Fast Intentions Stage 2 TT build by MA-Motorsports.

gbrettin · 01-08-2019, 03:18 PM

Quote:

Originally Posted by Spooler

I am not a big drag racing guy. I like watching it but I don't care to much to participate. Kinda boring. You guys want to impress me, get in the 9's.

Deal. I'm shooting for 8's and I'm not exclusively gunning for a drag car.

Spooler · 01-08-2019, 03:53 PM

Quote:

Originally Posted by gbrettin

Deal. I'm shooting for 8's and I'm not exclusively gunning for a drag car.

Don't you need a full cage to pass tech and need a parachute for over 140 or 150mph?

gbrettin · 01-08-2019, 04:22 PM

Yeah. It might be a one and done deal.

Sent from my SM-G930P using Tapatalk

Spooler · 01-08-2019, 07:01 PM

Well, the machine shop is aholes and elbows on my motor. Got 2 guys working on it. John worked his magic and got them motivated. My turbo's are shipping out from Fast Intentions today also. Moving along now.

URBiN~HURMiT · 01-08-2019, 08:53 PM

Quote:

Originally Posted by Spooler

Well, the machine shop is aholes and elbows on my motor. Got 2 guys working on it. John worked his magic and got them motivated. My turbo's are shipping out from Fast Intentions today also. Moving along now.

Spoke with Jon today and talked him in to swapping motors mine for yours - and putting your motor into my car ...
Cost me a little $$$ jingle $$$ to convince him it was OK, but it will be well worth it.
Hope you don't mind.

(just funnin' witch'ya)

I did speak with Jon though - they have the BR Racing scavenge pump now in the shop and the RPM roll bar should be there later this week.
Most everything is now done or in place to be done.

O' Happy Day
https://youtu.be/6zT8AyfsFmA

Spooler · 01-08-2019, 10:23 PM

Quote:

Originally Posted by URBiN~HURMiT

Spoke with Jon today and talked him in to swapping motors mine for yours - and putting your motor into my car ...
Cost me a little $$$ jingle $$$ to convince him it was OK, but it will be well worth it.
Hope you don't mind.

(just funnin' witch'ya)

I did speak with Jon though - they have the BR Racing scavenge pump now in the shop and the RPM roll bar should be there later this week.
Most everything is now done or in place to be done.

O' Happy Day
https://youtu.be/6zT8AyfsFmA

Don't worry, they are stealing your intercooler (CAC) for me since I am such a great customer. LOL

blueranger · 01-08-2019, 10:44 PM

Quote:

Originally Posted by Spooler

You could be fast as crap if you get that auto tranny figured out. Need a billet triple disk converter, up the valvebody pressure, a few billet shafts, etc.

I have been Drag Racing for 2.5 years 20+ times a year with no issues so far. I have the Fast Intentions built 7AT not the Level 10 everyone complains about

URBiN~HURMiT · 01-09-2019, 03:00 AM

Quote:

Originally Posted by Spooler

Don't worry, they are stealing your intercooler (CAC) for me since I am such a great customer. LOL

...lol...
It took them all of 1 day to fabricate and weld it all together ~~~ then 3 weeks to find a box big enough to ship it in.
True story ~ No foolin'
And you wonder why builds take so long

URBiN~HURMiT · 01-09-2019, 03:56 AM

Quote:

Originally Posted by Spooler

Don't worry, they are stealing your intercooler (CAC) for me since I am such a great customer. LOL

...lol... The CJM I/C is so big (deep) that MA had to fabricate a one~off crash bar to clear it.

URBiN~HURMiT · 01-09-2019, 08:36 PM

Quote:

Originally Posted by gbrettin

Deal. I'm shooting for 8's and I'm not exclusively gunning for a drag car.

Holy Crap Batman

Spooler · 01-09-2019, 10:21 PM

What is everyone using for motor mounts. I forgot all about them.

jwick · 01-09-2019, 11:37 PM

Quote:

Originally Posted by Spooler

What is everyone using for motor mounts. I forgot all about them.

I was going to go with Z1 but I also forgot about them until after I installed the kit, so I skipped it.

URBiN~HURMiT · 01-09-2019, 11:44 PM

Quote:

Originally Posted by Spooler

What is everyone using for motor mounts. I forgot all about them.

I went with the Z1 solids ... I'm figuring I need to shake my molars loose
(I did go with the urethane transmission and diff bushings)

phunk · 01-10-2019, 02:40 PM

Z1 mounts are solid (pun intended

). I ran them forever in my Z. There are also some new ones on the scene that are interesting <shrug>

Hotrodz · 01-10-2019, 03:20 PM

Quote:

Originally Posted by Spooler

What is everyone using for motor mounts. I forgot all about them.

I run Z1 solid mounts and the urethane transmission mount. I didn't notice any real increase in vibration. I think you get more vibration in you use a solid trans mount with it.

01-08-2019, 07:01 PM	#514 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Well, the machine shop is aholes and elbows on my motor. Got 2 guys working on it. John worked his magic and got them motivated. My turbo's are shipping out from Fast Intentions today also. Moving along now. gbrettin, jwick, Rusty and 5 others like this.

01-10-2019, 02:40 PM	#524 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	Z1 mounts are solid (pun intended ). I ran them forever in my Z. There are also some new ones on the scene that are interesting <shrug> Rusty, Hotrodz, madwi and 6 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM

01-08-2019, 04:22 PM	#513 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,284 Drives: Tricycle Rep Power: 589151	Yeah. It might be a one and done deal. Sent from my SM-G930P using Tapatalk

01-09-2019, 10:21 PM	#521 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	What is everyone using for motor mounts. I forgot all about them.