Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 02-20-2020, 08:14 PM

Quote:

Originally Posted by redondoaveb

That's what Nik told me too at the time. I do like their set up.

Me too. If I had a non-pressurized expansion tank I would buy SOHO's setup and wouldn't think twice.
I could convert mine, I just don't want to.

Hotrodz · 02-20-2020, 11:26 PM

Quote:

Originally Posted by Spooler

One thing I didn't have for my build was Catch cans. I think I have finally found what I was looking for. I like the SOHO catch can combo but I don't like not being able to see the coolant level and I would need to convert to a non-pressurized setup. I am leaning toward getting the Radium catch can setup. Looks like a quality kit.

Radium makes quality products!

Sent from my SM-G965U using Tapatalk

Spooler · 02-21-2020, 11:19 AM

I am going to take the motor to Mazworx without the oil pump in hand. Trying to figure out when to make the trip.

Hotrodz · 02-21-2020, 12:08 PM

Quote:

Originally Posted by Spooler

I am going to take the motor to Mazworx without the oil pump in hand. Trying to figure out when to make the trip.

Hopefully they ship next week. You still got time regardless.

Sent from my SM-G965U using Tapatalk

Spooler · 02-21-2020, 12:52 PM

Quote:

Originally Posted by Hotrodz

Hopefully they ship next week. You still got time regardless.

Sent from my SM-G965U using Tapatalk

Yeap, I have my JWT C2 cams in hand. 4 to 6 weeks wait on the custom Cp pistons at 11:1.

Hotrodz · 02-21-2020, 01:31 PM

Quote:

Originally Posted by Spooler

Yeap, I have my JWT C2 cams in hand. 4 to 6 weeks wait on the custom Cp pistons at 11:1.

I thought you might go 9:1!

Sent from my SM-G965U using Tapatalk

Spooler · 02-21-2020, 02:20 PM

Quote:

Originally Posted by Hotrodz

I thought you might go 9:1!

Sent from my SM-G965U using Tapatalk

Noop, sticking to what I had. I was very happy with off boost response. If I don't have any knock issues or have to reduce the timing due to said knock, I am golden. The new motor just has to hold in the headgasket area, It should.

Whjaxn17 · 02-21-2020, 02:32 PM

Quote:

Originally Posted by Hotrodz

I thought you might go 9:1!

and +30lbs of boost

Quote:

Originally Posted by Spooler

Noop, sticking to what I had. I was very happy with off boost response. If I don't have any knock issues or have to reduce the timing due to said knock, I am golden. The new motor just has to hold in the headgasket area, It should.

Well, if it ain't broke

Spooler · 02-21-2020, 02:41 PM

Quote:

Originally Posted by Whjaxn17

Well, if it ain't broke

It's broke dude. LMAO Everything was on the table. I did consider it very hard.

Whjaxn17 · 02-21-2020, 02:56 PM

Quote:

Originally Posted by Spooler

It's broke dude. LMAO Everything was on the table. I did consider it very hard.

I know, I just meant if you were happy with the off boost response and everything performance wise. The only issue was the headgasket.

redondoaveb · 02-21-2020, 03:34 PM

Quote:

Originally Posted by Spooler

Noop, sticking to what I had. I was very happy with off boost response. If I don't have any knock issues or have to reduce the timing due to said knock, I am golden. The new motor just has to hold in the headgasket area, It should.

Smart move staying with the high compression motor.

Spooler · 02-21-2020, 07:51 PM

Quote:

Originally Posted by redondoaveb

Smart move staying with the high compression motor.

It may be a bad move. LOL We shall see. It takes xxxx amount of cylinder pressure to make xxxx amount of power. It doesn't matter if it is high compression and lower boost or low compression and higher boost.

Spooler · 02-21-2020, 07:56 PM

Quote:

Originally Posted by Whjaxn17

I know, I just meant if you were happy with the off boost response and everything performance wise. The only issue was the headgasket.

I was. At 800hp it would get a little un-ruley. I think I am going to stick with 22psi of boost and just go with Ignite Red 114 oct. or Ethanol One 117 oct. I really don't want to turn it up unless I have a better ECU. Motec M150. I will then be able to add some channels to keep an eye on things better via logging. Number one thing is coolant pressure. Other things are intake temps before and after intercooler (CAC), oil pressure, etc. That way we can program the ECU to shut it down before it has major engine damage.

jwick · 02-21-2020, 08:06 PM

Quote:

Originally Posted by Spooler

Noop, sticking to what I had. I was very happy with off boost response. If I don't have any knock issues or have to reduce the timing due to said knock, I am golden. The new motor just has to hold in the headgasket area, It should.

So the head gasket let go?

redondoaveb · 02-21-2020, 08:18 PM

Quote:

Originally Posted by Spooler

It may be a bad move. LOL We shall see. It takes xxxx amount of cylinder pressure to make xxxx amount of power. It doesn't matter if it is high compression and lower boost or low compression and higher boost.

I still like the idea of having off boost power.

02-21-2020, 11:19 AM	#2208 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,832 Drives: 2013 Nismo 370z Rep Power: 2684392	I am going to take the motor to Mazworx without the oil pump in hand. Trying to figure out when to make the trip. Rusty, Hotrodz, jchammond and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 09:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 12:40 PM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 12:12 PM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 03:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 10:27 AM