Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 02-21-2020, 08:39 PM

Quote:

Originally Posted by redondoaveb

I still like the idea of having off boost power.

For a street car it is a big deal. For a drag car, who cares. They are WOT for the most part.

Spooler · 02-21-2020, 08:40 PM

Quote:

Originally Posted by jwick

So the head gasket let go?

Yeap, steam cut the top of one of the cylinders. I have a dead miss on one cylinder. I got it good.

jwick · 02-21-2020, 08:45 PM

Quote:

Originally Posted by Spooler

Yeap, steam cut the top of one of the cylinders. I have a dead miss on one cylinder. I got it good.

What gasket did you use?

redondoaveb · 02-21-2020, 08:49 PM

Quote:

Originally Posted by Spooler

For a street car it is a big deal. For a drag car, who cares. They are WOT for the most part.

Exactly.

Spooler · 02-21-2020, 09:03 PM

Quote:

Originally Posted by jwick

What gasket did you use?

Not sure how they built it. Doesn't matter too much, nothing is safe for long term. Everybody is having issues. SOHO has something that is working for them. They are still testing and racking up the miles on the cars. I am doing something different.

jwick · 02-21-2020, 09:04 PM

Quote:

Originally Posted by Spooler

Not sure how they built it. Doesn't matter too much, nothing is safe for long term. Everybody is having issues. SOHO has something that is working for them. They are still testing and racking up the miles on the cars. I am doing something different.

That’s the same as I’m hearing with the high power builds here. Gaskets are letting go.

Spooler · 02-21-2020, 09:07 PM

Quote:

Originally Posted by jwick

That’s the same as I’m hearing with the high power builds here. Gaskets are letting go.

I hope I can get it right this time. Time will tell.

Crazy part is very few will talk about it. LOL I just said F it. I will let folks know and post my thought process on how I am going to fix it.

jwick · 02-21-2020, 09:18 PM

Quote:

Originally Posted by Spooler

I hope I can get it right this time. Time will tell.

Crazy part is very few will talk about it. LOL I just said F it. I will let folks know and post my thought process on how I am going to fix it.

I’m sure it’s frustrating that one of the cheapest parts is causing a lot of failures. That’s just **** trailblazers have to deal with.

Here’s to you getting it right

Spooler · 02-21-2020, 09:36 PM

Quote:

Originally Posted by jwick

I’m sure it’s frustrating that one of the cheapest parts is causing a lot of failures. That’s just **** trailblazers have to deal with.

Here’s to you getting it right

Thanks Jwick, it will be Mazworx getting it right. I can say this, many people are reading this thread, vistors, members, etc. Some are calling Mazworx up and asking the same questions I did. Lots of people. I hear about it. I am just blown away because of it. It's just little old me. Blows my mind.

blueranger · 02-21-2020, 09:43 PM

Quote:

Originally Posted by Spooler

One thing I didn't have for my build was Catch cans. I think I have finally found what I was looking for. I like the SOHO catch can combo but I don't like not being able to see the coolant level and I would need to convert to a non-pressurized setup. I am leaning toward getting the Radium catch can setup. Looks like a quality kit.

I run the Radium and they are top quality.

Spooler · 02-21-2020, 11:43 PM

Quote:

Originally Posted by blueranger

I run the Radium and they are top quality.

Cool, that is what I am getting.

jchammond · 02-22-2020, 03:05 AM

Quote:

Originally Posted by Spooler

I am going to take the motor to Mazworx without the oil pump in hand. Trying to figure out when to make the trip.

EW may have a little room in his Tent, to put you up for the night

jchammond · 02-22-2020, 03:08 AM

Quote:

Originally Posted by Spooler

Thanks Jwick, it will be Mazworx getting it right. I can say this, many people are reading this thread, vistors, members, etc. Some are calling Mazworx up and asking the same questions I did. Lots of people. I hear about it. I am just blown away because of it. It's just little old me. Blows my mind.

That’s because “You’re The Bandit” & have Georgia plates to prove it

Spooler · 02-22-2020, 08:12 PM

Motor is at Mazworx.

I don't sleep in stinky fumigated tents. Don't sleep in tents since I got out of the service, matter of fact. I don't do camping. LMAO.

Spooler · 02-22-2020, 08:14 PM

Had a discussion with Mark. We are going to drop the compression down to 10:1 and let her eat. I am going to fully test it, boost pressure is going up.

02-22-2020, 08:12 PM	#2234 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Motor is at Mazworx. I don't sleep in stinky fumigated tents. Don't sleep in tents since I got out of the service, matter of fact. I don't do camping. LMAO. JARblue, Rusty, Hotrodz and 4 others like this.

02-22-2020, 08:14 PM	#2235 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Had a discussion with Mark. We are going to drop the compression down to 10:1 and let her eat. I am going to fully test it, boost pressure is going up. Mr.Squeeze, Rusty, Hotrodz and 5 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM