Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 11-24-2018, 04:39 PM

Phunk's friends (Can't remember his user name) car made 818hp at 18.5lbs of boost on a dynojet with his tubular exhaust headers and GT3076 snails. I am very curious to see how mine does.

Spooler · 11-24-2018, 04:49 PM

Here his build is.

700whp with ease

He also has the 1/4 record at the moment.

CJM (Justin's) drag build

Spooler · 11-24-2018, 05:28 PM

The more I look at Streetz's dyno graphs I think we have a restriction on the exhaust side. I wish someone would measure the restriction in the exhaust manifold compared to the boost psi. This would tell us the ratio of backpressure to boost pressure. When it get's out of whack and is not keep close to a 1:1 ratio bad things will happen. Phunks's tubular exhaust manifold and his turbo size/exhaust housing AR must be on point to have made what it did on only 18.5 psi of boost on a stock engine. There is something to learn here. The more HP you can make on lower boost pressure is a big positive.

Spooler · 11-24-2018, 06:15 PM

Well crap. I looked up the Stage 2 Xona Rotor turbo's and they are only good for 800hp at the crank. At a 15% drivetrain loss that would be 680hp at the wheel. On the mainline dyno this would mean only 564hp at the wheel. Looks like I will be 86hp short at the wheel. We shall see if my calculations are correct. Not sure if I want to react and get 2 bigger turbo's or just stick with what I have.

Spooler · 11-24-2018, 06:32 PM

I need to think about this.

Rusty · 11-24-2018, 08:11 PM

Quote:

Originally Posted by URBiN~HURMiT

USAF 1966 ~ 1970
Nakhon Phanom RTAFB SEA '69 ~ '70

yep, I'm'a old guy

In your early 70's?

jchammond · 11-24-2018, 08:12 PM

Quote:

Originally Posted by Spooler

I need to think about this.

Do It!

Sent from my iPad using Tapatalk

Spooler · 11-24-2018, 08:25 PM

How the heck did Streetz make 818hp on only 18.5lbs of boost and a stock block. Seb had to make it happen via timing. I am scratching my head on this one.

jchammond · 11-24-2018, 08:34 PM

Definitely had some good ethanol fuel in system; notice AFR readings

Spooler · 11-24-2018, 08:56 PM

Quote:

Originally Posted by jchammond

Definitely had some good ethanol fuel in system; notice AFR readings

There is way more to it than that. Most folks are having to run in the 20psi of boost or more to make in the 800hp range.

Spooler · 11-24-2018, 08:58 PM

Quote:

Originally Posted by URBiN~HURMiT

Just found this thread ... haven't read all the way through it yet but will offer this post for now.
My car is at MA-Motorsports as well.
They built the sleeved block with their design 11:1 CR Pistons and Carrillo H Rods.
JW Stage 2 exhaust cams.
CJM Stage 2 Fuel Rails
CJM Twin 450 Fuel Pumpsl
CJM Intercooler
E-85 flex fue
AAM Stage 2 EFR 71/63 Turbos with external waste gates
AAM upper intake
AAM oil pan
Ecutek Tune
Quaife LSD with MA-M diff cooler
OS Giken twin disc clutch

Dyno'd at 667 rwhp on their Mainline Dyno which reads 17% less than the more common Dyno Jet.
This translated to 780 rwhp on a DynoJet
Calculating BHP using Fuel Flow it came up to 1K BHP. (this factors out to 850 rwhp with a 15% hp loss due to the drivetrain)

4 boost settings on the EVC6 controller = 13 psi spring pressure | 16 psi | 20 psi | 25 psi |
My goal was 800 to 850 rwhp so I'm happy with that. The car is still streetable and reliable.

I did go down to test drive the car a few weeks ago to shake it down and find the little bugs that need attention.

The car is awesome so far - but the turbo's smoke due to poor oil drain - the location and angle of the drain from the turbo's into the oil pan does't allow for sufficient (gravity) drainage.

MA-M will have the car for a little while longer to fix that and to put in a roll bar.

Will be following your build with Great Interest !!!

How much boost did it take to run the 667 rwhp? Your highest of 25psi?

URBiN~HURMiT · 11-25-2018, 12:39 AM

Quote:

Originally Posted by Rusty

In your early 70's?

Turning 71 right after Christmas ... and you ?

URBiN~HURMiT · 11-25-2018, 01:16 AM

Quote:

Originally Posted by Spooler

How much boost did it take to run the 667 rwhp? Your highest of 25psi?

Carl told me that was the threshhold where hp increase fell off substantially.
They stopped increasing the boost when there was less than 10 hp increase per pound of boost.
He said that both the turbos and the fuel were maxed out...so it is what it is.
Forgot to mention that I'm running the ID 1300's (functioning at 85% duty cylce) since it will primarily be a pump gas car (few E-85 stations close by me in N.J.)
I probably won't have the opportunity to run it at 25 psi too often.

I will inquire about the specifics on the boost near the end of the week when I check on the progress... I'm more interested in getting the car finished up - the small details can be time consuming.

Since Daelen left a few months ago (he was the go-to guy) and they've moved to a new space in the same complex - the workload has increased and info has been slower in coming. Jon is now wearing a couple of more hats.

They did a dyno run before and after the installation of the CJM Intercooler but that was a few months apart but the results were pretty much the same on the E-85.

As Ray has always said - don't worry about the numbers - the proof is in how it drives.

javi370z · 11-25-2018, 01:51 AM

Quote:

Originally Posted by Spooler

Well crap. I looked up the Stage 2 Xona Rotor turbo's and they are only good for 800hp at the crank. At a 15% drivetrain loss that would be 680hp at the wheel. On the mainline dyno this would mean only 564hp at the wheel. Looks like I will be 86hp short at the wheel. We shall see if my calculations are correct. Not sure if I want to react and get 2 bigger turbo's or just stick with what I have.

I’m on the stock motor still with the stage 2 fast intentions kit. Made 717 on 16psi. Turbos still have more left. You should be alright.

Rusty · 11-25-2018, 02:57 AM

Quote:

Originally Posted by URBiN~HURMiT

Turning 71 right after Christmas ... and you ?

62

11-24-2018, 04:39 PM	#376 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,835 Drives: 2013 Nismo 370z Rep Power: 2684392	Phunk's friends (Can't remember his user name) car made 818hp at 18.5lbs of boost on a dynojet with his tubular exhaust headers and GT3076 snails. I am very curious to see how mine does. Last edited by Spooler; 11-24-2018 at 09:24 PM.

11-24-2018, 04:49 PM	#377 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,835 Drives: 2013 Nismo 370z Rep Power: 2684392	Here his build is. 700whp with ease He also has the 1/4 record at the moment. CJM (Justin's) drag build Last edited by Spooler; 11-24-2018 at 09:26 PM.

11-24-2018, 05:28 PM	#378 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,835 Drives: 2013 Nismo 370z Rep Power: 2684392	The more I look at Streetz's dyno graphs I think we have a restriction on the exhaust side. I wish someone would measure the restriction in the exhaust manifold compared to the boost psi. This would tell us the ratio of backpressure to boost pressure. When it get's out of whack and is not keep close to a 1:1 ratio bad things will happen. Phunks's tubular exhaust manifold and his turbo size/exhaust housing AR must be on point to have made what it did on only 18.5 psi of boost on a stock engine. There is something to learn here. The more HP you can make on lower boost pressure is a big positive. Rusty and URBiN~HURMiT like this. Last edited by Spooler; 11-24-2018 at 05:30 PM.

11-24-2018, 06:15 PM	#379 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,835 Drives: 2013 Nismo 370z Rep Power: 2684392	Well crap. I looked up the Stage 2 Xona Rotor turbo's and they are only good for 800hp at the crank. At a 15% drivetrain loss that would be 680hp at the wheel. On the mainline dyno this would mean only 564hp at the wheel. Looks like I will be 86hp short at the wheel. We shall see if my calculations are correct. Not sure if I want to react and get 2 bigger turbo's or just stick with what I have. jchammond likes this. Last edited by Spooler; 11-24-2018 at 06:53 PM.

11-24-2018, 06:32 PM	#380 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,835 Drives: 2013 Nismo 370z Rep Power: 2684392	I need to think about this. jchammond likes this.

11-24-2018, 08:25 PM	#383 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,835 Drives: 2013 Nismo 370z Rep Power: 2684392	How the heck did Streetz make 818hp on only 18.5lbs of boost and a stock block. Seb had to make it happen via timing. I am scratching my head on this one.

11-24-2018, 08:34 PM	#384 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Definitely had some good ethanol fuel in system; notice AFR readings __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM