Fast Intentions Stage 2 TT build by MA-Motorsports.

Rusty · 06-30-2021, 01:47 PM

Quote:

Originally Posted by Spooler

At this level, I want to make one change at a time to see what happens. Way too much unknown. Now everyone will know the FI intercooler is only good for around 25psi of boost. 900whp.

With what you're posting, and being open about it. I know for sure that a person with a white Z never made 1,000 as he says.

Spooler · 06-30-2021, 01:51 PM

Quote:

Originally Posted by Rusty

With what you're posting, and being open about it. I know for sure that a person with a white Z never made 1,000 as he says.

Oh, we could have went and got ice and chunked it all over the motor and intercooler. I could have made it but this exercise is not all about the number. I have to be able to use it for 1/2 mile. I prefer to keep my 2nd engine in one piece. LOL

Spooler · 06-30-2021, 01:57 PM

I am looking at my dyno graphs now. Right at 30psi of boost. It should have made 1025whp but it didn't. Not even close. Hot air kills power.

Wuero370z · 06-30-2021, 02:03 PM

Quote:

Originally Posted by Spooler

I am looking at my dyno graphs now. Right at 30psi of boost. It should have made 1025whp but it didn't. Not even close. Hot air kills power.

Think you coulda done meth and woulda brought temp down without a new IC?

Sent from my iPhone using Tapatalk

Spooler · 06-30-2021, 02:05 PM

Quote:

Originally Posted by Wuero370z

Think you coulda done meth and woulda brought temp down without a new IC?

Sent from my iPhone using Tapatalk

Noop, it would have just put a bandaid on it. It wasn't even close to keeping her cool.

redondoaveb · 06-30-2021, 02:08 PM

Quote:

Originally Posted by Spooler

SOHO is fabbing a new one right now.

No wonder George hasn't replied to my email

Are you going with a Bell core?

redondoaveb · 06-30-2021, 02:11 PM

Quote:

Originally Posted by Spooler

At this level, I want to make one change at a time to see what happens. Way too much unknown. Now everyone will know the FI intercooler is only good for around 25psi of boost. 900whp.

Well, I'll be good then

Hotrodz · 06-30-2021, 02:21 PM

Quote:

Originally Posted by Spooler

At this level, I want to make one change at a time to see what happens. Way too much unknown. Now everyone will know the FI intercooler is only good for around 25psi of boost. 900whp.

Things to consider for 1000whp: head gasket fix before everything else, upper manifold upgrade, intercooler and IC piping upgrade and turbo limitation. That said the FI intercooler is just fine up to 900whp.

Sent from my SM-G965U using Tapatalk

Spooler · 06-30-2021, 02:33 PM

Quote:

Originally Posted by Hotrodz

Things to consider for 1000whp: head gasket fix before everything else, upper manifold upgrade, intercooler and IC piping upgrade and turbo limitation. That said the FI intercooler is just fine up to 900whp.

Sent from my SM-G965U using Tapatalk

LOL, my turbo's may be out too. Deal with that later if that is the case. Can always turn it back down.

Spooler · 06-30-2021, 02:33 PM

Quote:

Originally Posted by redondoaveb

No wonder George hasn't replied to my email

Are you going with a Bell core?

He is trying to help a brother out and make sure he makes his event.

Spooler · 06-30-2021, 02:34 PM

Already have my old intercooler sold.

redondoaveb · 06-30-2021, 02:46 PM

Quote:

Originally Posted by Spooler

He is trying to help a brother out and make sure he makes his event.

His ears must have been burning, I just received an email from him. But, yeah, I'd rather he help you first, my request is low priority.

Spooler · 06-30-2021, 02:51 PM

Mazworx engine is hanging in there. First one to be tested like this. I hope all is good at the end of all this. Damn sure makes me nervous.

Spooler · 06-30-2021, 03:02 PM

Mazworx has built a DE like mine and made 1200whp. I should be good to go.

Spooler · 06-30-2021, 03:23 PM

Quote:

Originally Posted by redondoaveb

Are you going with a Bell core?

It will be the same core/ Intercooler they run on their drag car which is a Bell core. They have Garretts in stock, but I will go with what has been working for them.

06-30-2021, 01:57 PM	#3918 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,788 Drives: 2013 Nismo 370z Rep Power: 2684392	I am looking at my dyno graphs now. Right at 30psi of boost. It should have made 1025whp but it didn't. Not even close. Hot air kills power. FL 4Motion, Mr.Squeeze, Rusty and 3 others like this.

06-30-2021, 02:34 PM	#3926 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,788 Drives: 2013 Nismo 370z Rep Power: 2684392	Already have my old intercooler sold. FL 4Motion, Mr.Squeeze, JARblue and 4 others like this.

06-30-2021, 02:51 PM	#3928 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,788 Drives: 2013 Nismo 370z Rep Power: 2684392	Mazworx engine is hanging in there. First one to be tested like this. I hope all is good at the end of all this. Damn sure makes me nervous. FL 4Motion, Mr.Squeeze, Rusty and 3 others like this.

06-30-2021, 03:02 PM	#3929 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,788 Drives: 2013 Nismo 370z Rep Power: 2684392	Mazworx has built a DE like mine and made 1200whp. I should be good to go. FL 4Motion, Mr.Squeeze, Rusty and 3 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM