Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 09-10-2020, 04:55 PM

Elmo, is this where you posted my dyno graphs? Don't post my stuff there. I feel like I have been violated by the MyFace crowd. Dang man, I got to take a shower now.

Elmo370z · 09-10-2020, 06:57 PM

Quote:

Originally Posted by Spooler

1 Rule: No Drama

I am sorry but I was rolling after I saw that.

No f aq’s given when it comes to mike mixon

Elmo370z · 09-10-2020, 07:10 PM

Quote:

Originally Posted by Spooler

Elmo, is this where you posted my dyno graphs? Don't post my stuff there. I feel like I have been violated by the MyFace crowd. Dang man, I got to take a shower now.

No I didn’t post in that group.

Hotrodz · 09-10-2020, 08:09 PM

I saw his graph posted on Instagram. It was posted by @trackdaytherapy.

Sent from my SM-G965U using Tapatalk

Hotrodz · 09-10-2020, 08:21 PM

So things are kept in context. The closed deck thing is not the issue with head gaskets blowing. Pretty much anyone attempting to make up to 1000whp blew their head gasket. The closed deck was thought to be a panacea for that but it still did not deal with cylinder pressures like everyone thought it would. It still not a bad thing just not the right thing to deal with the issue at hand. It may not be needed in that equation but let's face it we all look for the next best thing that will get the outcome we are looking for and it is all the rage until it's not!

Well that's my story for now and if my closed deck build fails...well I will join the others in the it was fun until it went boom club!

Sent from my SM-G965U using Tapatalk

Elmo370z · 09-10-2020, 09:43 PM

Quote:

Originally Posted by Hotrodz

So things are kept in context. The closed deck thing is not the issue with head gaskets blowing. Pretty much anyone attempting to make up to 1000whp blew their head gasket. The closed deck was thought to be a panacea for that but it still did not deal with cylinder pressures like everyone thought it would. It still not a bad thing just not the right thing to deal with the issue at hand. It may not be needed in that equation but let's face it we all look for the next best thing that will get the outcome we are looking for and it is all the rage until it's not!

Well that's my story for now and if my closed deck build fails...well I will join the others in the it was fun until it went boom club!

Sent from my SM-G965U using Tapatalk

Seb put together your motor it’s not going to fail. But I’m
Curious to what he did with your heads

Spooler · 09-10-2020, 10:05 PM

Quote:

Originally Posted by Hotrodz

So things are kept in context. The closed deck thing is not the issue with head gaskets blowing. Pretty much anyone attempting to make up to 1000whp blew their head gasket. The closed deck was thought to be a panacea for that but it still did not deal with cylinder pressures like everyone thought it would. It still not a bad thing just not the right thing to deal with the issue at hand. It may not be needed in that equation but let's face it we all look for the next best thing that will get the outcome we are looking for and it is all the rage until it's not!

Well that's my story for now and if my closed deck build fails...well I will join the others in the it was fun until it went boom club!

Sent from my SM-G965U using Tapatalk

All these post I have been putting up are to help people be informed and not join the blown headgasket club. We can always keep the boost at a lower level and stay safe. That is really the big question. What level is safe. I thought I new about what that was but there is so much misinformation out there it is hard to tell. It does come down to cylinder pressure. So if you are at 11:1 compression the boost level will be much lower than someone with 9:1, 9.5:1, or 10:1. People trying to make 900hp blew their headgaskets with a closed deck block.

Spooler · 09-10-2020, 10:14 PM

By the way, the cylinders will still rock with the RJM closed deck. That has been confirmed. I am not sure about the CSS. If you call and ask JWT what to do for a high HP turbo build, they will tell you to sleeve the block.

Hotrodz · 09-10-2020, 10:52 PM

Quote:

Originally Posted by Spooler

By the way, the cylinders will still rock with the RJM closed deck. That has been confirmed. I am not sure about the CSS. If you call and ask JWT what to do for a high HP turbo build, they will tell you to sleeve the block.

That was the big disappointment with the RJM closed deck, everyone was counting on it to handle the cylinder pressure and stop the cylinder rock. It is all about next. Hell people are driving oem motor and interals with 700whp now and that was not even considered a thing a few years ago.

Sent from my SM-G965U using Tapatalk

Spooler · 09-10-2020, 11:11 PM

Quote:

Originally Posted by Hotrodz

Hell people are driving oem motor and interals with 700whp now and that was not even considered a thing a few years ago.

Sent from my SM-G965U using Tapatalk

That is because they have them de-tuned to reduce cylinder pressure so the rods will live. I wouldn't worry about your engine. Seb will know exactly what he can and can't do. He has done a ton of testing.

Spooler · 09-10-2020, 11:38 PM

As you all know Chris F. and Brian are good friends because they did Formula Drift together when Chris lived on the east coast. Everyone knows that Chris went to a VR38 engine. The reason, he went through an engine every event when he was running the VQ37HR. They tried everything to keep the heads from lifting. His next step was to Sleeve the block with Darton MID sleeves. If you go back and look at his Instagram stories he has one driving back to the pits and the engine was rattling. His statement was, "She's tired". That is exactly what it sounds like if you pop a headgasket. So I just skipped through all that experimentation and went straight to the Darton MID sleeves. I just saw no reason to do anything else.

Spooler · 09-11-2020, 12:19 AM

Back to a video.

Elmo370z · 09-11-2020, 01:00 AM

Quote:

Originally Posted by Spooler

As you all know Chris F. and Brian are good friends because they did Formula Drift together when Chris lived on the east coast. Everyone knows that Chris went to a VR38 engine. The reason, he went through an engine every event when he was running the VQ37HR. They tried everything to keep the heads from lifting. His next step was to Sleeve the block with Darton MID sleeves. If you go back and look at his Instagram stories he has one driving back to the pits and the engine was rattling. His statement was, "She's tired". That is exactly what it sounds like if you pop a headgasket. So I just skipped through all that experimentation and went straight to the Darton MID sleeves. I just saw no reason to do anything else.

https://www.facebook.com/groups/Maxi...5069977797279/

This rjm
Closed deck block “ never had any failures”

Elmo370z · 09-11-2020, 01:09 AM

https://drifting.com/this-year-amspe...ssion/drifting

Ahh found it. Failure

Spooler · 09-11-2020, 08:38 AM

Quote:

Originally Posted by Elmo370z

https://www.facebook.com/groups/Maxi...5069977797279/

This rjm
Closed deck block “ never had any failures”

LOL, I wasn't going through all that chit. NO WAY IN HELL!!!

09-10-2020, 04:55 PM	#2926 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Elmo, is this where you posted my dyno graphs? Don't post my stuff there. I feel like I have been violated by the MyFace crowd. Dang man, I got to take a shower now. Rusty likes this.

09-10-2020, 08:09 PM	#2929 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I saw his graph posted on Instagram. It was posted by @trackdaytherapy. Sent from my SM-G965U using Tapatalk Spooler and redondoaveb like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\| Last edited by Hotrodz; 09-10-2020 at 08:22 PM.*

09-10-2020, 08:21 PM	#2930 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	So things are kept in context. The closed deck thing is not the issue with head gaskets blowing. Pretty much anyone attempting to make up to 1000whp blew their head gasket. The closed deck was thought to be a panacea for that but it still did not deal with cylinder pressures like everyone thought it would. It still not a bad thing just not the right thing to deal with the issue at hand. It may not be needed in that equation but let's face it we all look for the next best thing that will get the outcome we are looking for and it is all the rage until it's not! Well that's my story for now and if my closed deck build fails...well I will join the others in the it was fun until it went boom club! Sent from my SM-G965U using Tapatalk JARblue, GeauxTigers1, Rusty and 2 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

09-10-2020, 10:14 PM	#2933 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	By the way, the cylinders will still rock with the RJM closed deck. That has been confirmed. I am not sure about the CSS. If you call and ask JWT what to do for a high HP turbo build, they will tell you to sleeve the block. JARblue and Hotrodz like this.

09-10-2020, 11:38 PM	#2936 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	As you all know Chris F. and Brian are good friends because they did Formula Drift together when Chris lived on the east coast. Everyone knows that Chris went to a VR38 engine. The reason, he went through an engine every event when he was running the VQ37HR. They tried everything to keep the heads from lifting. His next step was to Sleeve the block with Darton MID sleeves. If you go back and look at his Instagram stories he has one driving back to the pits and the engine was rattling. His statement was, "She's tired". That is exactly what it sounds like if you pop a headgasket. So I just skipped through all that experimentation and went straight to the Darton MID sleeves. I just saw no reason to do anything else. JARblue likes this. Last edited by Spooler; 09-10-2020 at 11:43 PM.

09-11-2020, 12:19 AM	#2937 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Back to a video.

09-11-2020, 01:09 AM	#2939 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	https://drifting.com/this-year-amspe...ssion/drifting Ahh found it. Failure Spooler likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM