Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 03-14-2018, 08:04 AM

I am getting 3 things from all of this.
One: There is a limit around 800hp that is causing a head gasket sealing problem.
Two: Several folks have had the issue but there has not been much talk on the forum
about it.
Three: I need to consider lowering my power goals for longevity/reliability.

Rid3_FaM0uS · 03-14-2018, 10:16 AM

I mean if we’re being honest there are several possible reasons we don’t hear much about it. 1st and foremost being the lack of cars in that power range. I would wager someone a good $1000 that there is, absolutely, no more than 20-25 800+whp z34/g37 VQ37 powered cars in the entirety of the world currently. The people who are there most of them likely tight lipped or shop builds(which often times leaves owners out of the loop if they aren’t familiar with engine building/failures). Two(which happened to be my case) no one wants to build this engine 10 times over, failure after failure, scratching your head wondering where the hell youre going wrong; when you’re doing everything the way it should be. Most people driven that far would probably just give up anyway. Another reason being the shops that are aware of this don’t want to share the secret. If you’re always giving away what you know then it becomes increasingly hard to stay one step ahead. Sounds selfish, but it’s business. I happen to have learned the hard way whilst staying dedicated. I would just hate to see someone else wind up on the same path, when for a small fee of $1500(which was about the average cost of each of the 7 or 8 initial times I rebuilt the motor), you can have an insurance that 110% prevents you from this. My high compression 930whp RJM closed deck engine was running like a champ when it let go, and there’s not a doubt in my mind at all that it would still be going strong had I not suffered severe con rod failures that led to a total loss of the engine.

jchammond · 03-14-2018, 10:25 AM

I agree with "Tight-Lip" on above statement,,,been going on for well over 1/2 century in engine builds.

Spooler · 03-14-2018, 10:35 AM

Quote:

Originally Posted by Rid3_FaM0uS

I mean if we’re being honest there are several possible reasons we don’t hear much about it. 1st and foremost being the lack of cars in that power range. I would wager someone a good $1000 that there is, absolutely, no more than 20-25 800+whp z34/g37 VQ37 powered cars in the entirety of the world currently. The people who are there most of them likely tight lipped or shop builds(which often times leaves owners out of the loop if they aren’t familiar with engine building/failures). Two(which happened to be my case) no one wants to build this engine 10 times over, failure after failure, scratching your head wondering where the hell youre going wrong; when you’re doing everything the way it should be. Most people driven that far would probably just give up anyway. Another reason being the shops that are aware of this don’t want to share the secret. If you’re always giving away what you know then it becomes increasingly hard to stay one step ahead. Sounds selfish, but it’s business. I happen to have learned the hard way whilst staying dedicated. I would just hate to see someone else wind up on the same path, when for a small fee of $1500(which was about the average cost of each of the 7 or 8 initial times I rebuilt the motor), you can have an insurance that 110% prevents you from this. My high compression 930whp RJM closed deck engine was running like a champ when it let go, and there’s not a doubt in my mind at all that it would still be going strong had I not suffered severe con rod failures that led to a total loss of the engine.

So what are you doing now? Giving up or going to do it one more time at a lower power level?
Thanks for the heads up. I would be aggravated to say the least.

Spooler · 03-14-2018, 11:32 AM

All I have to say is "I am in good hands". I am sticking with the plan. The car makes what it makes.

Rid3_FaM0uS · 03-14-2018, 12:32 PM

Quote:

Originally Posted by Spooler

So what are you doing now? Giving up or going to do it one more time at a lower power level?
Thanks for the heads up. I would be aggravated to say the least.

Remember that rabbit hole the guys kept telling you about? You can find me down there.
Way.
Way.
Down there (if you know what I mean). Until I no longer have the desire to do so... I will ALWAYS push this platform. Further, bigger, badder.

Hotrodz · 03-14-2018, 01:13 PM

Quote:

Originally Posted by Rid3_FaM0uS

Remember that rabbit hole the guys kept telling you about? You can find me down there.
Way.
Way.
Down there (if you know what I mean). Until I no longer have the desire to do so... I will ALWAYS push this platform. Further, bigger, badder.

The rabbit hole is full of shiny things and I like shiny things. I tell my self no but they have power over me. Unfortunately I think Rusty is right, I will be done when there is no more money.

Sent from my SM-N910P using Tapatalk

Spooler · 03-14-2018, 01:28 PM

A little birdy told me that the 1/2 mile record is still 156mph set by SOHO Motorsports. I may have to go to Wanno go Fast in Clayton, Ga. and see what I can do when this is done.

Spooler · 03-14-2018, 01:29 PM

Quote:

Originally Posted by Hotrodz

The rabbit hole is full of shiny things and I like shiny things. I tell my self no but they have power over me. Unfortunately I think Rusty is right, I will be done when there is no more money.

Sent from my SM-N910P using Tapatalk

I like shinny things.

cv129 · 03-14-2018, 01:37 PM

On the bright side, Z being 10 yrs young, it's a great feeling to see many owners still producing these high quality builds.

Spooler · 03-14-2018, 01:44 PM

Quote:

Originally Posted by cv129

On the bright side, Z being 10 yrs young, it's a great feeling to see many owners still producing these high quality builds.

You mean, "There are still a few nutjobs doing crazy crap".

Spooler · 03-14-2018, 02:11 PM

Quote:

Originally Posted by Spooler

A little birdy told me that the 1/2 mile record is still 156mph set by SOHO Motorsports. I may have to go to Wanno go Fast in Clayton, Ga. and see what I can do when this is done.

I do not see an event in Ga. this year yet. I do see one in Ocala, Fl. which is closer for me.

https://wannagofast.com/?post_type=event&p=845

EZT · 03-14-2018, 02:25 PM

Quote:

Originally Posted by Spooler

I do not see an event in Ga. this year yet. I do see one in Ocala, Fl. which is closer for me.

https://wannagofast.com/?post_type=event&p=845

Only 30 minutes from me. I’ll have to go spectate.

phunk · 03-14-2018, 02:48 PM

IMHO the reasons the industry is tight lipped is owner pride or allegiance, and perpetually more impossible consumer expectations. The reality versus the perceived reality are 2 very different things. Building your engine and going for 1000+ hp is a lifestyle choice. Lots of exciting marketing and media on the internet is aimed to make it look like its all winning and high fives. All I can say is, saddle up folks.

Rusty · 03-14-2018, 02:49 PM

When I was running my '78 Trans Am. I went through 4 Pontiac 400 motors. I was trying to increase the power level each time, but only to find the next weak point. Not too many people at the time was sharing or willing to share info on how to keep the motor together. So after 4 motors. I switched to big block chevy. Problems solved.

03-14-2018, 08:04 AM	#76 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	I am getting 3 things from all of this. One: There is a limit around 800hp that is causing a head gasket sealing problem. Two: Several folks have had the issue but there has not been much talk on the forum about it. Three: I need to consider lowering my power goals for longevity/reliability. Rusty, Rid3_FaM0uS and Hotrodz like this.

03-14-2018, 10:16 AM	#77 (permalink)
Rid3_FaM0uS Track Member Join Date: Apr 2012 Location: Wapakoneta, Ohio Posts: 506 Drives: 2011 BS Nismo 370z Rep Power: 44	I mean if we’re being honest there are several possible reasons we don’t hear much about it. 1st and foremost being the lack of cars in that power range. I would wager someone a good $1000 that there is, absolutely, no more than 20-25 800+whp z34/g37 VQ37 powered cars in the entirety of the world currently. The people who are there most of them likely tight lipped or shop builds(which often times leaves owners out of the loop if they aren’t familiar with engine building/failures). Two(which happened to be my case) no one wants to build this engine 10 times over, failure after failure, scratching your head wondering where the hell youre going wrong; when you’re doing everything the way it should be. Most people driven that far would probably just give up anyway. Another reason being the shops that are aware of this don’t want to share the secret. If you’re always giving away what you know then it becomes increasingly hard to stay one step ahead. Sounds selfish, but it’s business. I happen to have learned the hard way whilst staying dedicated. I would just hate to see someone else wind up on the same path, when for a small fee of $1500(which was about the average cost of each of the 7 or 8 initial times I rebuilt the motor), you can have an insurance that 110% prevents you from this. My high compression 930whp RJM closed deck engine was running like a champ when it let go, and there’s not a doubt in my mind at all that it would still be going strong had I not suffered severe con rod failures that led to a total loss of the engine. GeauxTigers1, Rusty, Hotrodz and 3 others like this. __________________ Always under construction. . .

03-14-2018, 10:25 AM	#78 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	I agree with "Tight-Lip" on above statement,,,been going on for well over 1/2 century in engine builds. Rusty, Rid3_FaM0uS, Hotrodz and 1 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

03-14-2018, 11:32 AM	#80 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	All I have to say is "I am in good hands". I am sticking with the plan. The car makes what it makes. Last edited by Spooler; 03-14-2018 at 11:46 AM.

03-14-2018, 01:28 PM	#83 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	A little birdy told me that the 1/2 mile record is still 156mph set by SOHO Motorsports. I may have to go to Wanno go Fast in Clayton, Ga. and see what I can do when this is done. Rusty, Hotrodz and jchammond like this.

03-14-2018, 01:37 PM	#85 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,236 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	On the bright side, Z being 10 yrs young, it's a great feeling to see many owners still producing these high quality builds. Rusty and Hotrodz like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

03-14-2018, 02:48 PM	#89 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	IMHO the reasons the industry is tight lipped is owner pride or allegiance, and perpetually more impossible consumer expectations. The reality versus the perceived reality are 2 very different things. Building your engine and going for 1000+ hp is a lifestyle choice. Lots of exciting marketing and media on the internet is aimed to make it look like its all winning and high fives. All I can say is, saddle up folks. Rid3_FaM0uS, Hotrodz, Ghostvette and 1 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

03-14-2018, 02:49 PM	#90 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,218 Drives: 2011 Nismo GM 6M Rep Power: 2684438	When I was running my '78 Trans Am. I went through 4 Pontiac 400 motors. I was trying to increase the power level each time, but only to find the next weak point. Not too many people at the time was sharing or willing to share info on how to keep the motor together. So after 4 motors. I switched to big block chevy. Problems solved. Hotrodz likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html Last edited by Rusty; 03-14-2018 at 02:53 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM