Fast Intentions Stage 2 TT build by MA-Motorsports.

Ghostvette · 12-03-2019, 10:29 AM

Quote:

Originally Posted by Rusty

No............I actually cork it. Build up enough pressure behind it after a while. Then shoot Spooler in the ear with it the cork.

At least it's not an EW cork.....

Spooler · 12-03-2019, 11:47 AM

New mod list to look at doing for 1/2 mile events.

1.) Upgrading to slicks, 15in or 17in. Leaning toward the 17in because I will not have to swap out rear brakes to the smaller base model brakes. Skinnies for the front.

2.) Raising my car up a little in the rear, changing rear springs, and setting camber to 0 deg. I need the car to be level at full tilt. It is lifting the front end to high at the moment. I will lower the front some too.

3.) I need motorsport grade traction control. I am upgrading to a Motec M150. I will also get boost by gear, true flat foot no lift shifting, and launch control.

4.) The input shaft on our transmissions is not going to take it. It is going to snap like a twig. So, I will be upgrading to a Hollinger Sequential. True flat foot shifting will work like a charm.

5.) I will have to retune due to the Motec. I will retune with Ignite Red. I will easily gain 60hp or more if I raise the Max boost level.

6.) I need an better intake. I will be upgrading to the CJ Motorsports billet intake and larger CAC.

7.) Installing a RPM rollbar, Recaro Halo seat, and 6 point harness.

8.) Aero, I will be installing Finite Element design front fender vents, Exhaust turndowns, and a real custom built diffuser. I may install a small splitter to balance out the aero.

9.) Since you can't do a burnout at some half mile events I will be getting tire warmers. Sticky Tires, Check....

10.) Almost forgot. I will be looking at upgrading to a OG 3.3 diff. I should be able to run 189mph in 5th.

JARblue · 12-03-2019, 01:02 PM

Going with the small changes, I see

Spooler · 12-03-2019, 01:35 PM

Quote:

Originally Posted by JARblue

Going with the small changes, I see

Just trying to help my competitors spend more money, That's all. LMAO...

Mr.Squeeze · 12-05-2019, 12:00 AM

Quote:

Originally Posted by Spooler

New mod list to look at doing for 1/2 mile events.

1.) Upgrading to slicks, 15in or 17in. Leaning toward the 17in because I will not have to swap out rear brakes to the smaller base model brakes. Skinnies for the front.

2.) Raising my car up a little in the rear, changing rear springs, and setting camber to 0 deg. I need the car to be level at full tilt. It is lifting the front end to high at the moment. I will lower the front some too.

3.) I need motorsport grade traction control. I am upgrading to a Motec M150. I will also get boost by gear, true flat foot no lift shifting, and launch control.

4.) The input shaft on our transmissions is not going to take it. It is going to snap like a twig. So, I will be upgrading to a Hollinger Sequential. True flat foot shifting will work like a charm.

5.) I will have to retune due to the Motec. I will retune with Ignite Red. I will easily gain 60hp or more if I raise the Max boost level.

6.) I need an better intake. I will be upgrading to the CJ Motorsports billet intake and larger CAC.

7.) Installing a RPM rollbar, Recaro Halo seat, and 6 point harness.

8.) Aero, I will be installing Finite Element design front fender vents, Exhaust turndowns, and a real custom built diffuser. I may install a small splitter to balance out the aero.

9.) Since you can't do a burnout at some half mile events I will be getting tire warmers. Sticky Tires, Check....

10.) Almost forgot. I will be looking at upgrading to a OG 3.3 diff. I should be able to run 189mph in 5th.

Geez not playing games I see you will love the 3.3 diff especially for 1/2 mile plus with a input shaft that won't snap

Spooler · 12-05-2019, 12:36 AM

Quote:

Originally Posted by Mr.Squeeze

Geez not playing games I see you will love the 3.3 diff especially for 1/2 mile plus with a input shaft that won't snap

How did your car turn out after your tune? Did you get it all ready to go this year?

BGTV8 · 12-05-2019, 01:42 AM

Quote:

Originally Posted by Spooler

New mod list to look at doing for 1/2 mile events.

1.) Upgrading to slicks, 15in or 17in. Leaning toward the 17in because I will not have to swap out rear brakes to the smaller base model brakes. Skinnies for the front.

2.) Raising my car up a little in the rear, changing rear springs, and setting camber to 0 deg. I need the car to be level at full tilt. It is lifting the front end to high at the moment. I will lower the front some too.

3.) I need motorsport grade traction control. I am upgrading to a Motec M150. I will also get boost by gear, true flat foot no lift shifting, and launch control.

4.) The input shaft on our transmissions is not going to take it. It is going to snap like a twig. So, I will be upgrading to a Hollinger Sequential. True flat foot shifting will work like a charm.

5.) I will have to retune due to the Motec. I will retune with Ignite Red. I will easily gain 60hp or more if I raise the Max boost level.

6.) I need an better intake. I will be upgrading to the CJ Motorsports billet intake and larger CAC.

7.) Installing a RPM rollbar, Recaro Halo seat, and 6 point harness.

8.) Aero, I will be installing Finite Element design front fender vents, Exhaust turndowns, and a real custom built diffuser. I may install a small splitter to balance out the aero.

9.) Since you can't do a burnout at some half mile events I will be getting tire warmers. Sticky Tires, Check....

10.) Almost forgot. I will be looking at upgrading to a OG 3.3 diff. I should be able to run 189mph in 5th.

Talk to me about the M150 - I have one spare with license for VitViper code package. I find myself with 2 x M150 and one can go ....

You will love the Holinger as well .... you need an RD6SS and NOT the SG3

Mr.Squeeze · 12-05-2019, 07:02 AM

Quote:

Originally Posted by Spooler

How did your car turn out after your tune? Did you get it all ready to go this year?

Broke on the dyno started smoking a lot threw the catch with high coolant temps with normal driving in the summer.This was after just pump gas tune safe to say head gasket car is on back burner for for now once again.

Spooler · 12-06-2019, 07:31 PM

Quote:

Originally Posted by Mr.Squeeze

Broke on the dyno started smoking a lot threw the catch with high coolant temps with normal driving in the summer.This was after just pump gas tune safe to say head gasket car is on back burner for for now once again.

They are not easy to build properly. Keep at it.

Spooler · 12-07-2019, 03:45 PM

I tell ya what. Seeing several people try to hit my HP level and failing is kinda an eye opener. This is no doubt making me re-consider my changes. If I get greedy, it may cost me my motor. I built/Tuned my car right on the limit of what I thought was reliable. What to do, What to do. I really like it just the way it is. I may only do some of the stuff on my list. I need more time to think about it.

Spooler · 12-07-2019, 08:18 PM

Quote:

Originally Posted by BGTV8

You will love the Holinger as well .... you need an RD6SS and NOT the SG3

What is the difference between the two? My shop can get and install one. I got the price from them. They are not cheap at all.

URBiN~HURMiT · 12-07-2019, 10:33 PM

Quote:

Originally Posted by Spooler

10.) Almost forgot. I will be looking at upgrading to a OG 3.3 diff. I should be able to run 189mph in 5th.

??? ... er, School Zones ... ???

Spooler · 12-08-2019, 12:48 AM

This video is worth posting in my thread for the folks that don't know.

Rusty · 12-08-2019, 03:17 AM

Anyone who has ever rode a motorcycle, has used a dog box.

Spooler · 12-08-2019, 01:07 PM

Quote:

Originally Posted by Spooler

What is the difference between the two? My shop can get and install one. I got the price from them. They are not cheap at all.

Ah it is the TQ they can support.

SG3:
Torque rating for endurance events is 625Nm (460ft.lb).

RD6:
Torque rating for endurance events is 880Nm (650ft.lb).

12-03-2019, 11:47 AM	#1877 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	New mod list to look at doing for 1/2 mile events. 1.) Upgrading to slicks, 15in or 17in. Leaning toward the 17in because I will not have to swap out rear brakes to the smaller base model brakes. Skinnies for the front. 2.) Raising my car up a little in the rear, changing rear springs, and setting camber to 0 deg. I need the car to be level at full tilt. It is lifting the front end to high at the moment. I will lower the front some too. 3.) I need motorsport grade traction control. I am upgrading to a Motec M150. I will also get boost by gear, true flat foot no lift shifting, and launch control. 4.) The input shaft on our transmissions is not going to take it. It is going to snap like a twig. So, I will be upgrading to a Hollinger Sequential. True flat foot shifting will work like a charm. 5.) I will have to retune due to the Motec. I will retune with Ignite Red. I will easily gain 60hp or more if I raise the Max boost level. 6.) I need an better intake. I will be upgrading to the CJ Motorsports billet intake and larger CAC. 7.) Installing a RPM rollbar, Recaro Halo seat, and 6 point harness. 8.) Aero, I will be installing Finite Element design front fender vents, Exhaust turndowns, and a real custom built diffuser. I may install a small splitter to balance out the aero. 9.) Since you can't do a burnout at some half mile events I will be getting tire warmers. Sticky Tires, Check.... 10.) Almost forgot. I will be looking at upgrading to a OG 3.3 diff. I should be able to run 189mph in 5th. JARblue, Rusty, Ghostvette and 5 others like this.

12-03-2019, 01:02 PM	#1878 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Going with the small changes, I see FL 4Motion, Hotrodz, Elmo370z and 4 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

12-07-2019, 03:45 PM	#1885 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	I tell ya what. Seeing several people try to hit my HP level and failing is kinda an eye opener. This is no doubt making me re-consider my changes. If I get greedy, it may cost me my motor. I built/Tuned my car right on the limit of what I thought was reliable. What to do, What to do. I really like it just the way it is. I may only do some of the stuff on my list. I need more time to think about it. FL 4Motion, Rusty, Hotrodz and 2 others like this.

12-08-2019, 12:48 AM	#1888 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	This video is worth posting in my thread for the folks that don't know. Rusty, Hotrodz, redondoaveb and 1 others like this. Last edited by Spooler; 12-08-2019 at 12:59 AM.

12-08-2019, 03:17 AM	#1889 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Anyone who has ever rode a motorcycle, has used a dog box. Hotrodz, Ghostvette, Spooler and 4 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM