Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 07-19-2020, 10:58 AM

Quote:

Originally Posted by GeauxTigers1

I will absolutely look into that! Wouldn’t that cause problems with the OEM dif tho if that was the case?

The OEM VLSD takes different stub axles than the OS Giken. When it was installed, if they just swapped them over, that is the problem. One needs to be changed.

Rusty · 07-19-2020, 01:06 PM

Here's a pic of the stub axles. The one in the middle gets replaced with the one on the right.

Spooler · 07-19-2020, 01:14 PM

Quote:

Originally Posted by Rusty

Here's a pic of the stub axles. The one in the middle gets replaced with the one on the right.

I was trying to find that picture earlier. Glad you knew where it was.

Rusty · 07-19-2020, 01:26 PM

Quote:

Originally Posted by Spooler

I was trying to find that picture earlier. Glad you knew where it was.

It's in with the rest of my pictures.

Spooler · 07-20-2020, 07:25 PM

Engine is out. They had to order a couple more parts to do the swap. They are not wasting any time.

Spooler · 07-21-2020, 11:52 AM

Thinking about the front end lift Aero problem I have. Brainstorming on what to try.

Ghostvette · 07-21-2020, 11:56 AM

Quote:

Originally Posted by Spooler

Thinking about the front end lift Aero problem I have. Brainstorming on what to try.

The vents like Rusty has on his fenders maybe?

Elmo370z · 07-21-2020, 12:20 PM

Quote:

Originally Posted by Ghostvette

The vents like Rusty has on his fenders maybe?

Has to create aero under the car. Box and seal
Off the front end.

Elmo370z · 07-21-2020, 12:21 PM

https://youtu.be/lxGwr7yi0UY

Never felt like my front end got light

Spooler · 07-21-2020, 01:25 PM

Quote:

Originally Posted by Elmo370z

https://youtu.be/lxGwr7yi0UY

Never felt like my front end got light

Stock, I never did either. That is a whole new ballgame now. It may just be I need to make a rear height adjustment so my car won't squat so much under power. I may need to redo the whole rear suspension with better pickup points.
MA can do it but it won't be cheap.

Spooler · 07-21-2020, 01:37 PM

When you can count the tracspec vents in the hood, you might have a problem. LOL

Elmo370z · 07-21-2020, 01:46 PM

Quote:

Originally Posted by Spooler

Stock, I never did either. That is a whole new ballgame now. It may just be I need to make a rear height adjustment so my car won't squat so much under power. I may need to redo the whole rear suspension with better pickup points.
MA can do it but it won't be cheap.

Ahhh makes sense. Tuning

Hotrodz · 07-21-2020, 02:15 PM

Quote:

Originally Posted by Spooler

When you can count the tracspec vents in the hood, you might have a problem. LOL

I have never had issues with lift even at 160 and stock setup. Well the stock undertray came unbuttoned that is. Anyway, the only thing was that I was lower on Teng lowering springs. I have seen CFD rendering and the Nismo aero stops working at about 90 to 100mph and you start getting lift from that point. Lowering the car 1" significantly decreases drag and lift but it will still be a factor without a front splitter and removing area of high pressure. The hood vents remove the highest area of high pressure, the next place is the fenders. There is a reason all racecars have a way to remove high pressure from the wheel wells.

Sent from my SM-G965U using Tapatalk

Spooler · 07-21-2020, 02:30 PM

Quote:

Originally Posted by Hotrodz

I have never had issues with lift even at 160 and stock setup. Well the stock undertray came unbuttoned that is. Anyway, the only thing was that I was lower on Teng lowering springs. I have seen CFD rendering and the Nismo aero stops working at about 90 to 100mph and you start getting lift from that point. Lowering the car 1" significantly decreases drag and lift but it will still be a factor without a front splitter and removing area of high pressure. The hood vents remove the highest area of high pressure, the next place is the fenders. There is a reason all racecars have a way to remove high pressure from the wheel wells.

Sent from my SM-G965U using Tapatalk

That is why I am leaning toward the suspension setup. it's free, may go with Phunks idea and raise the rear. I will have better traction and an even car at WOT.

Spooler · 07-21-2020, 02:40 PM

Still kicking around ideas. I can lower the front some more. That may be the way to go. I am at 1/8in. rake right now. Maybe I go to a 1/4in. rake.

07-20-2020, 07:25 PM	#2510 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Engine is out. They had to order a couple more parts to do the swap. They are not wasting any time. FL 4Motion, GeauxTigers1, Rusty and 6 others like this.

07-21-2020, 02:40 PM	#2520 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Still kicking around ideas. I can lower the front some more. That may be the way to go. I am at 1/8in. rake right now. Maybe I go to a 1/4in. rake. FL 4Motion and GeauxTigers1 like this. Last edited by Spooler; 07-21-2020 at 02:54 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM

07-21-2020, 11:52 AM	#2511 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	Thinking about the front end lift Aero problem I have. Brainstorming on what to try.

07-21-2020, 12:21 PM	#2514 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	https://youtu.be/lxGwr7yi0UY Never felt like my front end got light

07-21-2020, 01:37 PM	#2516 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,834 Drives: 2013 Nismo 370z Rep Power: 2684392	When you can count the tracspec vents in the hood, you might have a problem. LOL