Fast Intentions Stage 2 TT build by MA-Motorsports.

blueranger · 04-21-2019, 11:58 AM

Quote:

Originally Posted by tonyHTX

I think we should throw a really big boosted VQ party at a destination in the middle of the country 🎉

I'll have my dancing shoes on when you come to Houston!

2020 VQ Shootout with all the Boosted Brands co-sponsoring the prize money

blueranger · 04-21-2019, 12:16 PM

Quote:

Originally Posted by Spooler

Car will remain in street trim but switching Wheels and tires are a go. Will stay with the stock 6 speed. The 1/2 mile speed will be tough. I will need to add a rollbar down the road with a race seat and 5 point harness. I have to wear a HANS device for safety.

I highly recommend RPM Rollbars in Oregon... They have the best lightweight chromoly rollbars. They already have a template for the Z and can ship it to you.

Spooler · 04-21-2019, 12:53 PM

Quote:

Originally Posted by blueranger

I highly recommend RPM Rollbars in Oregon... They have the best lightweight chromoly rollbars. They already have a template for the Z and can ship it to you.

I have seen one in person and wasn't crazy about it. First thing for me to do
is figure out if my neck can take it.

Spooler · 04-21-2019, 12:55 PM

Quote:

Originally Posted by tonyHTX

I think we should throw a really big boosted VQ party at a destination in the middle of the country ��

I'll have my dancing shoes on when you come to Houston!

Go ahead and take your spare tire and interior out. I hate to see someone videoing that in the pits when you get beat. You in the car with your plumbers crack showing, stuff being slung out the car, that would go viral. LMAO

Spooler · 04-21-2019, 01:56 PM

It would be cool as hell if we could get SOHO, Dynasty, Specialty Z, MA Motorsports, CJ Motorsports, and Fast Intentions to come out for TX2K. Just bombard them with 10 to 15 TT'd 370z's. We gotta figure out a way to make this happen February 2020. I am in.

Spooler · 04-21-2019, 06:12 PM

We need to do some fast talking at Zdayz to make this TX2K happen next year.

URBiN~HURMiT · 04-21-2019, 07:10 PM

Quote:

Originally Posted by blueranger

I highly recommend RPM Rollbars in Oregon... They have the best lightweight chromoly rollbars. They already have a template for the Z and can ship it to you.

I have their RPM 6 point rollbar.
(No need to have the side bars on for normal driving).
It's OK for a bolt in.
I went with the RPM primarily because Brian at MA-Motorsports wouldn't be able to fabricate a custom one until this coming winter again.

Fortunately I don't need to have the seat racked all of the way back so it's not too cramped.
One drawback is that it further reduces the already very slim view out the back, making it difficult to back up or even see traffic behind you.
A custom roll bar could be fabricated to minimize this by bringing the top hoop forward.
I'm considering getting a rear view mirror with the rear camera feature - or going with a Pioneer H/U that has the rear camera feature.

Side note here ... I went to the dragstrip and the Inspector told me that NHRA had changed the rules recently and that I didn't need the roll bar until 10.0.
He said that NHRA revamped and modernized the rules now that factory cars were running in the 11's and even faster.
Next time to the strip and a different Inspector didn't mention the rules changes.
Worth checking it out.

URBiN~HURMiT · 04-21-2019, 09:12 PM

Forgot to add...
The cost quoted to me by Daelen for a custom rollbar by MA-Motorsports would be in the neighborhood of $3500 and $4000.
The cost of the RPM was $2100+ and an additional $1700+ for the installation by MA.
So - no benefit going with the prefab RPM over the custom MA-M one except for the time savings.

Spooler · 04-21-2019, 09:30 PM

Quote:

Originally Posted by URBiN~HURMiT

Forgot to add...
The cost quoted to me by Daelen for a custom rollbar by MA-Motorsports would be in the neighborhood of $3500 and $4000.
The cost of the RPM was $2100+ and an additional $1700+ for the installation by MA.
So - no benefit going with the prefab RPM over the custom MA-M one except for the time savings.

If I get one it will more than likely be an RPM bar. I will do the install myself. If I hurt myself in the process I will call in re-enforcements. JOBY!!!!!! at the top of my lungs. LOL I should be fine. I'll pay myself that $1700.

madwi · 04-21-2019, 10:37 PM

Quote:

Originally Posted by Spooler

If I get one it will more than likely be an RPM bar. I will do the install myself. If I hurt myself in the process I will call in re-enforcements. JOBY!!!!!! at the top of my lungs. LOL I should be fine. I'll pay myself that $1700.

Certainly cant go wrong with JC's help if needed.

Cant wait to see more of your ride at the end of this week.

Spooler · 04-21-2019, 11:08 PM

Quote:

Originally Posted by madwi

Certainly cant go wrong with JC's help if needed.

Cant wait to see more of your ride at the end of this week.

You and me both.

Hotrodz · 04-22-2019, 12:22 AM

Quote:

Originally Posted by URBiN~HURMiT

Forgot to add...

The cost quoted to me by Daelen for a custom rollbar by MA-Motorsports would be in the neighborhood of $3500 and $4000.

The cost of the RPM was $2100+ and an additional $1700+ for the installation by MA.

So - no benefit going with the prefab RPM over the custom MA-M one except for the time savings.

Wow, I got a RPM 4 point that I bought used for $600 and the kid installed it for me for another $300.

Sent from my SM-G965U using Tapatalk

Spooler · 04-22-2019, 12:32 AM

This is going to be one long week. Ugg, can I just sleep all of it. LOL Wake me up on Thursday afternoon.

madwi · 04-22-2019, 12:44 AM

Quote:

Originally Posted by Spooler

This is going to be one long week. Ugg, can I just sleep all of it. LOL Wake me up on Thursday afternoon.

I will share my valium with ya

Spooler · 04-22-2019, 12:48 AM

Quote:

Originally Posted by madwi

I will share my valium with ya

Na, don't need any drugs. I am good.

04-21-2019, 01:56 PM	#995 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,804 Drives: 2013 Nismo 370z Rep Power: 2684392	It would be cool as hell if we could get SOHO, Dynasty, Specialty Z, MA Motorsports, CJ Motorsports, and Fast Intentions to come out for TX2K. Just bombard them with 10 to 15 TT'd 370z's. We gotta figure out a way to make this happen February 2020. I am in. JARblue, cv129, Rusty and 4 others like this. Last edited by Spooler; 04-21-2019 at 02:01 PM.

04-21-2019, 09:12 PM	#998 (permalink)
URBiN~HURMiT Base Member Join Date: Jul 2017 Location: Northern New Jersey Posts: 156 Drives: 2009 370z 6MT Rep Power: 4621	RPM Rollbar Forgot to add... The cost quoted to me by Daelen for a custom rollbar by MA-Motorsports would be in the neighborhood of $3500 and $4000. The cost of the RPM was $2100+ and an additional $1700+ for the installation by MA. So - no benefit going with the prefab RPM over the custom MA-M one except for the time savings. __________________ - -*Z&I* ~~~~

04-22-2019, 12:32 AM	#1003 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,804 Drives: 2013 Nismo 370z Rep Power: 2684392	This is going to be one long week. Ugg, can I just sleep all of it. LOL Wake me up on Thursday afternoon. Hotrodz, madwi and URBiN~HURMiT like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM

04-21-2019, 06:12 PM	#996 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,804 Drives: 2013 Nismo 370z Rep Power: 2684392	We need to do some fast talking at Zdayz to make this TX2K happen next year.