Nissan 370Z Forum
Page 43 of 376 « First 334142 43 44455393143 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Fast Intentions Stage 2 TT build by MA-Motorsports. (http://www.the370z.com/forced-induction/126104-fast-intentions-stage-2-tt-build-ma-motorsports.html)

solidus 01-26-2019 12:11 AM
I know Marc. Remember when he first moved to Orlando.

Spooler 01-26-2019 01:25 AM
If you know him, get him to make a billet VQ37 block. Just sayin.

solidus 01-26-2019 10:25 PM
Quote:
Originally Posted by Spooler (Post 3818974)
If you know him, get him to make a billet VQ37 block. Just sayin.
Lol! Last time I saw Mark he had a small Fab shop and had just EASd from the Marines. Then he blew up. From what I know they can build VQs but their billet stuff is pricey. That said I may end up driving over.

Spooler 01-26-2019 10:38 PM
Quote:
Originally Posted by solidus (Post 3819199)
Lol! Last time I saw Mark he had a small Fab shop and had just EASd from the Marines. Then he blew up. From what I know they can build VQs but their billet stuff is pricey. That said I may end up driving over.
They make a VQ35 billet block. I am not sure if it is a wet block or not.

URBiN~HURMiT 01-26-2019 11:57 PM
Quote:
Originally Posted by solidus (Post 3818844)
External with the BP kit.
The reason I asked was that AAM had problems with the Tune - Ecutek - and Flex Fuel - then they blew the motor.
MA-Motorsports also had a problem with making the tune work - boost spikes and boost creep - so they went with external waste gates and external boost controller.
This effectively eliminated the automatically compensating Flex Fuel tune.
It ended up being a major loss of time and money.

Spooler 01-27-2019 12:21 PM
Quote:
Originally Posted by URBiN~HURMiT (Post 3819208)
The reason I asked was that AAM had problems with the Tune - Ecutek - and Flex Fuel - then they blew the motor.
MA-Motorsports also had a problem with making the tune work - boost spikes and boost creep - so they went with external waste gates and external boost controller.
This effectively eliminated the automatically compensating Flex Fuel tune.
It ended up being a major loss of time and money.
I have had issues before with internal wastegates. Boost creep and boost spikes also. Internal wastegates suck.

Spooler 01-27-2019 06:53 PM
I may have to put my stock wheels and tires on before I take the car north. R888r's aren't gonna like the cold.

solidus 01-27-2019 07:01 PM
Quote:
Originally Posted by Spooler (Post 3819377)
I may have to put my stock wheels and tires on before I take the car north. R888r's aren't gonna like the cold.
It doesn't really get that cold here in Orlando but what I can tell you is that they dont like to act right in anything under 50 degrees or so.

Spooler 01-27-2019 07:25 PM
Quote:
Originally Posted by solidus (Post 3819383)
It doesn't really get that cold here in Orlando but what I can tell you is that they dont like to act right in anything under 50 degrees or so.
RE11's don't like it either. I am use to that. I am worried about the temps getting below 20deg. When I read the spec sheet for the R888r's, the tread will crack if it get's below 15 deg. They have to be set inside for a day or two above 68 deg. The poor guys at MA's shop are dealing with 38 deg's in the shop with heaters blaring. Those guys are freezing. It's cold as heck up there right now.

Spooler 01-27-2019 07:26 PM
Yeah, I am stressing.... LOL

Link to the pdf.

https://www.tirerack.com/images/pdf/...eStorage-6.pdf

Hotrodz 01-27-2019 07:47 PM
It's not that cold here but I have a set of new tires in our spare bed room lol.

Sent from my SM-G965U using Tapatalk

Rusty 01-27-2019 07:48 PM
Quote:
Originally Posted by Spooler (Post 3819405)
RE11's don't like it either. I am use to that. I am worried about the temps getting below 20deg. When I read the spec sheet for the R888r's, the tread will crack if it get's below 15 deg. They have to be set inside for a day or two above 68 deg. The poor guys at MA's shop are dealing with 38 deg's in the shop with heaters blaring. Those guys are freezing. It's cold as heck up there right now.
This Wednesday. It's going to be below zero. It's going to be close for them. Brrrr.

Spooler 01-28-2019 10:04 PM
Just ordered the Z1 Bell Raceworks diff brace.

Rusty 01-28-2019 10:05 PM
Quote:
Originally Posted by Spooler (Post 3819814)
Just ordered the Z1 Bell Raceworks diff brace.
Mine should be here this week. :tup:

Hotrodz 01-28-2019 10:11 PM
Quote:
Originally Posted by Rusty (Post 3819815)
Mine should be here this week. :tup:
Ha ha you guys are going to make me spend money.

Sent from my SM-G965U using Tapatalk


All times are GMT -5. The time now is 02:10 AM.
Page 43 of 376 « First 334142 43 44455393143 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2