Fast Intentions Stage 2 TT build by MA-Motorsports.

solidus · 02-02-2021, 01:01 PM

Quote:

Originally Posted by Spooler

Weld Wheels 6.5 in backspacing with High Hat. 17x10.5 will clear the Akebono's. You only need them for the rear. You will also need a hub ring for both sides to prevent from breaking your wheel studs. Solidus already bought my spec and put them on his car. They work like a champ. Only run them when your serious. 1/2 mile racing, etc. MT Street R Radial, size 305/45/17.

My backspacing is 6.7, I had to give Ryan the reciept so the people would believe it.

solidus · 02-02-2021, 01:04 PM

Diabel with his build awhile back had said at his peak of 77X?rwhp that felt like the limit of traction for the street. Derek, me and you saw that on our "Day of destruction" you were good till you tried that 25psi. What I need now is to score a set of DSS axles then I'm done. I have an odd feeling as soon as I get my new clutch in , I'm gonna twist up the stocks.

Spooler · 02-02-2021, 01:53 PM

Quote:

Originally Posted by solidus

My backspacing is 6.7, I had to give Ryan the reciept so the people would believe it.

Your gonna make me go back and check my data.... Damnit.

GeauxTigers1 · 02-04-2021, 02:19 AM

Quote:

Originally Posted by solidus

Diabel with his build awhile back had said at his peak of 77X?rwhp that felt like the limit of traction for the street. Derek, me and you saw that on our "Day of destruction" you were good till you tried that 25psi. What I need now is to score a set of DSS axles then I'm done. I have an odd feeling as soon as I get my new clutch in , I'm gonna twist up the stocks.

dude check out sohos setup. They still twisted the UV joints on the Dss. Soho has an axle, Driveshaft combo from the gods

GeauxTigers1 · 02-04-2021, 02:23 AM

Quote:

Originally Posted by Spooler

Weld Wheels 6.5 in backspacing with High Hat. 17x10.5 will clear the Akebono's. You only need them for the rear. You will also need a hub ring for both sides to prevent from breaking your wheel studs. Solidus already bought my spec and put them on his car. They work like a champ. Only run them when your serious. 1/2 mile racing, etc. MT Street R Radial, size 305/45/17.

I feel like there's more to it than just the backspacing and high pad tho. I've only been looking at Al Tomlinsons specs he ordered that I know will fit. It's too freaking expensive to be wrong and go to put them on, only not to clear. Really don't want any spacers. Is that really all we need or isn't there other measurements to consider? offset will make a big difference too. I want to go 17x10.5 or 17x11.

Spooler · 02-04-2021, 08:50 AM

Quote:

Originally Posted by GeauxTigers1

I feel like there's more to it than just the backspacing and high pad tho. I've only been looking at Al Tomlinsons specs he ordered that I know will fit. It's too freaking expensive to be wrong and go to put them on, only not to clear. Really don't want any spacers. Is that really all we need or isn't there other measurements to consider? offset will make a big difference too. I want to go 17x10.5 or 17x11.

I gave Al the specs. I haven't had a chance to go back and look. You can only do the 17x10.5. That is all you need for the 305/17/45 tire.

Spooler · 02-04-2021, 08:51 AM

Quote:

Originally Posted by GeauxTigers1

dude check out sohos setup. They still twisted the UV joints on the Dss. Soho has an axle, Driveshaft combo from the gods

You can order them straight from DSS. They are custom axles. JCHammond has the specs.

FL 4Motion · 02-04-2021, 12:07 PM

Quote:

Originally Posted by Rusty

Everyone that I know that has done a build. At some point. They say to themselves. "What the fk am I doing?"

Yup, I posted in another thread, it’s the “dark night of the soul” moment that everyone goes through on a build at some point.

Many folks end up selling their baby after that, myself included too many times, and then we reminisce about our old cars we wish we still had. Never making that mistake again.

jchammond · 02-05-2021, 03:14 AM

Quote:

Originally Posted by Spooler

You can order them straight from DSS. They are custom axles. JCHammond has the specs.

N137 is the pt# for the one’s with 115mm outer CV’s & 108mm inners,
That’s straight through The Drive Shaft Shop in Salisbury NC

They also offer an upgraded CF driveshaft for the M/T Z’s...but mine’s an A/T, so they need my old one for accurate dimensions to make one

SeeThruHead · 02-06-2021, 10:40 PM

I linked these over in my thread but seems relevant to the conversation above, here.
no affiliation but maybe these could help with traction issues?

/shrug

Spooler · 02-08-2021, 09:07 PM

Throttle body sizing... Live now.

Spooler · 02-08-2021, 10:30 PM

So, the jest of it is to measure the boost pressure in front of the throttle body and also after the throttle body. You are looking for the pressure difference. 3/4 psi, not a big deal. 5 psi, it would be worth looking at upgrading. He also gives the math for the sizing on a N/A car.

Spooler · 02-11-2021, 07:59 PM

72 deg. today. I got a good drive in this afternoon. I had to get my boost junkie fix.

Rusty · 02-11-2021, 08:53 PM

Quote:

Originally Posted by Spooler

72 deg. today. I got a good drive in this afternoon. I had to get my boost junkie fix.

Thinking of turning mine into an ice racer. Get some skinny tires with bolts in them.

Spooler · 02-13-2021, 01:55 PM

Winters Quick change anyone....

02-02-2021, 01:04 PM	#3542 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	Diabel with his build awhile back had said at his peak of 77X?rwhp that felt like the limit of traction for the street. Derek, me and you saw that on our "Day of destruction" you were good till you tried that 25psi. What I need now is to score a set of DSS axles then I'm done. I have an odd feeling as soon as I get my new clutch in , I'm gonna twist up the stocks. JARblue, GeauxTigers1, Rusty and 3 others like this.

02-06-2021, 10:40 PM	#3550 (permalink)
SeeThruHead Track Member Join Date: Jun 2020 Location: Toronto Posts: 716 Drives: Red '18 Sport Manual Rep Power: 23498	I linked these over in my thread but seems relevant to the conversation above, here. no affiliation but maybe these could help with traction issues? /shrug Rusty likes this. __________________ My Build thread STH Build Plan Thread Images too big fix here

02-08-2021, 09:07 PM	#3551 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Throttle body sizing... Live now. SeeThruHead likes this.

02-08-2021, 10:30 PM	#3552 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	So, the jest of it is to measure the boost pressure in front of the throttle body and also after the throttle body. You are looking for the pressure difference. 3/4 psi, not a big deal. 5 psi, it would be worth looking at upgrading. He also gives the math for the sizing on a N/A car. FL 4Motion likes this.

02-11-2021, 07:59 PM	#3553 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	72 deg. today. I got a good drive in this afternoon. I had to get my boost junkie fix. FL 4Motion, Mr.Squeeze, GeauxTigers1 and 3 others like this.

02-13-2021, 01:55 PM	#3555 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Winters Quick change anyone.... FL 4Motion, gbrettin, JARblue and 4 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM