Fast Intentions Stage 2 TT build by MA-Motorsports.

redondoaveb · 07-25-2019, 01:01 PM

Quote:

Originally Posted by Spooler

LMAO, stupid fast is still stupid fast. At this power level it is all about "Can you get traction".....

Yes, once you hit fourth gear.

Spooler · 07-25-2019, 01:21 PM

Quote:

Originally Posted by redondoaveb

Yes, once you hit fourth gear.

I was hooking up in 3rd due to the R888r's and 325/30/19 tire size. There was some spinning but it was very controllable and smooth.

Rusty · 07-25-2019, 02:18 PM

Quote:

Originally Posted by Spooler

LMAO, stupid fast is still stupid fast. At this power level it is all about "Can you get traction".....

Nah, it's going to be how far can you spin the tires in 6th?

Spooler · 07-25-2019, 02:35 PM

Quote:

Originally Posted by Rusty

Nah, it's going to be how far can you spin the tires in 6th?

I am sure Brian didn't try that. LMAO.

Elmo370z · 07-25-2019, 06:53 PM

Quote:

Originally Posted by Spooler

Anybody that knows anything about a turbo car, the more load you put on the engine the more boost you will make. That is why it is very difficult to get a good comparison on any turbo car or truck on a chassis dyno. If you have a clutch slipping, if you have traction issues, this all can effect the load on the motor which means less boost. Some folks can make more boost on the street or drag strip. So to put this all together, my car had a bigger load on it in 5th gear, it made boost sooner (by looking at the Tq graph), and it made more hp because of it. It still made 825hp at the wheel. That is 949 hp at the crank.

I make about 87whp in my Buick, it’s a v-6 also 3.1 liter. Made more for torque

tonyHTX · 07-26-2019, 11:27 AM

Quote:

Originally Posted by Spooler

Probably so, Not too worried about it. It's just a number at the end of the day. I am sure it will be plenty fast enough. It's very hard to say how other people report on their dyno numbers. We were transparent so everyone could see both. I am still happy with the 780hp in 4th.

For sure, you could very well just go when it is cooler or less humid during the fall or spring and easily get it.

Quote:

Originally Posted by Hotrodz

This is one of my pet peeves...why is it necessary to compare all things when there is no way to do so in a statistically valid way. Spooler posted both 4th gear and 5th gear data points and if you have a clue you can make whatever conclusion you want. I get tired of people trying to ruin others experience because they used a dyno that reads high or low, or questioning the validity of data unless it is obvious it can't be true.

Well I'm glad I was able to touch your pet peeve!

I have never tried to ruin his experience, I have been cheering during the whole build.

Like I said above, I'm sure if he does a recheck in the fall/spring it'd be there or could be there with minor adjustments.

And if you want to get into theory - If you are to use the dyno graphs as a tool and show multiple 4th gear pulls and one 5th gear pull how is that comparable?

Again, I'm not knocking anything that he's accomplished. I am in aww of how great things came out after the struggle. It gives me hope!

Spooler · 07-26-2019, 07:28 PM

All builds this big are a struggle. Just takes painstakingly long. Nothing you can do but hold on for the ride. That is why you see so many people sell them after it is done. They are exhausted. I can feel it but I am not selling. LMAO....

Spooler · 07-26-2019, 08:59 PM

The other issues with a big build is you don't have a magic formula on what works and what lives. There are a few guys up in this area but very few that actually drive them regularly. Some share info and some don't. I am happy with the outcome. If I decide to go further, I will need to work on the restrictions and a better intake manifold. At the moment I just don't see the need.

Elmo370z · 07-27-2019, 01:58 AM

Quote:

Originally Posted by Spooler

The other issues with a big build is you don't have a magic formula on what works and what lives. There are a few guys up in this area but very few that actually drive them regularly. Some share info and some don't. I am happy with the outcome. If I decide to go further, I will need to work on the restrictions and a better intake manifold. At the moment I just don't see the need.

Cjm billet manifold solves all your issues.

jchammond · 07-27-2019, 04:40 AM

Quote:

Originally Posted by Spooler

It is very difficult. I missed one goal of making 800hp at the wheel at 18psi of boost. It took 21psi of boost. I have a restriction somewhere that would need to be addressed to fix it. That is a squirrel that I didn't chase. Overall, I meet my goals of what I set out to do. Not bad for the first swing at it.

Nothing to sweat about at all,
Probably would have made it with a better grade ethanol

Nearly 1000bhp is just crazy...

Spooler · 07-27-2019, 12:01 PM

Quote:

Originally Posted by Elmo370z

Cjm billet manifold solves all your issues.

I have seen it and you have to do too many modifications for a street car at my power level. Many things have to be moved.

Spooler · 07-27-2019, 05:58 PM

Charles just posted on Instagram about the manifold. Must modify the engine harness, custom fabricated cooling pipes and reservoir, custom fabricated oil dipstick and tube. CJ Motorsports intercooler will be needed with exits on the top tank, custom intercooler pipes, and modify the radiator brace. It's is a big task to make it fit. The custom work will not be cheap. I do really like it though.

Elmo370z · 07-27-2019, 07:58 PM

Quote:

Originally Posted by Spooler

Charles just posted on Instagram about the manifold. Must modify the engine harness, custom fabricated cooling pipes and reservoir, custom fabricated oil dipstick and tube. CJ Motorsports intercooler will be needed with exits on the top tank, custom intercooler pipes, and modify the radiator brace. It's is a big task to make it fit. The custom work will not be cheap. I do really like it though.

Yeah we had long discussion about it. Not worth the time and effort unless you’re trying to break in Justin’s power level.

Spooler · 07-28-2019, 12:34 AM

Quote:

Originally Posted by Elmo370z

Yeah we had long discussion about it. Not worth the time and effort unless you’re trying to break in Justin’s power level.

AT 21psi of boost, I need one. LOL I need something and I don't like the GTR intake conversion or the AAM Intake. I have the same size turbo's as Justin they are just Zonarotor turbo's.

Elmo370z · 07-28-2019, 12:43 AM

Quote:

Originally Posted by Spooler

AT 21psi of boost, I need one. LOL I need something and I don't like the GTR intake conversion or the AAM Intake. I have the same size turbo's as Justin they are just Zonarotor turbo's.

Have to see send your logs to Seb and see what he can improve on. Justin’s car was untouched besides the exhaust, manifolds and turbo kit. Soho has a manifold. Ported stock helps a lot.

07-26-2019, 07:28 PM	#1507 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	All builds this big are a struggle. Just takes painstakingly long. Nothing you can do but hold on for the ride. That is why you see so many people sell them after it is done. They are exhausted. I can feel it but I am not selling. LMAO.... Rusty, Hotrodz, Ghostvette and 1 others like this.

07-26-2019, 08:59 PM	#1508 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	The other issues with a big build is you don't have a magic formula on what works and what lives. There are a few guys up in this area but very few that actually drive them regularly. Some share info and some don't. I am happy with the outcome. If I decide to go further, I will need to work on the restrictions and a better intake manifold. At the moment I just don't see the need. Rusty, Hotrodz, Ghostvette and 1 others like this.

07-27-2019, 05:58 PM	#1512 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Charles just posted on Instagram about the manifold. Must modify the engine harness, custom fabricated cooling pipes and reservoir, custom fabricated oil dipstick and tube. CJ Motorsports intercooler will be needed with exits on the top tank, custom intercooler pipes, and modify the radiator brace. It's is a big task to make it fit. The custom work will not be cheap. I do really like it though. Rusty, Hotrodz, Ghostvette and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM