Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler

Did Forged Performance tune his car? I saw something on Instagram about a 2.5 FI TT car.

Spooler

Actually I am glad he made that much. Why, because MA's dyno reads low and folks were already asking for a Dynojet run of my car and it wasn't even finished yet. I personally don't care to go through the hassle of running the car on someone elses dyno. At the end of the day if I am happy that is all that matters.

Elmo370z

Yes forged tuned it

Hotrodz

^^^ This! I really don't care about the number as it will be enough period. I simply want a platform that will give another five years or better of being beat to death on the track and some half mile flat out run events.

Sent from my SM-G965U using Tapatalk

__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer|

redondoaveb

I'd like to do some half mile events also.

__________________
Fast Intentions "Stage Seb" twin turbo #098- Specialty Z/Tial-Xonarotor/CJM/Ecutek/HKS/KW/SPL/Hotchkis/Rohana/Toyo
700+whp

URBiN~HURMiT

Here's the numbers I copied from the ExCel chart I made to convert the MA-M DynoLog to the DynoJet numbers.
It's a 17% factor

Heart Breaker +17%

DynoLog Dynojet


400 = 468
410 = 480
420 = 491
430 = 503
440 = 515
450 = 527
460 = 538
470 = 550
480 = 562
490 = 573
500 = 585
510 = 597
520 = 608
530 = 620
540 = 632
550 = 644
560 = 655
570 = 667
580 = 679
590 = 690
600 = 702
610 = 714
620 = 725
630 = 737
640 = 749
650 = 761
660 = 772
670 = 784
680 = 796
690 = 807
700 = 819
710 = 831
720 = 842
730 = 854
740 = 866
750 = 878
760 = 889
770 = 901
780 = 913
790 = 924
800 = 936
810 = 948
820 = 959
830 = 971
840 = 983
850 = 995
860 = 1006
870 = 1018
880 = 1030
890 = 1041
900 = 1053

Supporting info:

Why Our Mainline Dyno Produces More Accurate Results

Inertia Dynos - like DynoJet dynos, measure power based on the length of time it takes to "spool up" two heavy steel drums within the dyno. Horsepower numbers are much higher because they are based on distance traveled / acceleration rather than force, at least 17% higher than load bearing dynos in our experience. Cruising air / fuel ratios are generally richer because they are based on wide open throttle conditions.

Load Bearing Dynos - measure power based on the force applied to the rollers when the dyno brake is applied. Loading the engine gives us the ability to hold the engine at various loads for driveability tuning and maximum fuel economy. All Mainline dynos are load bearing dynos.

load bearing to inertia dyno horsepower conversion
ACCURATE, DEPENDABLE, REPEATABLE RESULTS
The Mainline Dyno is widely described as the "no fudge" or the "unfudgeable" dyno, and is the obvious choice for dyno operators who choose an honest approach to business and do not want to be caught up in the debacle about why the same car can get differing results on the same brand of dyno, why the same car can produce inconsistent results using different dyno "modes" or even why a dyno needs different "modes" for 4, 6 and 8 cylinder vehicles.

The Mainline Dyno deserves its outstanding reputation for producing the same results from dyno to dyno, as a scientific approach has been taken that provides the highest degree of accuracy. No need for a special operating mode that reduces the ability of the operator to affect the results. No menu options for the dyno operator to "modify" results. There are definitely no cheat modes and no smoke or mirrors on the Mainline Dyno.

__________________
- -Z&I ~~~~

Spooler

Car has been delivered to MA. DC traffic is hell. Brian has a couple of vehicles to tidy up before he goes full out on mine.
It's in good hands.

Rusty

I figured you was in the process of dropping it off. Because you've been quite.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

URBiN~HURMiT

The Clock Starts === NOW ===

Attached Images

giphy.gif (17.5 KB, 9 views)

__________________
- -Z&I ~~~~

jchammond

He’ll be fine; ready to see that “Beast” @Zdaz this year!
Spooler, have a safe trip back home... if you aren’t back already
Glad you had a warmed up window, to get it up the road

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

Spooler

LOL, The clock started last year on March 6th when I started this thread. I can see the finish line from here.

Spooler

Already home, I got to meet everyone and talk about the build. I got lucky we had this freak warm up period. That worked out in my favor for sure. Hoping the car will be done the end of April at the latest.

Elmo370z

Fudges. I’m going to be eith my car for a long time

Spooler

?????? eith ????? without???

Elmo370z

Tell them to pay for it