Fast Intentions Stage 2 TT build by MA-Motorsports.

solidus · 01-26-2019, 01:11 AM

I know Marc. Remember when he first moved to Orlando.

Spooler · 01-26-2019, 02:25 AM

If you know him, get him to make a billet VQ37 block. Just sayin.

solidus · 01-26-2019, 11:25 PM

Quote:

Originally Posted by Spooler

If you know him, get him to make a billet VQ37 block. Just sayin.

Lol! Last time I saw Mark he had a small Fab shop and had just EASd from the Marines. Then he blew up. From what I know they can build VQs but their billet stuff is pricey. That said I may end up driving over.

Spooler · 01-26-2019, 11:38 PM

Quote:

Originally Posted by solidus

Lol! Last time I saw Mark he had a small Fab shop and had just EASd from the Marines. Then he blew up. From what I know they can build VQs but their billet stuff is pricey. That said I may end up driving over.

They make a VQ35 billet block. I am not sure if it is a wet block or not.

URBiN~HURMiT · 01-27-2019, 12:57 AM

Quote:

Originally Posted by solidus

External with the BP kit.

The reason I asked was that AAM had problems with the Tune - Ecutek - and Flex Fuel - then they blew the motor.
MA-Motorsports also had a problem with making the tune work - boost spikes and boost creep - so they went with external waste gates and external boost controller.
This effectively eliminated the automatically compensating Flex Fuel tune.
It ended up being a major loss of time and money.

Spooler · 01-27-2019, 01:21 PM

Quote:

Originally Posted by URBiN~HURMiT

The reason I asked was that AAM had problems with the Tune - Ecutek - and Flex Fuel - then they blew the motor.
MA-Motorsports also had a problem with making the tune work - boost spikes and boost creep - so they went with external waste gates and external boost controller.
This effectively eliminated the automatically compensating Flex Fuel tune.
It ended up being a major loss of time and money.

I have had issues before with internal wastegates. Boost creep and boost spikes also. Internal wastegates suck.

Spooler · 01-27-2019, 07:53 PM

I may have to put my stock wheels and tires on before I take the car north. R888r's aren't gonna like the cold.

solidus · 01-27-2019, 08:01 PM

Quote:

Originally Posted by Spooler

I may have to put my stock wheels and tires on before I take the car north. R888r's aren't gonna like the cold.

It doesn't really get that cold here in Orlando but what I can tell you is that they dont like to act right in anything under 50 degrees or so.

Spooler · 01-27-2019, 08:25 PM

Quote:

Originally Posted by solidus

It doesn't really get that cold here in Orlando but what I can tell you is that they dont like to act right in anything under 50 degrees or so.

RE11's don't like it either. I am use to that. I am worried about the temps getting below 20deg. When I read the spec sheet for the R888r's, the tread will crack if it get's below 15 deg. They have to be set inside for a day or two above 68 deg. The poor guys at MA's shop are dealing with 38 deg's in the shop with heaters blaring. Those guys are freezing. It's cold as heck up there right now.

Spooler · 01-27-2019, 08:26 PM

Yeah, I am stressing.... LOL

Link to the pdf.

https://www.tirerack.com/images/pdf/...eStorage-6.pdf

Hotrodz · 01-27-2019, 08:47 PM

It's not that cold here but I have a set of new tires in our spare bed room lol.

Sent from my SM-G965U using Tapatalk

Rusty · 01-27-2019, 08:48 PM

Quote:

Originally Posted by Spooler

RE11's don't like it either. I am use to that. I am worried about the temps getting below 20deg. When I read the spec sheet for the R888r's, the tread will crack if it get's below 15 deg. They have to be set inside for a day or two above 68 deg. The poor guys at MA's shop are dealing with 38 deg's in the shop with heaters blaring. Those guys are freezing. It's cold as heck up there right now.

This Wednesday. It's going to be below zero. It's going to be close for them. Brrrr.

Spooler · 01-28-2019, 11:04 PM

Just ordered the Z1 Bell Raceworks diff brace.

Rusty · 01-28-2019, 11:05 PM

Quote:

Originally Posted by Spooler

Just ordered the Z1 Bell Raceworks diff brace.

Mine should be here this week.

Hotrodz · 01-28-2019, 11:11 PM

Quote:

Originally Posted by Rusty

Mine should be here this week.

Ha ha you guys are going to make me spend money.

Sent from my SM-G965U using Tapatalk

01-26-2019, 02:25 AM	#632 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	If you know him, get him to make a billet VQ37 block. Just sayin. Hotrodz and jchammond like this.

01-27-2019, 07:53 PM	#637 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	I may have to put my stock wheels and tires on before I take the car north. R888r's aren't gonna like the cold. Hotrodz and madwi like this.

01-27-2019, 08:47 PM	#641 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	It's not that cold here but I have a set of new tires in our spare bed room lol. Sent from my SM-G965U using Tapatalk Spooler and jchammond like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-28-2019, 11:04 PM	#643 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	Just ordered the Z1 Bell Raceworks diff brace. Rusty, Hotrodz and redondoaveb like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM

01-26-2019, 01:11 AM	#631 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	I know Marc. Remember when he first moved to Orlando.

01-27-2019, 08:26 PM	#640 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,798 Drives: 2013 Nismo 370z Rep Power: 2684392	Yeah, I am stressing.... LOL Link to the pdf. https://www.tirerack.com/images/pdf/...eStorage-6.pdf