Fast Intentions Stage 2 TT build by MA-Motorsports.

redondoaveb · 07-09-2021, 08:15 PM

Spooler · 07-09-2021, 10:29 PM

Is that ice bags sitting in the middle of the intake??? Well Rusty, I think you got your answer. NO

Spooler · 07-09-2021, 10:45 PM

This build can be yours for only $19.95.

Spooler · 07-10-2021, 02:37 AM

^^^^^ But wait, since it is Saturday, you will get a free set of Ginsu knives.

Spooler · 07-10-2021, 03:23 PM

Quote:

Originally Posted by phunk

I didnt take any videos when he made 1050 or 1060 or whichever it was maxing out his turbos. We had some videos when it was mid 900s.

His car had our 4.5" bell core, just with custom top end tanks to work with the intake manifold.

I found a video and the dyno charts on Instagram. On his justinbwell username.

Spooler · 07-13-2021, 11:42 AM

I wish I would have drilled/tapped the exhaust manifolds so I could check drive pressures on each turbo. I feel like I am flying blind trying to figure out where the turbo's are maxing out and if backpressure is becoming an issue. One mistake in this area can cost me a headgasket. Ideally you want no more than a 1:1 ratio. 30psi of boost/30 psi of drive pressure. This will tell you where the turbo's exhaust side is becoming a restriction. The only problem is this may cause the exhaust manifold to crack unless they were cast with a bung area to install it.

redondoaveb · 07-13-2021, 12:19 PM

Quote:

Originally Posted by Spooler

I wish I would have drilled/tapped the exhaust manifolds so I could check drive pressures on each turbo. I feel like I am flying blind trying to figure out where the turbo's are maxing out and if backpressure is becoming an issue. One mistake in this area can cost me a headgasket. Ideally you want no more than a 1:1 ratio. 30psi of boost/30 psi of drive pressure. This will tell you where the turbo's exhaust side is becoming a restriction. The only problem is this may cause the exhaust manifold to crack unless they were cast with a bung area to install it.

That's something FI could easily add during production and ship with plugs for the guys that won't utilize them

Spooler · 07-13-2021, 12:30 PM

Quote:

Originally Posted by redondoaveb

That's something FI could easily add during production and ship with plugs for the guys that won't utilize them

They would just need to cast a spot into the manifold. If you want it, you can drill and tap it to add it. For tubular manifolds it is not uncommon to see EGT ports on each runner for tuning purposes. All cylinders are not equal and a EGT gauge on each runner will give the tuner an idea of how much work it is doing so they can balance the cylinders out in the tune. To measure back pressure all that is needed is to weld on bung on for it. I don't see it as something FI would do for so few people that would use it. I would be better off to switch to the CJ motorsports tubular exhaust manifolds. I don't think I am going to go that far. I am about at the end of my road and I am happy with my car. At some point I will draw a line in the sand and say I am done. Did that with my truck too and have enjoyed it for many years.

Spooler · 07-13-2021, 12:41 PM

I did stop by my local E85 station the other day. They have been out of pump E85 for a month and a half. No driver to bring it to them. I am happy to be working from home still and not having to worry about that. Only one station around is very frustrating.
They constantly run out.

Hotrodz · 07-13-2021, 12:42 PM

Quote:

Originally Posted by Spooler

They would just need to cast a spot into the manifold. If you want it, you can drill and tap it to add it. For tubular manifolds it is not uncommon to see EGT ports on each runner for tuning purposes. All cylinders are not equal and a EGT gauge on each runner will give the tuner an idea of how much work it is doing so they can balance the cylinders out in the tune. To measure back pressure all that is needed is to weld on bung on for it. I don't see it as something FI would do for so few people that would use it. I would be better off to switch to the CJ motorsports tubular exhaust manifolds. I don't think I am going to go that far. I am about at the end of my road and I am happy with my car. At some point I will draw a line in the sand and say I am done. Did that with my truck too and have enjoyed it for many years.

The great thing about drawing a line in the sand is you can cover it up and draw another line anytime you want! Just saying!!!

Time to go have fun!!!

Sent from my SM-G965U using Tapatalk

Spooler · 07-13-2021, 12:43 PM

Quote:

Originally Posted by Hotrodz

Time to go have fun!!!

Sent from my SM-G965U using Tapatalk

This ^^^^^^

Spooler · 07-13-2021, 12:49 PM

I do a good job of stopping when I am ready. I will just maintain the car and only upgrade what I break. I do miss driving it every day back and forth to work. I don't always drive it like I stole it but it is there if I want to. A choice is a beautiful thing.

Spooler · 07-13-2021, 12:54 PM

The only frustrating thing about my car is keeping E85 in the tank. I wish they would build more E85 stations. I have been my own station since last year. Staying on Ignite Red is not a bad thing. It just get's expensive and since I don't drive near as much it is not too bad.

Hotrodz · 07-13-2021, 12:55 PM

Quote:

Originally Posted by Spooler

I did stop by my local E85 station the other day. They have been out of pump E85 for a month and a half. No driver to bring it to them. I am happy to be working from home still and not having to worry about that. Only one station around is very frustrating.
They constantly run out.

You should Google Sunoco racing fuel for a distributor near you. Their e85r is always e85 and the price for delivery to your door may not be to bad. It may also be easy for you to go to the distribution site and puck it up your self.

I get it delivered to my garage door for less than $5 per gallon! My house is about 110 miles from the distributor.

Sent from my SM-G965U using Tapatalk

Spooler · 07-13-2021, 12:58 PM

Quote:

Originally Posted by Hotrodz

You should Google Sunoco racing fuel for a distributor near you. Their e85r is always e85 and the price for delivery to your door may not be to bad. It may also be easy for you to go to the distribution site and puck it up your self.

I get it delivered to my garage door for less than $5 per gallon! My house is about 110 miles from the distributor.

Sent from my SM-G965U using Tapatalk

My distributor lives in Swansee, SC. LOL It is not too bad of a drive.

07-09-2021, 08:15 PM	#3991 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,361 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	__________________ Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo 700+whp

07-09-2021, 10:29 PM	#3992 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,804 Drives: 2013 Nismo 370z Rep Power: 2684392	Is that ice bags sitting in the middle of the intake??? Well Rusty, I think you got your answer. NO JARblue and Rusty like this. Last edited by Spooler; 07-09-2021 at 10:57 PM.

07-09-2021, 10:45 PM	#3993 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,804 Drives: 2013 Nismo 370z Rep Power: 2684392	This build can be yours for only $19.95. JARblue, Rusty and old guy like this.

07-10-2021, 02:37 AM	#3994 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,804 Drives: 2013 Nismo 370z Rep Power: 2684392	^^^^^ But wait, since it is Saturday, you will get a free set of Ginsu knives. JARblue and old guy like this.

07-13-2021, 11:42 AM	#3996 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,804 Drives: 2013 Nismo 370z Rep Power: 2684392	I wish I would have drilled/tapped the exhaust manifolds so I could check drive pressures on each turbo. I feel like I am flying blind trying to figure out where the turbo's are maxing out and if backpressure is becoming an issue. One mistake in this area can cost me a headgasket. Ideally you want no more than a 1:1 ratio. 30psi of boost/30 psi of drive pressure. This will tell you where the turbo's exhaust side is becoming a restriction. The only problem is this may cause the exhaust manifold to crack unless they were cast with a bung area to install it. FL 4Motion, Rusty, Hotrodz and 3 others like this. Last edited by Spooler; 07-13-2021 at 11:45 AM.

07-13-2021, 12:41 PM	#3999 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,804 Drives: 2013 Nismo 370z Rep Power: 2684392	I did stop by my local E85 station the other day. They have been out of pump E85 for a month and a half. No driver to bring it to them. I am happy to be working from home still and not having to worry about that. Only one station around is very frustrating. They constantly run out. Hotrodz, Ghostvette and redondoaveb like this.

07-13-2021, 12:49 PM	#4002 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,804 Drives: 2013 Nismo 370z Rep Power: 2684392	I do a good job of stopping when I am ready. I will just maintain the car and only upgrade what I break. I do miss driving it every day back and forth to work. I don't always drive it like I stole it but it is there if I want to. A choice is a beautiful thing. FL 4Motion, Mr.Squeeze, Hotrodz and 1 others like this.

07-13-2021, 12:54 PM	#4003 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,804 Drives: 2013 Nismo 370z Rep Power: 2684392	The only frustrating thing about my car is keeping E85 in the tank. I wish they would build more E85 stations. I have been my own station since last year. Staying on Ignite Red is not a bad thing. It just get's expensive and since I don't drive near as much it is not too bad. redondoaveb likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM