucky Posts: 217 Drives: '11 FairladyZ Rep Power: 51859	Dave Grohl is the man!! Spooler likes this.

11-24-2021, 11:38 AM	#4873 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	I research chit like crazy. I can't help myself. Sometimes I get it right first try, sometimes I don't. FL 4Motion likes this.

11-24-2021, 12:15 PM	#4874 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	The other thing is, If I get it wrong, the motor has to come back out to switch turbo's. That is the only sucky part about a Fast Intentions turbo kit. Doing development work is not cheap at all. I would rather chase my tail for a couple of months before I make a decision on what to do. I got time.

11-24-2021, 12:16 PM	#4875 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,360 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	What's the difference between the 61.64's and the 65.64's? __________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM