Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 03-06-2018, 09:48 PM

Quote:

Originally Posted by jchammond

Don’t Destroy MA’s Dyno!

Sent from my iPad using Tapatalk

LOL, you know who your daddy is. Sleeping outside at Zdayz ain't no fun.

Spooler · 03-06-2018, 11:03 PM

Quote:

Originally Posted by Hotrodz

I have been boosted for about 4.5 years and I have about 55K on the motor and about 35k boosted. You know how I drive...a lot like you. She does not get babied. I am torn with the same thinking do I build sooner than later knowing there is good life in the motor but 35k miles boosted with a few thousand at the track well I would say the motor is like 75 or 80K. I would say if you got the cash do it now and be done. Doing it later just mean more money and down time. Just my two cent.

The bad part comes if you pop the motor. The old one is junk. So, one low mileage junk yard long block for 2 to 3k. It is best to swap out all of your electronics to said motor after it is built. Two turbo rebuilds for good measure just in case metal shrapnel made it to them. CAC cleaning. It will be 7 to 10k more expensive if that happens. Sometimes, that is the game we play and the risks we take.

Hotrodz · 03-06-2018, 11:15 PM

Quote:

Originally Posted by Spooler

The bad part comes if you pop the motor. The old one is junk. So, one low mileage junk yard long block for 2 to 3k. It is best to swap out all of your electronics to said motor after it is built. Two turbo rebuilds for good measure just in case metal shrapnel made it to them. CAC cleaning. It will be 7 to 10k more expensive if that happens. Sometimes, that is the game we play and the risks we take.

Yup, you pretty much nailed it!

Sent from my SM-N910P using Tapatalk

Rusty · 03-06-2018, 11:21 PM

While you're at it. Bigger throttle bodies.

Spooler · 03-06-2018, 11:25 PM

Quote:

Originally Posted by Rusty

While you're at it. Bigger throttle bodies.

With an FI engine I think they are a waste of money. A goal of over 1k hp, then yeah. When you get to that point, maximum boost becomes an issue so you are trying to find ways to reduce the restriction, hence reduces the max psi of boost. That is where the learning curve is at now days with several folks over 800hp. Good luck to them.

Spooler · 03-06-2018, 11:31 PM

Does anyone know when you need to swap out the crank to a Bryant racing Forged crank? That level has got to be somewhere between 800 to 900hp.

cupcakez · 03-07-2018, 12:22 AM

Quote:

Originally Posted by Spooler

Does anyone know when you need to swap out the crank to a Bryant racing Forged crank? That level has got to be somewhere between 800 to 900hp.

Why not just buy a BC kit that is rated 1000 whp++?

SS_Firehawk · 03-07-2018, 12:39 AM

That Bryant Racing crank would snap the BC kit in half without much effort. Those cranks will spin to the moon and hold all the power you could throw at it. Hence why they cost upwards of $5000

Spooler · 03-07-2018, 01:00 AM

Quote:

Originally Posted by cupcakez

Why not just buy a BC kit that is rated 1000 whp++?

Because a BC kit is not good enough for me. Bryant cranks are expensive because they work.

Spooler · 03-07-2018, 01:02 AM

Quote:

Originally Posted by SS_Firehawk

That Bryant Racing crank would snap the BC kit in half without much effort. Those cranks will spin to the moon and hold all the power you could throw at it. Hence why they cost upwards of $5000

You forgot the 3 month wait to boot.

Rusty · 03-07-2018, 01:07 AM

Quote:

Originally Posted by SS_Firehawk

That Bryant Racing crank would snap the BC kit in half without much effort. Those cranks will spin to the moon and hold all the power you could throw at it. Hence why they cost upwards of $5000

I believe Doran Racing was using Bryant cranks in their race motors.

Spooler · 03-07-2018, 01:11 AM

Quote:

Originally Posted by Rusty

I believe Doran Racing was using Bryant cranks in their race motors.

Yes, with a dry sump setup.

Elmo370z · 03-07-2018, 03:04 AM

Looks similar to my parts list. Good luck with the build. I stare at all my parts everyday sucks balls.

Elmo370z · 03-07-2018, 03:07 AM

Quote:

Originally Posted by Spooler

Does anyone know when you need to swap out the crank to a Bryant racing Forged crank? That level has got to be somewhere between 800 to 900hp.

MaMotorsports told me anything over 800whp. I went to the shop to put a down payment on a BR billet crank.

Hotrodz · 03-07-2018, 09:29 AM

Quote:

Originally Posted by Elmo370z

MaMotorsports told me anything over 800whp. I went to the shop to put a down payment on a BR billet crank.

I called Bryant Racing yesterday and the guy I talked to didn't no chit. I asked him about a crank for a vq34 and he had no idea what I was talking about he said they had ones available for vq35 and vq37. He said the cost was around $3k.

I think if you are wanting to rev 8k or above for more than a quarter mile run you need to upgrade your crank. If you are going to run on the street, I don't know if a crank upgrade is really all that necessary. From what I have seen of all the plus 900whp builds, many other things fail before you get to the crank being a limiting factor. The number issue has been extreme heat and the upper manifold failing at or over 22 to 23 psi.

03-06-2018, 11:21 PM	#19 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,190 Drives: 2011 Nismo GM 6M Rep Power: 2684437	While you're at it. Bigger throttle bodies. Hotrodz likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

03-07-2018, 12:39 AM	#23 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	That Bryant Racing crank would snap the BC kit in half without much effort. Those cranks will spin to the moon and hold all the power you could throw at it. Hence why they cost upwards of $5000 __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

03-07-2018, 03:04 AM	#28 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Looks similar to my parts list. Good luck with the build. I stare at all my parts everyday sucks balls. JARblue, SS_Firehawk, Hotrodz and 4 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM

03-06-2018, 11:31 PM	#21 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Does anyone know when you need to swap out the crank to a Bryant racing Forged crank? That level has got to be somewhere between 800 to 900hp.