Fast Intentions Stage 2 TT build by MA-Motorsports.

Hotrodz · 01-19-2019, 04:56 PM

Quote:

Originally Posted by jwick

Agreed. How many people are actually running north of 600wtq, if that is even the limit or just an isolated incident, ten, fifteen tops?

This^^^^I here of more broken axles and they are few and far between.

Sent from my SM-G965U using Tapatalk

Spooler · 01-19-2019, 05:15 PM

Quote:

Originally Posted by Hotrodz

This^^^^I here of more broken axles and they are few and far between.

Sent from my SM-G965U using Tapatalk

I got the axles covered. Trust me when I say this. If our transmission can be broken, I will break it. I have skills in that department. I am not talking about bad syncro's. I am talking about breaking a shaft, ripping teeth of a gear, or the outright explosion of said tranny. LOL I sure as heck hope not but I have already forewarned the wife so she is not surprised if it happens.

Rusty · 01-19-2019, 05:27 PM

I shatter the case on a BW Super T 10, broke the tail housing on a Rock Crusher in my TransAm.

Broke the main shaft in a 70's Hemi manual in my 440 Dart.

Spooler · 01-19-2019, 05:43 PM

Quote:

Originally Posted by Rusty

I shatter the case on a BW Super T 10, broke the tail housing on a Rock Crusher in my TransAm.

Broke the main shaft in a 70's Hemi manual in my 440 Dart.

You got skills too. LOL

Rusty · 01-19-2019, 05:54 PM

Quote:

Originally Posted by Spooler

You got skills too. LOL

There is a trail of broken parts behind me.

5 diffs, 6 trannies, 8 motors, driveshafts, twisted frame, axles, wheel studs. That's just in cars. Motorcycles are another chapter.

Spooler · 01-20-2019, 11:09 PM

I have looked high and low for a billet CD009 input shaft with no luck. Only thing we can do is see if Sonnax will make one.

jchammond · 01-22-2019, 05:38 AM

Quote:

Originally Posted by Spooler

I have looked high and low for a billet CD009 input shaft with no luck. Only thing we can do is see if Sonnax will make one.

You gonna have to get traction before you begin breaking the large parts

With the potential power you’ll be making;you’re gonna draw a lotta black lines

Spooler · 01-22-2019, 11:09 AM

Quote:

Originally Posted by jchammond

You gonna have to get traction before you begin breaking the large parts

With the potential power you’ll be making;you’re gonna draw a lotta black lines

If I had to guess the problem happens when you shock load the input shaft. Say you are in it all the way and you hit a bump, you loose traction, and then the car hooks back up hard. That's what will kill an input shaft on the street. Drag strip issues all depend on how good the prep is. If it is a good prep, it can be very hard on drive train parts.

Spooler · 01-22-2019, 01:52 PM

Just ordered some new tires. Going with Bridgestone S007 for now. My back tires are done and it is too cold to be messing around with R888r's.

Spooler · 01-23-2019, 10:55 AM

Dang it. The 325/30/19's S007's are on backorder until mid February. Frustration is setting in. Guess I will try R888r's.

solidus · 01-23-2019, 05:21 PM

Spooler the 888r hooks good for me on 17psi WOT logs. But I'm in Florida so the coldest I had them out doing that was probably low 50s. Just had to drive for a while before I had confidence to do it with some heat. I had planned to do them in 325/30 on Nismo's like my spare set with RE11S but the 305 888r actually sits wider on the wheel.

Hotrodz · 01-23-2019, 05:44 PM

Chit is getting real!

Sent from my SM-G965U using Tapatalk

Spooler · 01-23-2019, 07:21 PM

Oops, sorry you guys saw my nuts. LOL

Spooler · 01-23-2019, 07:22 PM

Quote:

Originally Posted by solidus

Spooler the 888r hooks good for me on 17psi WOT logs. But I'm in Florida so the coldest I had them out doing that was probably low 50s. Just had to drive for a while before I had confidence to do it with some heat. I had planned to do them in 325/30 on Nismo's like my spare set with RE11S but the 305 888r actually sits wider on the wheel.

I have 11.5 in wheels. No problems for me.

Rusty · 01-23-2019, 07:57 PM

Ahhhhhh pretty parts.

01-19-2019, 05:27 PM	#603 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,221 Drives: 2011 Nismo GM 6M Rep Power: 2684438	I shatter the case on a BW Super T 10, broke the tail housing on a Rock Crusher in my TransAm. Broke the main shaft in a 70's Hemi manual in my 440 Dart. Spooler and URBiN~HURMiT like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-22-2019, 01:52 PM	#609 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Just ordered some new tires. Going with Bridgestone S007 for now. My back tires are done and it is too cold to be messing around with R888r's. URBiN~HURMiT likes this.

01-23-2019, 05:44 PM	#612 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Chit is getting real! Sent from my SM-G965U using Tapatalk Rusty, Spooler, jchammond and 4 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-23-2019, 07:21 PM	#613 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Oops, sorry you guys saw my nuts. LOL Rusty and Hotrodz like this.

01-23-2019, 07:57 PM	#615 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,221 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Ahhhhhh pretty parts. Spooler likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-20-2019, 11:09 PM	#606 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	I have looked high and low for a billet CD009 input shaft with no luck. Only thing we can do is see if Sonnax will make one.

01-23-2019, 10:55 AM	#610 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Dang it. The 325/30/19's S007's are on backorder until mid February. Frustration is setting in. Guess I will try R888r's.

01-23-2019, 05:21 PM	#611 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10081	Spooler the 888r hooks good for me on 17psi WOT logs. But I'm in Florida so the coldest I had them out doing that was probably low 50s. Just had to drive for a while before I had confidence to do it with some heat. I had planned to do them in 325/30 on Nismo's like my spare set with RE11S but the 305 888r actually sits wider on the wheel.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM