Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 10-10-2021, 10:59 PM

Quote:

Originally Posted by redondoaveb

But if you're pushing coolant, a pressure test will tell you where it's coming from unless you're positive it was just the overflow.

That I am positive of.

redondoaveb · 10-10-2021, 11:06 PM

Quote:

Originally Posted by Spooler

That I am positive of.

So are you thinking the motor isn't hurt?

Spooler · 10-10-2021, 11:54 PM

Quote:

Originally Posted by redondoaveb

So are you thinking the motor isn't hurt?

I got a good chance it is not hurt. If so, I will be luckiest dude around. I have to go through a bunch of testing to figure it out.

redondoaveb · 10-11-2021, 12:00 AM

Quote:

Originally Posted by Spooler

I got a good chance it is not hurt. If so, I will be luckiest dude around....

If it was just puking coolant out of the overflow, what makes you think it could possibly be hurt?

Spooler · 10-11-2021, 12:19 AM

Quote:

Originally Posted by redondoaveb

If it was just puking coolant out of the overflow, what makes you think it could possibly be hurt?

I ran it hot. I am trying to figure out exactly why it puked coolant out the reservoir. Was it because I was on a banked track and all the fluid was on the side of the coolant reservoir that had the overflow tube? Whatever coolant expanded into the tank was lost on the banked track? It is possible. If so, I will need to go back to the 2012 and newer Nissan coolant tank. That means I have to redo my catch can setup also which is going to suck but it is way better than yanking a motor, etc.

redondoaveb · 10-11-2021, 12:32 AM

Quote:

Originally Posted by Spooler

I ran it hot. I am trying to figure out exactly why it puked coolant out the reservoir. Was it because I was on a banked track and all the fluid was on the side of the coolant reservoir that had the overflow tube? Whatever coolant expanded into the tank was lost on the banked track? It is possible. If so, I will need to go back to the 2012 and newer Nissan coolant tank. That means I have to redo my catch can setup also which is going to suck but it is way better than yanking a motor, etc.

You're running the SOHO non pressurized set up right now? That's what I'm running

Spooler · 10-11-2021, 12:33 AM

Quote:

Originally Posted by redondoaveb

You're running the SOHO non pressurized set up right now? That's what I'm running

Yes, SOHO just put it on for me.

Spooler · 10-11-2021, 12:37 AM

Turn 1 at Pocono has a 14 deg banking.

Spooler · 10-11-2021, 12:43 AM

As soon as I can get the coolant pressure gauge in I will know.

redondoaveb · 10-11-2021, 01:22 AM

Quote:

Originally Posted by Spooler

Yes, SOHO just put it on for me.

They used to sell a pressurized set up but I guess they discontinued it

DrBacon · 10-11-2021, 02:13 AM

Quote:

Originally Posted by redondoaveb

They used to sell a pressurized set up but I guess they discontinued it

Seems so, I just glanced as well and now there's no option for it anymore. So not only did they drastically raise the price but now only sells the simpler option. Bit silly. Wonder what they do with that extra coolant line then? Just have people cap it off some how?

Cars_go_vroom · 10-11-2021, 02:40 AM

Quote:

Originally Posted by cv129

I txt'd Tay for details but he didn't spill the beans haha. Rightfully so though.

What details? The car build?

Hotrodz · 10-11-2021, 10:28 AM

My car did this many years ago at a track event. At first glance the verdict was a lifted head. I did a cylinder pressure test and smoke test. Everything was fine. There was no oil in my radiator or coolant. I took it to Seb and he redid all the test and everything was fine. He found an air pocket in the coolant line he drained the whole system a refilled it. He refilled the system with the front end elevated to make sure all the air came out. I ran fine for the next couple of years without incident.

Sent from my SM-G965U using Tapatalk

Nik@SOHO · 10-11-2021, 10:40 AM

Quote:

Originally Posted by Spooler

As soon as I can get the coolant pressure gauge in I will know.

If you wanted to bring the car here I would install a coolant pressure gauge of choice and also help wiring it in to the ecutek to log for you as well with no cost associated with it

Mr.Squeeze · 10-11-2021, 11:29 AM

Quote:

Originally Posted by Nik@SOHO

If you wanted to bring the car here I would install a coolant pressure gauge of choice and also help wiring it in to the ecutek to log for you as well with no cost associated with it

Now this is great customer service

Sent from my SM-G986U using Tapatalk

10-11-2021, 10:28 AM	#4528 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	My car did this many years ago at a track event. At first glance the verdict was a lifted head. I did a cylinder pressure test and smoke test. Everything was fine. There was no oil in my radiator or coolant. I took it to Seb and he redid all the test and everything was fine. He found an air pocket in the coolant line he drained the whole system a refilled it. He refilled the system with the front end elevated to make sure all the air came out. I ran fine for the next couple of years without incident. Sent from my SM-G965U using Tapatalk FL 4Motion, BOLIO 671, JARblue and 3 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM

10-11-2021, 12:37 AM	#4523 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	Turn 1 at Pocono has a 14 deg banking.

10-11-2021, 12:43 AM	#4524 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	As soon as I can get the coolant pressure gauge in I will know.