Fast Intentions Stage 2 TT build by MA-Motorsports.

solidus · 05-02-2019, 11:02 AM

Quote:

Originally Posted by Spooler

Timing chains are good to go. Checking VVEL now.

You do realize if the VVEL solenoids are off thats me doing a Jedi mind trick on you.
They got my diff set up and dammit if the Z1 cover isn't a problem with the Motordyne exhaust. Has to have fins shaved.

Spooler · 05-02-2019, 12:18 PM

Quote:

Originally Posted by solidus

You do realize if the VVEL solenoids are off thats me doing a Jedi mind trick on you.
They got my diff set up and dammit if the Z1 cover isn't a problem with the Motordyne exhaust. Has to have fins shaved.

You mean the VVEL motors? My car has more of a lope than it should. I am thinking they are off. Guess they will find out when they check them.

Rusty · 05-02-2019, 01:03 PM

Quote:

Originally Posted by solidus

You do realize if the VVEL solenoids are off thats me doing a Jedi mind trick on you.
They got my diff set up and dammit if the Z1 cover isn't a problem with the Motordyne exhaust. Has to have fins shaved.

Standard procedure with pipes that tuck close to the Z1 diff cover.

Rusty · 05-02-2019, 01:04 PM

Quote:

Originally Posted by Spooler

You mean the VVEL motors? My car has more of a lope than it should. I am thinking they are off. Guess they will find out when they check them.

Shouldn't that been checked when assembling the motor?

Hotrodz · 05-02-2019, 01:18 PM

Quote:

Originally Posted by Rusty

Shouldn't that been checked when assembling the motor?

There you go pouring salt in an open wound!

Sent from my SM-G965U using Tapatalk

Rusty · 05-02-2019, 01:20 PM

Quote:

Originally Posted by Hotrodz

There you go pouring salt in an open wound!

Sent from my SM-G965U using Tapatalk

Gee....,... just stating the obvious.

Spooler · 05-02-2019, 01:35 PM

Quote:

Originally Posted by Rusty

Shouldn't that been checked when assembling the motor?

I am not sure who installed them. The machine shop may have. They assembled the Long block. Carl is going to check them and see.

Spooler · 05-02-2019, 01:43 PM

I wish I had the factory service manual in front of me so I could read the procedure. I'll go to my old dealership I worked at one day and bumb the manual for a bit.

Spooler · 05-02-2019, 01:46 PM

I wonder if it is my old dead pedal problem raising it's weary head. Every now and then I would get a dead pedal. The throttle response was a pig. I could only get about 1/4 to 1/2 throttle. No codes, nothing. Shut the car off and restart, same thing. I would have to disconnect the drivers side throttle body and re-connect. That would fix it.

Spooler · 05-02-2019, 01:50 PM

Quote:

Originally Posted by Rusty

Gee....,... just stating the obvious.

It's double check/triple check time. Everything get's checked again. Just like the timing chains. They were checked and all is good in that department.

Spooler · 05-02-2019, 04:37 PM

Quote:

Originally Posted by Spooler

I wonder if it is my old dead pedal problem raising it's weary head. Every now and then I would get a dead pedal. The throttle response was a pig. I could only get about 1/4 to 1/2 throttle. No codes, nothing. Shut the car off and restart, same thing. I would have to disconnect the drivers side throttle body and re-connect. That would fix it.

Just got this forwarded to Carl. This could very well be my issue. Ugg, I forgot all about it.

solidus · 05-02-2019, 04:49 PM

Quote:

Originally Posted by Spooler

I am not sure who installed them. The machine shop may have. They assembled the Long block. Carl is going to check them and see.

VVEL Solenoids should have been canibalized from your original motor to the longblock. They can marginally be set up using Ecutek or UPREV but to do it perfectly balanced Consult should be used. I told you about mine being off .150 bank 1 to .2?? bank 2.

Spooler · 05-02-2019, 04:52 PM

Quote:

Originally Posted by solidus

VVEL Solenoids should have been canibalized from your original motor to the longblock. They can marginally be set up using Ecutek or UPREV but to do it perfectly balanced Consult should be used. I told you about mine being off .150 bank 1 to .2?? bank 2.

They have done many of these builds. I am sure they know what to do. It'
s just my car being a pain in the arse because it is my car. LOL, that's how I roll. LMAO.

madwi · 05-02-2019, 07:58 PM

Quote:

Originally Posted by Spooler

Its just my car being a pain in the arse because it is my car. LOL, that's how I roll. LMAO.

The car doesnt fall too far from the tree

Rusty · 05-02-2019, 08:07 PM

Quote:

Originally Posted by madwi

The car doesnt fall too far from the tree

The car is like him. Grumpy.

05-02-2019, 01:43 PM	#1088 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	I wish I had the factory service manual in front of me so I could read the procedure. I'll go to my old dealership I worked at one day and bumb the manual for a bit. Rusty and JLarson like this.

05-02-2019, 01:46 PM	#1089 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	I wonder if it is my old dead pedal problem raising it's weary head. Every now and then I would get a dead pedal. The throttle response was a pig. I could only get about 1/4 to 1/2 throttle. No codes, nothing. Shut the car off and restart, same thing. I would have to disconnect the drivers side throttle body and re-connect. That would fix it. jchammond and JLarson like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM