Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Fast Intentions Stage 2 TT build by MA-Motorsports. (http://www.the370z.com/forced-induction/126104-fast-intentions-stage-2-tt-build-ma-motorsports.html)

Spooler 05-20-2022 06:41 PM

Sneak peak....

http://www.youtube.com/watch?v=p8eDnkjL2V4

Spooler 05-20-2022 06:49 PM

A little more.

http://www.youtube.com/watch?v=iduAqKqiQXs

Spooler 05-20-2022 07:04 PM

Enjoy.... Our kit is in the works.

http://www.youtube.com/watch?v=4QZLggq8AcY

Spooler 05-20-2022 07:14 PM

Last one. Good info so I figured I would share all of these. They are not cheap but I have had no brakes at a buck twenty, it is no fun.

http://www.youtube.com/watch?v=SQjq26iDABg

Spooler 05-21-2022 04:43 PM

Quote:

Originally Posted by phunk (Post 4024300)
Those pumps have a 3/8 output barb, so they use a 3/8 I.D. hose

Just got around to placing my order for what I need.

Spooler 06-05-2022 07:38 PM

Still enjoying my Antigravity battery and Battery tracker. It makes it so much easier to keep track of the battery without doing much at all.

Spooler 06-11-2022 02:59 PM

Hey Nissan, Build one of these.

http://www.youtube.com/watch?v=1_I7pQ4s8_g

Spooler 06-20-2022 11:58 PM

Still got my :drama:out watching the show.

Spooler 07-01-2022 02:57 PM

I have all my data gathered up. I know exactly what I need to do. The question is, do I want too. Still thinking on that. Sometimes you have to fail to be successful. If you think success is easy, it is not. It's a battle to see what your made of and if you can learn quickly from your mistakes.

Spooler 07-01-2022 02:59 PM

If people weren't such A-Holes I would post my data but, that's not going to happen.

Spooler 07-03-2022 10:57 PM

Phunk, finally had time to take the fuel pump assembly out. The fuel level issue was due to the level assembly falling off the surge tank. I made sure it clicked in this time. I also found I had a grounding issue when checking grounds with my VOM. I moved the fuel pump grounds to the pump assembly that bolts to the top hat. I had to sand off the anodized coating to ensure I was getting a good ground. Only other thing I found is one of my fuel pump positives fell out in my hands. I wired in the new pigtails so if I need to replace the pumps in the future, It will be simple. I did install the new pumps, No since in not doing it while I was there. Thanks for the help.

Spooler 07-05-2022 06:39 PM

Just poking a little fun. LOL

http://www.youtube.com/watch?v=AQXVHITd1N4

Spooler 07-07-2022 12:43 PM

Well, I never got my intake spacer for my SOHO intake manifold. I have been patient and asked 15 times. I'm not asking any more. Not happy. They could have just made it correctly from the start where I didn't need a spacer. I started and got the group buy together after all.

Spooler 07-07-2022 12:56 PM

Buy the way. I didn't get any favors when SOHO installed the coolant pressure sensor in my car. The dang thing has been throwing O2 codes for low voltage on the passenger side sensor 1 since I got the car back. I can't even drive it. Missing, skipping,etc. I will just leave it at that. I have been trying to be nice. Well, forget that. Not being nice anymore.

Spooler 07-07-2022 01:03 PM

I should have went back to MA-Motorsports to get my work done. Then, let Vince at RT Tuning re-tune it. Last year was a complete bust. Oh well, live and learn.


All times are GMT -5. The time now is 04:28 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2