Fast Intentions Stage 2 TT build by MA-Motorsports.

redondoaveb · 07-17-2019, 03:51 PM

Quote:

Originally Posted by Elmo370z

Not unless you been in contact with him the entire build, nope sir

I was referring to the experience on my car.

Elmo370z · 07-17-2019, 04:23 PM

Quote:

Originally Posted by redondoaveb

I was referring to the experience on my car.

I’m just an idiot don’t mind me

Spooler · 07-17-2019, 07:24 PM

I am sending my brake ducts to MA to be installed. Just need the 3in. backing plates made and hose installed. I hope the CAC and intake pipes are not in the way. Hotrodz was able to get his done so I should be good.

Hotrodz · 07-17-2019, 08:23 PM

Quote:

Originally Posted by Spooler

I am sending my brake ducts to MA to be installed. Just need the 3in. backing plates made and hose installed. I hope the CAC and intake pipes are not in the way. Hotrodz was able to get his done so I should be good.

Yep it is a tight fit! I'm sure they can make it fit.

Sent from my SM-G965U using Tapatalk

Spooler · 07-17-2019, 08:40 PM

Quote:

Originally Posted by Hotrodz

Yep it is a tight fit! I'm sure they can make it fit.

Sent from my SM-G965U using Tapatalk

I need some safety. I am only terrified of one thing, loosing my brakes. I want to drive the car and see how they do. If I have any issues a Stoptech BBK kit will go on the car. I am not playing around with this at all. I won't dicky do around with my brakes.

Hotrodz · 07-17-2019, 09:53 PM

Quote:

Originally Posted by Spooler

I need some safety. I am only terrified of one thing, loosing my brakes. I want to drive the car and see how they do. If I have any issues a Stoptech BBK kit will go on the car. I am not playing around with this at all. I won't dicky do around with my brakes.

You just got to get used too the speed again. Everything comes up on you fast and you have to anticipate start slowing down sooner. The other part of the game is having really responsive brakes gives you the opportunity to brake late and those that are following too close at speed cannot brake as hard makes being rear ended a real deal as you already know more than the rest of us. Better rotors and pads may be all you need. Use brake fluid equivalent to Castro SRF racing fluid as it really makes a difference on brake fill and responsiveness. Also get a Z1 master cylinder brace as it will aid in the performance of your brakes.

Rusty · 07-18-2019, 12:14 AM

Quote:

Originally Posted by Elmo370z

I’m just an idiot don’t mind me

Village?

Spooler · 07-18-2019, 10:10 AM

Quote:

Originally Posted by Hotrodz

You just got to get used too the speed again. Everything comes up on you fast and you have to anticipate start slowing down sooner. The other part of the game is having really responsive brakes gives you the opportunity to brake late and those that are following too close at speed cannot brake as hard makes being rear ended a real deal as you already know more than the rest of us. Better rotors and pads may be all you need. Use brake fluid equivalent to Castro SRF racing fluid as it really makes a difference on brake fill and responsiveness. Also get a Z1 master cylinder brace as it will aid in the performance of your brakes.

I already have the rotors and pads. Z1 2-piece rotors on all 4 corners and Carbotech XP8 pads on all 4 corners. I use Motul RBF600, I may change to the Castrol SRF later. We shall see. I have had enough dealings with undersized brakes, I will be able to tell real quick after getting the car back on what I need to do. If anything.

Hotrodz · 07-18-2019, 10:46 AM

Quote:

Originally Posted by Spooler

I already have the rotors and pads. Z1 2-piece rotors on all 4 corners and Carbotech XP8 pads on all 4 corners. I use Motul RBF600, I may change to the Castrol SRF later. We shall see. I have had enough dealings with undersized brakes, I will be able to tell real quick after getting the car back on what I need to do. If anything.

All I am saying is on the street I found my track setup to be sufficient at 600 whp. The only thing different is 10XP up front. They squeal and dust but they work. I am changing my front rotors to Stoptech 2 piece because the Z1s are worn and I was getting significant shudder at my last track event. With all that people are experiencing with Z1 rotors at the track I decided I would do something different rather than rebuild my front rotors.

Spooler · 07-18-2019, 11:18 AM

Quote:

Originally Posted by Hotrodz

All I am saying is on the street I found my track setup to be sufficient at 600 whp. The only thing different is 10XP up front. They squeal and dust but they work. I am changing my front rotors to Stoptech 2 piece because the Z1s are worn and I was getting significant shudder at my last track event. With all that people are experiencing with Z1 rotors at the track I decided I would do something different rather than rebuild my front rotors.

I got new steels for my fronts and pads all around. We shall see.

Elmo370z · 07-18-2019, 01:04 PM

Try winmax pads

Elmo370z · 07-18-2019, 01:05 PM

Z1 rotors are crap

Spooler · 07-18-2019, 01:12 PM

Quote:

Originally Posted by Elmo370z

Z1 rotors are crap

I have never had a problem with over 90k driven. Track driving is a different story. After everything that I have done, I will not skimp on brakes. Plenty of go now, gotta get the, Wo horsey, dialed in.

Spooler · 07-18-2019, 01:18 PM

Quote:

Originally Posted by Rusty

Any idea on home coming?

Did Elmo leave home?

Rusty · 07-18-2019, 01:43 PM

Quote:

Originally Posted by Spooler

Did Elmo leave home?

Is that what you call your car now?

07-17-2019, 07:24 PM	#1443 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	I am sending my brake ducts to MA to be installed. Just need the 3in. backing plates made and hose installed. I hope the CAC and intake pipes are not in the way. Hotrodz was able to get his done so I should be good. Hotrodz likes this.

07-18-2019, 01:04 PM	#1451 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Try winmax pads Hotrodz likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM

07-18-2019, 01:05 PM	#1452 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Z1 rotors are crap